Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 514 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

8 questions · 18 marks

Pick again
Print
1Multiple choice1 markTranslators Swap Remove

Identify the type of translator that translates the whole program into machine code before it is run.

[1 mark]
  • AAssembler
  • BCompiler
  • CInterpreter
  • DLinker
Mark scheme
  • B Compiler (1)
  • The only correct answer is B. The correct answer is compiler.
  • A is not correct because an assembler translates assembly language code into machine code, not a high-level program
  • C is not correct because an interpreter translates and executes the code line by line, without producing a complete machine code program first
  • D is not correct because a linker combines object code files into a single executable, it does not translate source code
Example answers and how they were marked
Full marks1/1

B Compiler

Why: Selected the compiler, the translator that translates the whole program into machine code before it is run (1).

No marks0/1

C Interpreter

Why: Near miss: an interpreter translates and executes the code line by line, so it does not translate the whole program into machine code before it is run.

No marks0/1

A Assembler

Why: Confuses the translators: an assembler translates assembly language code into machine code, it does not translate a high-level program as a whole.

2Short recall1 markTranslators Swap Remove

An interpreter translates high-level code.

State what happens to the translation of a program when an interpreter finds a syntax error.

[1 mark]
Mark scheme

Award one mark for any of the following:

  • Translation/execution stops (when the error is found) / the rest of the program is not translated/executed (1)

Allow stops/terminates/halts when the error is found

Do not accept shows/displays an error message on its own

Do not accept the whole program is translated and errors are reported at the end

Do not accept translates line by line on its own

Example answers and how they were marked
Full marks1/1

The translation stops as soon as the error is found, so the rest of the program is not translated.

Why: Translation stops when the error is found (1).

No marks0/1

An error message is displayed.

Why: Only an error message; it does not say translation stops, and the scheme does not accept a displayed error message on its own.

No marks0/1

The whole program is translated and all the errors are reported at the end.

Why: Describes a compiler; the scheme does not accept errors being reported at the end of translating the whole program.

3Short recall2 marksLow and High Level Languages Swap Remove

Device drivers allow hardware devices to work with a computer system.

Give two advantages of using a low-level programming language to write device drivers.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • It can control/manipulate the hardware (components/registers/memory locations) directly (1)
  • Each instruction maps to a single machine-code instruction, so the behaviour/timing can be controlled precisely (1)
  • The code can run very quickly / has a fast execution time (1)
  • The code uses less memory/RAM (1)
  • The code can be optimised for a particular processor/chipset (1)

Only award one mark where both 'controls the hardware' and 'accesses registers/memory locations' are given, as these are the same point.

Do not accept 'it is closer to the hardware' without saying that it controls or accesses the hardware directly.

Do not accept easier/faster to write/program/learn/understand/debug (these are advantages of high-level languages).

Do not accept faster/quicker without qualification.

Do not accept portable/machine independent.

Do not accept does not need to be translated/compiled (assembly language must be assembled).

Do not accept it is a low-level language / a repeat of the question.

Example answers and how they were marked
Full marks2/2

It can control the hardware directly and the code runs very quickly.

Why: Two creditworthy advantages: controls the hardware directly (1); fast execution (1).

Some marks1/2

It uses less memory than a high-level language.

Why: Creditworthy point: uses less memory/RAM (1). Only one advantage given.

No marks0/2

It is easier to understand and debug than a high-level language.

Why: These are advantages of high-level languages, not low-level ones; the mark scheme does not accept easier to understand or debug.

4Short recall2 marksTranslators Swap Remove

An interpreter is a type of translator.

Define the term interpreter.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Translates/converts (high-level/source) code one line/statement at a time (1)
  • Translates/converts the code and executes/runs each line as it goes (1)
  • Executes/runs each line/statement immediately after it is translated (1)
  • Reports/stops with an error message as soon as a syntax error is found (1)

Allow 'runs' for executes, 'converts' for translates and 'instruction' for line/statement

Do not accept translates the whole program before it is run

Do not accept produces/creates object code, an executable file or machine code that is saved

Example answers and how they were marked
Full marks2/2

An interpreter is a program that translates high-level code line by line. Each line is run as soon as it has been translated, so any errors are shown straight away.

