Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 7 marks

Pick again
Print
1Multiple choice1 markTranslators Swap Remove

A program contains a syntax error. An interpreter reports the error as soon as it finds it.

Identify when a compiler reports the syntax errors it finds in the source code.

[1 mark]
  • AAfter each line is translated
  • BAt the end of translating the program
  • CWhen the first error is found
  • DWhen the object code is run
Mark scheme
  • B At the end of translating the program (1)
  • The only correct answer is B. The correct answer is at the end of translating the program.
  • A is not correct because a compiler translates the whole program and does not report an error after each line; reporting after each line is how an interpreter behaves
  • C is not correct because a compiler does not stop at the first error; it finishes translating and reports the errors it finds at the end
  • D is not correct because syntax errors are found during translation, before the object code is run
Example answers and how they were marked
Full marks1/1

B At the end of translating the program

Why: Chosen option states that errors are reported once the whole program has been translated, as a compiler does (1).

No marks0/1

A After each line is translated

Why: Near miss: reporting an error after each line is the behaviour of an interpreter, not a compiler, so no mark.

No marks0/1

C When the first error is found

Why: Misconception that a compiler stops and reports at the first error it finds; a compiler reports the errors at the end of translation, so no mark.

2Short recall2 marksLow and High Level Languages Swap Remove

Programs written in a high-level language are often machine independent.

Define the term machine independence.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • The (same) program/source code can run on different types/makes of computer/processor (1)
  • With few/no changes (to the program code) (1)
  • The same source code can be translated for each type of processor (1)
  • A different compiler/interpreter is used for each type of processor (1)
  • The program does not depend on one specific type of processor/hardware (1)
  • Only one version of the program needs to be written/kept (1)
  • The program is portable between different computers (1)

Allow 'different computers' as meaning different types of computer/processor.

Do not accept a program that will only run on one type of computer / the computer it was written on.

Do not accept written in machine code/binary, is translated into machine code, compiled/interpreted, is a low-level language.

Example answers and how they were marked
Full marks2/2

The same program can run on different types of computer without being changed.

Why: Two creditworthy parts: runs on different types/makes of computer/processor (1); with few/no changes (1).

Some marks1/2

A program can run on different computers.

Why: Creditworthy point: can run on different types/makes of computer/processor (1), with 'different computers' allowed by the guidance. No second part about changes or translation.

No marks0/2

A program is written in machine code so the computer can understand it.

Why: Misconception: machine code is not machine independence; the mark scheme does not accept this, and no other creditworthy point is given.

3Describe2 marksLow and High Level Languages Swap Remove

A programmer has written a program in assembly language.

Describe why it is necessary to translate the program into machine code before it can be run.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • The processor/CPU can only execute machine code/binary instructions (1) so the assembly instructions must be converted into machine code before the program can run (1)
  • Each assembly instruction/mnemonic matches/corresponds to one machine code instruction (1) so each line must be replaced with the machine code the processor executes (1)
  • The program is written using mnemonics (1) that must be translated into machine code for the processor to carry out the instructions (1)
  • The hardware/processor does not understand assembly language directly (1) so it must be translated into machine code that the processor can execute (1)

Do not accept 'assembly language is a low-level language'.

Do not accept 'it is hard to understand' or 'it is not English'.

Do not accept benefits, such as 'machine code runs faster' or 'the program will run more quickly'.

Do not accept 'an assembler/a translator converts it' on its own, with no reference to the processor only being able to execute machine code/binary.

Do not accept responses about high-level languages or about compilers/interpreters.

Example answers and how they were marked
Full marks2/2

The processor can only execute machine code, so the assembly instructions must be converted into machine code before the program can run.

Why: States what the processor can execute (1) and links it to converting the program's instructions into machine code (1).

Some marks1/2

Each assembly instruction matches one machine code instruction.

Why: Correct point about the one-to-one match (1) but no development saying that this is because the processor only executes machine code.

No marks0/2

Because an assembler translates assembly language into machine code.

Why: Names the translator but gives no reason tied to the processor only being able to execute machine code, so no mark; this is in the 'Do not accept' guidance.

4Explain2 marksTranslators Swap Remove

A programmer writes a program in a high-level language. The program is translated by a compiler.

Explain why a compiler must translate the whole program before any of it can be executed.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • The compiler produces object code/machine code for the whole program (1) so there is no complete executable until every line has been translated (1)
  • The compiler translates all the source code before producing the object code (1) so the program cannot start until translation has finished (1)
  • The compiler checks the whole program for errors during translation (1) so all of the source code must be read before an executable can be produced (1)

For both marks, the expansion must follow/associate with the statement.

Allow 'in one go'/'all at once' for the translation point, but this does not earn the second mark unless it is linked to why the program cannot be executed until translation has finished.

A statement that the whole program is translated, with no linked reason about when the program can be executed, earns 1 mark only.

Do not accept 'a compiler is faster' or 'compiled code runs faster' on its own; this does not explain why translation must finish before execution.

Do not accept 'it translates and runs the program one line at a time', as this describes an interpreter.

Example answers and how they were marked
Full marks2/2

A compiler produces object code for the whole program, so there is no complete executable until every line has been translated.

Why: Object code for the whole program (1) linked to there being no complete executable until every line is translated (1).

Some marks1/2

A compiler translates the whole program in one go.

Why: Translation of the whole program only (1); no linked reason about when the program can be executed, so the second mark is not awarded.

No marks0/2

A compiler translates and runs the program one line at a time, so it stops when it finds an error.

Why: Confuses a compiler with an interpreter; nothing about translating the whole program before execution, so no creditworthy point.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 71
Data Protection Act 17 questions Impact of AI 18 questions Intellectual Property 18 questions Software Licences 18 questions

5.3 Cybersecurity

Build a paper on this topic 36
Malware 18 questions Social Engineering 18 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.