Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 604 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

3 questions · 11 marks

Pick again
Print
1Short recall3 marksFetch Decode Execute Cycle Swap Remove

The fetch-decode-execute cycle is used by the CPU.

State three things that happen during the fetch stage.

[3 marks]
Mark scheme

Award one mark for any of the following up to a maximum of three marks:

  • The address (of the next instruction) is sent from the CPU to main memory / placed on the address bus (1)
  • The (next) instruction is fetched/read from main memory (RAM) (1)
  • The instruction is brought/copied into the CPU / received into the MDR (1)
  • The program counter (PC) is incremented/updated to hold the address of the next instruction (1)

Allow 'the PC/MAR is placed on the address bus' for the address being sent to main memory.

Allow 'the MDR receives the instruction' for the instruction being brought into the CPU.

Do not award a second mark for the instruction being fetched from main memory and the instruction being brought into the CPU; these are the same point.

Do not award 'the instruction is transferred along the data bus' on its own; this is the same point as the instruction being fetched from main memory.

Do not accept answers about decoding the instruction, e.g. 'the instruction is fetched from RAM and decoded', as decoding happens in the decode stage.

Do not accept answers about the execute stage, e.g. 'the ALU carries out the calculation' or 'the result of a calculation is stored in a register', as these happen in the execute stage.

Example answers and how they were marked
Full marks3/3

The address of the next instruction is sent to main memory, the instruction is fetched from RAM, and the program counter is incremented.

Why: Address sent to main memory (1), instruction fetched from RAM (1) and program counter incremented (1).

Some marks1/3

The instruction is fetched from main memory and then decoded.

Why: Fetching the instruction from main memory (1); decoding happens in the decode stage, so it is not creditworthy in the fetch stage.

No marks0/3

The ALU carries out the calculation and the result is stored in a register.

Why: The ALU carrying out a calculation and storing a result happen in the execute stage, not the fetch stage, so no point is creditworthy.

2Short recall2 marksUnits & Conversion Swap Remove

Data storage is measured in binary multiples.

Define the term bit.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • A binary digit (1)
  • Has the value 0 or 1 (1)
  • The smallest unit of data storage (1)
  • A single 0 or 1 (1)

Allow binary digit/binary place value for binary digit

Allow a single binary digit for a single 0 or 1

Do not accept a group of 8 bits/half a nibble of 4 bits, which describe a byte or a nibble

Do not accept a binary number/binary on its own

Example answers and how they were marked
Full marks2/2

A binary digit that can have the value 0 or 1.

Why: A binary digit (1) and has the value 0 or 1 (1).

Some marks1/2

It is the smallest unit of data storage.

Why: Smallest unit of data storage (1), but does not state that it is a binary digit or that it has the value 0 or 1.

No marks0/2

A group of 8 bits.

Why: Describes a byte, not a bit; no creditworthy point and named in the Do not accept line.

3Discuss6 marksFile Management Swap Remove

A student keeps school work and photographs on a laptop. The laptop's storage is almost full. The student uses the operating system's file management.

Discuss the file management tasks the operating system provides that the student can use to manage these files.

Your answer should include:

  • saving files
  • deleting files
  • copying files
[6 marks]
Mark scheme

Indicative content

Saving files

  • When saving, the operating system lets the student choose the folder and the file name, so new work goes into the correct subject folder instead of the root.
  • The operating system warns the student before a file with the same name is overwritten, so an earlier version of an essay is not lost by accident.
  • The operating system writes the file into free space on the laptop and records where it is, so the student can open it again later.

Deleting files

  • The operating system lets the student delete files that are no longer needed, which frees space so new photographs can be saved.
  • Deleted files are usually moved to the recycle bin first, so a file removed by mistake can be restored.
  • Emptying the recycle bin removes the data permanently and releases the space for other files.

Copying files

  • The operating system lets the student copy files to a USB flash drive, so there is a second copy if the laptop is lost or damaged.
  • Copying leaves the original file in place, so the student can carry on working on the laptop's copy.
  • A whole folder can be copied in one action, including its subfolders, which is quicker than copying each file separately.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Level 3 responses must cover saving, deleting and copying.

Do not accept answers about the processor or defragmentation as file management tasks.

Example answers and how they were marked
Full marks6/6

When the student saves a file, the operating system lets them pick the folder and name, and it warns before a file with the same name is overwritten, so an earlier essay is not lost. Because the laptop is nearly full, the student can delete photographs they no longer need; these go to the recycle bin at first, so a file removed by mistake can be restored, and emptying the bin releases the space for good. The student can also copy their school work to a USB flash drive, which leaves the original on the laptop and gives a backup if the laptop is damaged.

Why: Saving (choice of folder and name, overwrite warning), deleting (recycle bin, restoring, releasing space) and copying (backup on a USB drive, original kept) are all explained and tied to the student's full laptop.

Some marks3/6

The student can save files into folders so they know where they are. They can delete files they do not need to free up space. They can copy files onto a memory stick.

Why: Three tasks are named with a reason for deleting, but saving and copying are not developed and there is little linkage between the points, so Level 2.

No marks0/6

The operating system saves files automatically and deletes old files when the RAM is full. The processor copies the files to the hard disk.

Why: No creditworthy point: files are not saved automatically, RAM filling does not trigger file deletion, and copying is not done by the processor. Typical confusion between file management and memory or processor management.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 18
Data Protection Act 14 questions Impact of AI 4 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.