Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 514 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

9 questions · 24 marks

Pick again
Print
1Multiple choice1 markTranslators Swap Remove

Identify the type of translator that translates the whole program into machine code before it is run.

[1 mark]
  • AAssembler
  • BCompiler
  • CInterpreter
  • DLinker
Mark scheme
  • B Compiler (1)
  • The only correct answer is B. The correct answer is compiler.
  • A is not correct because an assembler translates assembly language code into machine code, not a high-level program
  • C is not correct because an interpreter translates and executes the code line by line, without producing a complete machine code program first
  • D is not correct because a linker combines object code files into a single executable, it does not translate source code
Example answers and how they were marked
Full marks1/1

B Compiler

Why: Selected the compiler, the translator that translates the whole program into machine code before it is run (1).

No marks0/1

C Interpreter

Why: Near miss: an interpreter translates and executes the code line by line, so it does not translate the whole program into machine code before it is run.

No marks0/1

A Assembler

Why: Confuses the translators: an assembler translates assembly language code into machine code, it does not translate a high-level program as a whole.

2Short recall2 marksLow and High Level Languages Swap Remove

Programs can be written in high-level or low-level programming languages.

Define the term high-level programming language.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Uses statements/instructions that look like English/maths (1)
  • Does not depend on one type of processor / can be run on different types of computer with few or no changes (machine independent) (1)
  • A single statement is translated into several machine code instructions (1)
  • Provides data structures such as arrays and records (1)
  • Provides built-in/library subprograms (1)
  • Is translated by a compiler or an interpreter (1)

Allow portable/platform independent for machine independent.

Allow easier to read/write/understand/debug only when linked to the English-like statements, e.g. uses words that look like English so it is easier to understand.

Do not accept a high-level language / not a low-level language with no other detail.

Do not accept written in binary/machine code.

Do not accept faster to run / uses less memory, as these are characteristics of low-level languages.

Example answers and how they were marked
Full marks2/2

A language that uses statements that look like English (1) and a program written in it can be run on different types of computer without being rewritten (1).

Why: English-like statements (1) and machine independent/portable (1).

Some marks1/2

A language that provides data structures such as arrays and records.

Why: Creditworthy point: provides data structures (1). No second part of the definition given.

No marks0/2

A language that is written in binary so the computer can understand it.

Why: Misconception: binary is machine code, not a high-level language; the mark scheme's do-not-accept line covers this.

3Short recall1 markLow and High Level Languages Swap Remove

A high-level language uses statements that look like English or maths.

State what a single statement in a high-level language is usually translated into.

[1 mark]
Mark scheme

Award one mark for:

  • Several/multiple machine code instructions (1)

The answer must refer to instructions.

Do not accept machine code on its own.

Do not accept binary on its own.

Do not accept 'one or more machine code instructions' as it does not show that one statement becomes several instructions.

Do not accept assembly code/compiled code/low-level code on their own.

Do not accept 'a line of code'/'a statement' as this repeats the question.

Example answers and how they were marked
Full marks1/1

Several machine code instructions

Why: Matches the creditworthy point that one high-level statement translates into several machine code instructions (1).

No marks0/1

Machine code

Why: Near-miss: gives the type of code but not that one statement becomes several instructions; mark scheme does not accept machine code on its own.

No marks0/1

Binary

Why: Misconception: high-level statements are translated into machine code instructions, not just binary; not accepted.

4Short recall2 marksLow and High Level Languages Swap Remove

Programs written in a high-level language are often machine independent.

Define the term machine independence.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • The (same) program/source code can run on different types/makes of computer/processor (1)
  • With few/no changes (to the program code) (1)
  • The same source code can be translated for each type of processor (1)
  • A different compiler/interpreter is used for each type of processor (1)
  • The program does not depend on one specific type of processor/hardware (1)
  • Only one version of the program needs to be written/kept (1)
  • The program is portable between different computers (1)

Allow 'different computers' as meaning different types of computer/processor.

Do not accept a program that will only run on one type of computer / the computer it was written on.

Do not accept written in machine code/binary, is translated into machine code, compiled/interpreted, is a low-level language.

Example answers and how they were marked
Full marks2/2

The same program can run on different types of computer (1) without being changed (1).

Why: Two creditworthy parts: runs on different types/makes of computer/processor (1); with few/no changes (1).

Some marks1/2

A program can run on different computers.

Why: Creditworthy point: can run on different types/makes of computer/processor (1), with 'different computers' allowed by the guidance. No second part about changes or translation.

No marks0/2

A program is written in machine code so the computer can understand it.

Why: Misconception: machine code is not machine independence; the mark scheme does not accept this, and no other creditworthy point is given.

5Short recall2 marksTranslators Swap Remove

An interpreter is a type of translator.

Define the term interpreter.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Translates/converts (high-level/source) code one line/statement at a time (1)
  • Translates/converts the code and executes/runs each line as it goes (1)
  • Executes/runs each line/statement immediately after it is translated (1)
  • Reports/stops with an error message as soon as a syntax error is found (1)

Allow 'runs' for executes, 'converts' for translates and 'instruction' for line/statement

Do not accept translates the whole program before it is run

Do not accept produces/creates object code, an executable file or machine code that is saved

Example answers and how they were marked
Full marks2/2

An interpreter is a program that translates high-level code line by line. Each line is run as soon as it has been translated, so any errors are shown straight away.

Why: Line-by-line translation (1) and each line executed immediately (1); the point about errors would be a third creditworthy point but the maximum is two.

Some marks1/2

An interpreter translates code one line at a time.

Why: Line-by-line translation (1); no point for immediate execution.

