Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 514 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

6 questions · 11 marks

Pick again
Print
1Multiple choice1 markTranslators Swap Remove

Identify the type of translator that translates the whole program into machine code before it is run.

[1 mark]
  • AAssembler
  • BCompiler
  • CInterpreter
  • DLinker
Mark scheme
  • B Compiler (1)
  • The only correct answer is B. The correct answer is compiler.
  • A is not correct because an assembler translates assembly language code into machine code, not a high-level program
  • C is not correct because an interpreter translates and executes the code line by line, without producing a complete machine code program first
  • D is not correct because a linker combines object code files into a single executable, it does not translate source code
Example answers and how they were marked
Full marks1/1

B Compiler

Why: Selected the compiler, the translator that translates the whole program into machine code before it is run (1).

No marks0/1

C Interpreter

Why: Near miss: an interpreter translates and executes the code line by line, so it does not translate the whole program into machine code before it is run.

No marks0/1

A Assembler

Why: Confuses the translators: an assembler translates assembly language code into machine code, it does not translate a high-level program as a whole.

2Short recall2 marksLow and High Level Languages Swap Remove

Device drivers allow hardware devices to work with a computer system.

Give two advantages of using a low-level programming language to write device drivers.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • It can control/manipulate the hardware (components/registers/memory locations) directly (1)
  • Each instruction maps to a single machine-code instruction, so the behaviour/timing can be controlled precisely (1)
  • The code can run very quickly / has a fast execution time (1)
  • The code uses less memory/RAM (1)
  • The code can be optimised for a particular processor/chipset (1)

Only award one mark where both 'controls the hardware' and 'accesses registers/memory locations' are given, as these are the same point.

Do not accept 'it is closer to the hardware' without saying that it controls or accesses the hardware directly.

Do not accept easier/faster to write/program/learn/understand/debug (these are advantages of high-level languages).

Do not accept faster/quicker without qualification.

Do not accept portable/machine independent.

Do not accept does not need to be translated/compiled (assembly language must be assembled).

Do not accept it is a low-level language / a repeat of the question.

Example answers and how they were marked
Full marks2/2

It can control the hardware directly and the code runs very quickly.

Why: Two creditworthy advantages: controls the hardware directly (1); fast execution (1).

Some marks1/2

It uses less memory than a high-level language.

Why: Creditworthy point: uses less memory/RAM (1). Only one advantage given.

No marks0/2

It is easier to understand and debug than a high-level language.

Why: These are advantages of high-level languages, not low-level ones; the mark scheme does not accept easier to understand or debug.

3Short recall2 marksLow and High Level Languages Swap Remove

Programs written in a high-level language are often machine independent.

Define the term machine independence.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • The (same) program/source code can run on different types/makes of computer/processor (1)
  • With few/no changes (to the program code) (1)
  • The same source code can be translated for each type of processor (1)
  • A different compiler/interpreter is used for each type of processor (1)
  • The program does not depend on one specific type of processor/hardware (1)
  • Only one version of the program needs to be written/kept (1)
  • The program is portable between different computers (1)

Allow 'different computers' as meaning different types of computer/processor.

Do not accept a program that will only run on one type of computer / the computer it was written on.

Do not accept written in machine code/binary, is translated into machine code, compiled/interpreted, is a low-level language.

Example answers and how they were marked
Full marks2/2

The same program can run on different types of computer (1) without being changed (1).

Why: Two creditworthy parts: runs on different types/makes of computer/processor (1); with few/no changes (1).

Some marks1/2

A program can run on different computers.

Why: Creditworthy point: can run on different types/makes of computer/processor (1), with 'different computers' allowed by the guidance. No second part about changes or translation.

No marks0/2

A program is written in machine code so the computer can understand it.

Why: Misconception: machine code is not machine independence; the mark scheme does not accept this, and no other creditworthy point is given.

4Short recall2 marksTranslators Swap Remove

An interpreter is a type of translator.

Define the term interpreter.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Translates/converts (high-level/source) code one line/statement at a time (1)
  • Translates/converts the code and executes/runs each line as it goes (1)
  • Executes/runs each line/statement immediately after it is translated (1)
  • Reports/stops with an error message as soon as a syntax error is found (1)

Allow 'runs' for executes, 'converts' for translates and 'instruction' for line/statement

Do not accept translates the whole program before it is run

Do not accept produces/creates object code, an executable file or machine code that is saved

Example answers and how they were marked
Full marks2/2

An interpreter is a program that translates high-level code line by line. Each line is run as soon as it has been translated, so any errors are shown straight away.

Why: Line-by-line translation (1) and each line executed immediately (1); the point about errors would be a third creditworthy point but the maximum is two.

Some marks1/2

An interpreter translates code one line at a time.

Why: Line-by-line translation (1); no point for immediate execution.

No marks0/2

An interpreter translates the whole program before it is run.

Why: Near-miss describing a compiler; the scheme's 'Do not accept' line rules out whole-program translation.

5Describe2 marksTranslators Swap Remove

A high-level program must be translated into machine code before it can be run.

Describe how a compiler and an interpreter differ in when the translated code is executed.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • The interpreter executes each line as soon as it has been translated (1) so translation and execution happen together/at the same time (1)
  • The compiler translates the whole program first (1) and the machine code is run later/separately (1)
  • The interpreter translates the code and runs it while the program is running (1) whereas the compiler does not run the code it produces (1)
  • The compiler produces translated code that is executed only after all the translation has finished (1) but the interpreter executes each line immediately (1)

Allow 'translates one line at a time' where it is linked to executing each line immediately.

Do not accept answers that only state that a compiler is faster/an interpreter is slower, without reference to when execution happens.

Do not accept answers that only give object code, error reporting or portability, without reference to when execution happens.

Do not accept the compiler executing the program as it translates it.

Example answers and how they were marked
Full marks2/2

The compiler translates the code first and the program is executed afterwards, but the interpreter executes each line as soon as it has been translated.

Why: Compiler translates the whole program first and it is executed afterwards (1) and interpreter executes each line as soon as it is translated (1).

Some marks1/2

The interpreter executes each line immediately after translating it.

Why: Correct interpreter timing (1); no comparison with when the compiler's translated code is executed.

No marks0/2

The compiler executes the program line by line as it translates it.

Why: Reverses the two translators; a compiler does not execute the program it translates, so no mark.

6Explain2 marksLow and High Level Languages Swap Remove

High-level languages are designed to be easier to learn than low-level languages.

Explain one reason why a high-level language is easier to learn than a low-level language.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Statements are written in English-like words/use maths symbols (1) so the programmer can understand more easily what each one does (1)
  • The language uses meaningful names for variables/structured constructs such as loops (1) so the code is easier to read/follow (1)
  • One statement translates into several machine code instructions (1) so there are fewer instructions to learn/understand for the same task (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'it is easier' / 'it is simpler' on its own, without saying what is easier/simpler.

Do not accept 'the computer understands it directly' / 'it does not need translating'.

Do not award answers about the program running faster or using less memory, as these are not about ease of learning.

Example answers and how they were marked
Full marks2/2

Statements are written in English-like words (1) so the programmer can understand more easily what each line does (1).

Why: Linked point (1) of English-like statements and reason (1) that these are easier to understand.

Some marks1/2

It uses meaningful names for variables (1) so it is easier.

Why: Point (1) that meaningful names for variables are used, but 'so it is easier' is not accepted as the linked reason.

No marks0/2

Because the computer can understand high-level code without translation.

Why: Misconception that high-level code is understood directly by the computer; no creditworthy characteristic of the language is given.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.