Why: Line-by-line translation (1) and each line executed immediately (1); the point about errors would be a third creditworthy point but the maximum is two.

Some marks1/2

An interpreter translates code one line at a time.

Why: Line-by-line translation (1); no point for immediate execution.

No marks0/2

An interpreter translates the whole program before it is run.

Why: Near-miss describing a compiler; the scheme's 'Do not accept' line rules out whole-program translation.

5Describe2 marksTranslators Swap Remove

A high-level program must be translated into machine code before it can be run.

Describe how a compiler and an interpreter differ in when the translated code is executed.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • The interpreter executes each line as soon as it has been translated (1) so translation and execution happen together/at the same time (1)
  • The compiler translates the whole program first (1) and the machine code is run later/separately (1)
  • The interpreter translates the code and runs it while the program is running (1) whereas the compiler does not run the code it produces (1)
  • The compiler produces translated code that is executed only after all the translation has finished (1) but the interpreter executes each line immediately (1)

Allow 'translates one line at a time' where it is linked to executing each line immediately.

Do not accept answers that only state that a compiler is faster/an interpreter is slower, without reference to when execution happens.

Do not accept answers that only give object code, error reporting or portability, without reference to when execution happens.

Do not accept the compiler executing the program as it translates it.

Example answers and how they were marked
Full marks2/2

The compiler translates the code first and the program is executed afterwards, but the interpreter executes each line as soon as it has been translated.

Why: Compiler translates the whole program first and it is executed afterwards (1) and interpreter executes each line as soon as it is translated (1).

Some marks1/2

The interpreter executes each line immediately after translating it.

Why: Correct interpreter timing (1); no comparison with when the compiler's translated code is executed.

No marks0/2

The compiler executes the program line by line as it translates it.

Why: Reverses the two translators; a compiler does not execute the program it translates, so no mark.

6Explain2 marksLow and High Level Languages Swap Remove

High-level languages are designed to be easier to learn than low-level languages.

Explain one reason why a high-level language is easier to learn than a low-level language.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Statements are written in English-like words/use maths symbols (1) so the programmer can understand more easily what each one does (1)
  • The language uses meaningful names for variables/structured constructs such as loops (1) so the code is easier to read/follow (1)
  • One statement translates into several machine code instructions (1) so there are fewer instructions to learn/understand for the same task (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'it is easier' / 'it is simpler' on its own, without saying what is easier/simpler.

Do not accept 'the computer understands it directly' / 'it does not need translating'.

Do not award answers about the program running faster or using less memory, as these are not about ease of learning.

Example answers and how they were marked
Full marks2/2

Statements are written in English-like words (1) so the programmer can understand more easily what each line does (1).

Why: Linked point (1) of English-like statements and reason (1) that these are easier to understand.

Some marks1/2

It uses meaningful names for variables (1) so it is easier.

Why: Point (1) that meaningful names for variables are used, but 'so it is easier' is not accepted as the linked reason.

No marks0/2

Because the computer can understand high-level code without translation.

Why: Misconception that high-level code is understood directly by the computer; no creditworthy characteristic of the language is given.

7Explain2 marksLow and High Level Languages Swap Remove

A programmer writes the same program in a low-level language and in a high-level language.

Explain one reason why the program written in the low-level language may run faster.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • The programmer can choose the most efficient instructions/registers to use (1) so the program completes its task in fewer steps (1)
  • The programmer can optimise the code for the processor (1) because low-level instructions give direct control of registers/memory (1)
  • Each low-level instruction maps to one machine code instruction (1) so fewer instructions are executed than for the equivalent high-level code (1)
  • The translated code is smaller (1) so fewer instructions are fetched from memory and executed (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'it is low-level' / 'it is closer to machine code' / 'low-level code is faster' on its own without a reason why it makes the program run faster.

Do not accept 'high-level code has to be translated' / 'high-level code is interpreted' on its own without saying why that makes the program slower.

Do not accept 'the code is smaller' on its own without saying that this means fewer instructions are fetched/executed.

