Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 9 marks

Pick again
Print
1Short recall3 marksFetch Decode Execute Cycle Swap Remove

The fetch-decode-execute cycle is used by the CPU.

State three things that happen during the fetch stage.

[3 marks]
Mark scheme

Award one mark for any of the following up to a maximum of three marks:

  • The address (of the next instruction) is sent from the CPU to main memory / placed on the address bus (1)
  • The (next) instruction is fetched/read from main memory (RAM) (1)
  • The instruction is brought/copied into the CPU / received into the MDR (1)
  • The program counter (PC) is incremented/updated to hold the address of the next instruction (1)

Allow 'the PC/MAR is placed on the address bus' for the address being sent to main memory.

Allow 'the MDR receives the instruction' for the instruction being brought into the CPU.

Do not award a second mark for the instruction being fetched from main memory and the instruction being brought into the CPU; these are the same point.

Do not award 'the instruction is transferred along the data bus' on its own; this is the same point as the instruction being fetched from main memory.

Do not accept answers about decoding the instruction, e.g. 'the instruction is fetched from RAM and decoded', as decoding happens in the decode stage.

Do not accept answers about the execute stage, e.g. 'the ALU carries out the calculation' or 'the result of a calculation is stored in a register', as these happen in the execute stage.

Example answers and how they were marked
Full marks3/3

The address of the next instruction is sent to main memory, the instruction is fetched from RAM, and the program counter is incremented.

Why: Address sent to main memory (1), instruction fetched from RAM (1) and program counter incremented (1).

Some marks1/3

The instruction is fetched from main memory and then decoded.

Why: Fetching the instruction from main memory (1); decoding happens in the decode stage, so it is not creditworthy in the fetch stage.

No marks0/3

The ALU carries out the calculation and the result is stored in a register.

Why: The ALU carrying out a calculation and storing a result happen in the execute stage, not the fetch stage, so no point is creditworthy.

2Short recall2 marksEmbedded Systems Swap Remove

A digital camera contains an embedded system.

Give two functions that the embedded system performs in the digital camera.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Focus the lens/autofocus (1)
  • Control the shutter (speed) (1)
  • Control the flash/decide when the flash is needed (1)
  • Measure the light level to set the exposure/the aperture (1)
  • Stabilise the lens/image stabilisation (1)
  • Zoom the lens in and out (1)
  • Detect a face/smile (1)

Do not accept 'take a photograph'/'take a picture'/'capture an image', as taking photographs is the function of the camera, which is given in the question.

Do not accept 'press the button' as this is an action of the user, not a function performed by the embedded system.

Do not accept vague answers such as 'use the camera', 'turn the camera on and off' or 'make the camera work', which do not name a function that the embedded system performs.

Example answers and how they were marked
Full marks2/2

It focuses the lens and decides when the flash should fire.

Why: Focus the lens (1) and control the flash (1).

Some marks1/2

It controls the zoom and takes a picture when the button is pressed.

Why: Zoom the lens credited (1); 'takes a picture' is not accepted because taking photographs is the function of the camera, which is given in the question, and 'press the button' is the user's action, not a function of the embedded system.

No marks0/2

It takes a picture when the button is pressed and it makes the camera work.

Why: No mark: 'takes a picture' repeats the camera's function given in the question, 'press the button' is an action of the user, and 'makes the camera work' is too vague to name a function.

3Explain2 marksEmbedded Systems Swap Remove

An engine control unit (ECU) in a car is an embedded system.

Explain one benefit of using an embedded system for the engine control unit instead of a general purpose computer.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • (The ECU) is more reliable/less likely to crash (1) because it only runs the one program/has a single purpose (1)
  • (The ECU) cannot be affected by other software/viruses (1) because it cannot run other software/it can only run the program it was made for (1)
  • (The ECU) is cheaper (1) because it has limited processing resources/less memory/simple components (1)
  • (The ECU) uses less power (1) because it has limited processing resources/a simpler processor (1)
  • (The ECU) is smaller (1) because it has fewer components/less memory than a general purpose computer (1)

For both marks, the expansion must follow/associate with the statement.

A suitable benefit stated on its own earns one mark.

Do not accept a description or a location given as the reason, e.g. 'because it is part of the car', 'because it is inside the engine', 'because it is embedded'.

Do not accept a description of an embedded system on its own as the benefit, e.g. 'it does one specific job' or 'it is part of the car'.

Do not accept 'it is faster'/'it has a more powerful processor' as embedded systems have limited processing resources.

Example answers and how they were marked
Full marks2/2

It is more reliable than a general purpose computer because it only runs the one program so it will not crash and stop the engine working.

Why: Benefit stated (1) with a linked reason (1); the reason shows why only running one program makes it reliable.

Some marks1/2

It is more reliable because it is part of the car's engine.

Why: Only the benefit earns a mark (1); being part of the car is a location, not a linked reason why it is reliable.

No marks0/2

It is faster than a general purpose computer because it is embedded in the engine.

Why: Misconception that an embedded system is faster; embedded systems have limited processing resources, so neither point nor reason is creditworthy.

4Explain2 marksPrimary Memory Swap Remove

RAM is used to store data while a computer is running.

Explain one reason why the data in RAM is lost when a computer is switched off.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • RAM is volatile (memory) (1) because it needs a constant/continuous power supply to hold/store the data it contains (1)
  • Data is held in RAM as electrical states/charges (1) so when the power supply is removed these states cannot be kept/refreshed and the data is lost (1)
  • RAM is used as short-term storage for the data and instructions currently in use (1) because it can only hold them while the computer has power (1)

For both marks, the expansion must follow/associate with the statement and must link the loss of the data to the power supply being removed.

Accept 'RAM is volatile' on its own for the first mark; the second mark is only awarded for a linked reason about the power supply.

Do not accept 'RAM is temporary/short-term memory' or 'RAM is cleared when the computer is switched off' on its own for both marks, as neither gives a reason.

Do not accept answers that say the data is deleted/cleared/erased by the computer or the operating system, or that the data is saved/moved to secondary storage, without saying why the data cannot be kept (e.g. because RAM needs power/is volatile).

Example answers and how they were marked
Full marks2/2

RAM is volatile memory, which means it needs a constant power supply to keep the data it is holding. When the power is switched off, the data is lost.

Why: Linked point (1) for 'RAM is volatile memory' and reason (1) for needing a constant power supply to hold the data.

Some marks1/2

The data in RAM is lost because RAM is volatile memory.

Why: Point (1) for 'RAM is volatile' but no linked reason about the power supply, and the mark scheme states that 'RAM is volatile' alone earns only the first mark.

No marks0/2

The data is deleted from RAM by the operating system when the computer is shut down so that the memory is free for next time.

Why: No creditworthy point: the answer says the data is deleted without saying why it cannot be kept, which the mark scheme's 'Do not accept' line rules out.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.