Do not accept 'it is easier to write' or 'quicker to type' as a reason for faster execution.

Example answers and how they were marked
Full marks2/2

The programmer can choose the most efficient instructions and registers to use (1) so the program completes its task in fewer steps (1).

Why: Linked point (1) of choosing efficient instructions/registers and reason (1) that the task is completed in fewer steps, so it runs faster.

Some marks1/2

Each low-level instruction maps to one machine code instruction (1) so the program is shorter to type.

Why: Point (1) that one low-level instruction maps to one machine code instruction, but being shorter to type does not explain why the program runs faster, so no second mark.

No marks0/2

Because it is closer to machine code.

Why: 'Closer to machine code' alone gives no reason why that makes the program run faster, and the mark scheme does not accept it on its own.

8Discuss6 marksLow and High Level Languages Swap Remove

A software company is writing a new program that will be sold to users who have different types of computer. The program does not need to control the hardware of the computer directly. The company must decide whether to write the program in a high-level language or a low-level language.

Discuss whether the company should use a high-level language or a low-level language to write this program.

Your answer should consider:

  • machine independence
  • processor specificity
  • how the code is translated for each type of computer.
[6 marks]
Mark scheme

Indicative content

Machine independence

  • A high-level language is machine independent, so the same source code can be run on different types of computer with few or no changes.
  • The company can write the program once and sell it to users with different computers, without rewriting the code for each type of computer.
  • Only one version of the program needs to be written and maintained, so development takes the company less time.

Processor specificity

  • A low-level language is processor-specific, so a program written for one processor will not run on a different processor without being rewritten.
  • Assembly language instructions depend on the instruction set of the particular processor, so the company would need a separate version of the program for each type of computer.
  • Writing a separate low-level version for every type of computer would take the company much longer than writing one high-level program.
  • Low-level code gives direct control of the hardware of one processor, so it is better suited to device drivers than to a program that must run on many different computers.

Translation

  • High-level source code is translated for each type of computer by a compiler or an interpreter, so one version of the source code is enough for all the users.
  • Assembly language is translated into machine code by an assembler, and the assembler produces machine code for one specific processor only.
  • Machine code is already in a form that one particular processor can execute directly, but the same machine code will not run on a different processor.
  • Each high-level statement translates into several machine code instructions, so the programmer does not need to know the instruction set of the processor.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

  • Level 3 responses must cover both high-level machine independence and low-level processor specificity, with the effect on the company's decision.
  • Do not award low-level language, assembly language or machine code as portable, or 'high-level languages are written in English/like English' as a reason for machine independence.
Example answers and how they were marked
Full marks6/6

A high-level language is machine independent, so the company can write the program once and it will run on different types of computer with few or no changes. A different compiler is used for each type of processor to translate that same source code into the machine code for that computer, so the company can sell one program to all of its users. A low-level language is processor-specific, so a program written in assembly for one processor will not run on a different one. The assembler produces machine code for one particular instruction set, so the company would need to write a separate version for each type of computer, which would take much longer. As the program does not need to control the hardware directly, the company should use a high-level language.

Why: Develops high-level machine independence with the compiler translating for each processor, and low-level processor specificity with the assembler producing machine code for one instruction set, both applied to the company's decision, in a coherent and sustained argument: Level 3, 6 marks.

Some marks3/6

A high-level language is machine independent, so the company can write the program once. A different compiler is used for each type of computer to translate the code, so users with different computers can all run the same program. A low-level language is processor-specific, so it would not be as suitable for the company.

Why: Machine independence is linked to the compiler and applied to the users, but processor specificity is only asserted and no translation of low-level code is given, so the reasoning is not sustained: Level 2, 3 marks.

Some marks1/6

High-level languages are machine independent because they are written in English, so the company can sell the program to anyone. Low-level languages are machine code, so they can be translated to run on any type of computer.

Why: One basic point that high-level languages are machine independent, applied by selling to anyone (1). 'Written in English' is not a reason for machine independence and low-level code is not portable, so neither is credited: Level 1, 1 mark.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.