No marks0/2

An interpreter translates the whole program before it is run.

Why: Near-miss describing a compiler; the scheme's 'Do not accept' line rules out whole-program translation.

6Describe2 marksTranslators Swap Remove

A high-level program must be translated into machine code before it can be run.

Describe how a compiler and an interpreter differ in when the translated code is executed.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • The interpreter executes each line as soon as it has been translated (1) so translation and execution happen together/at the same time (1)
  • The compiler translates the whole program first (1) and the machine code is run later/separately (1)
  • The interpreter translates the code and runs it while the program is running (1) whereas the compiler does not run the code it produces (1)
  • The compiler produces translated code that is executed only after all the translation has finished (1) but the interpreter executes each line immediately (1)

Allow 'translates one line at a time' where it is linked to executing each line immediately.

Do not accept answers that only state that a compiler is faster/an interpreter is slower, without reference to when execution happens.

Do not accept answers that only give object code, error reporting or portability, without reference to when execution happens.

Do not accept the compiler executing the program as it translates it.

Example answers and how they were marked
Full marks2/2

The compiler translates the code first and the program is executed afterwards, but the interpreter executes each line as soon as it has been translated.

Why: Compiler translates the whole program first and it is executed afterwards (1) and interpreter executes each line as soon as it is translated (1).

Some marks1/2

The interpreter executes each line immediately after translating it.

Why: Correct interpreter timing (1); no comparison with when the compiler's translated code is executed.

No marks0/2

The compiler executes the program line by line as it translates it.

Why: Reverses the two translators; a compiler does not execute the program it translates, so no mark.

7Explain2 marksLow and High Level Languages Swap Remove

High-level languages are designed to be easier to learn than low-level languages.

Explain one reason why a high-level language is easier to learn than a low-level language.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Statements are written in English-like words/use maths symbols (1) so the programmer can understand more easily what each one does (1)
  • The language uses meaningful names for variables/structured constructs such as loops (1) so the code is easier to read/follow (1)
  • One statement translates into several machine code instructions (1) so there are fewer instructions to learn/understand for the same task (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'it is easier' / 'it is simpler' on its own, without saying what is easier/simpler.

Do not accept 'the computer understands it directly' / 'it does not need translating'.

Do not award answers about the program running faster or using less memory, as these are not about ease of learning.

Example answers and how they were marked
Full marks2/2

Statements are written in English-like words (1) so the programmer can understand more easily what each line does (1).

Why: Linked point (1) of English-like statements and reason (1) that these are easier to understand.

Some marks1/2

It uses meaningful names for variables (1) so it is easier.

Why: Point (1) that meaningful names for variables are used, but 'so it is easier' is not accepted as the linked reason.

No marks0/2

Because the computer can understand high-level code without translation.

Why: Misconception that high-level code is understood directly by the computer; no creditworthy characteristic of the language is given.

8Discuss6 marksLow and High Level Languages Swap Remove

A software company is writing a new program that will be sold to users who have different types of computer. The program does not need to control the hardware of the computer directly. The company must decide whether to write the program in a high-level language or a low-level language.

Discuss whether the company should use a high-level language or a low-level language to write this program.

Your answer should consider:

  • machine independence
  • processor specificity
  • how the code is translated for each type of computer.
[6 marks]
Mark scheme

Indicative content

Machine independence

  • A high-level language is machine independent, so the same source code can be run on different types of computer with few or no changes.
  • The company can write the program once and sell it to users with different computers, without rewriting the code for each type of computer.
  • Only one version of the program needs to be written and maintained, so development takes the company less time.

Processor specificity

  • A low-level language is processor-specific, so a program written for one processor will not run on a different processor without being rewritten.
  • Assembly language instructions depend on the instruction set of the particular processor, so the company would need a separate version of the program for each type of computer.
  • Writing a separate low-level version for every type of computer would take the company much longer than writing one high-level program.
  • Low-level code gives direct control of the hardware of one processor, so it is better suited to device drivers than to a program that must run on many different computers.

Translation

  • High-level source code is translated for each type of computer by a compiler or an interpreter, so one version of the source code is enough for all the users.
  • Assembly language is translated into machine code by an assembler, and the assembler produces machine code for one specific processor only.
  • Machine code is already in a form that one particular processor can execute directly, but the same machine code will not run on a different processor.
  • Each high-level statement translates into several machine code instructions, so the programmer does not need to know the instruction set of the processor.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

  • Level 3 responses must cover both high-level machine independence and low-level processor specificity, with the effect on the company's decision.
  • Do not award low-level language, assembly language or machine code as portable, or 'high-level languages are written in English/like English' as a reason for machine independence.
Example answers and how they were marked
Full marks6/6

A high-level language is machine independent, so the company can write the program once and it will run on different types of computer with few or no changes. A different compiler is used for each type of processor to translate that same source code into the machine code for that computer, so the company can sell one program to all of its users. A low-level language is processor-specific, so a program written in assembly for one processor will not run on a different one. The assembler produces machine code for one particular instruction set, so the company would need to write a separate version for each type of computer, which would take much longer. As the program does not need to control the hardware directly, the company should use a high-level language.

Why: Develops high-level machine independence with the compiler translating for each processor, and low-level processor specificity with the assembler producing machine code for one instruction set, both applied to the company's decision, in a coherent and sustained argument: Level 3, 6 marks.

Some marks3/6

A high-level language is machine independent, so the company can write the program once. A different compiler is used for each type of computer to translate the code, so users with different computers can all run the same program. A low-level language is processor-specific, so it would not be as suitable for the company.

Why: Machine independence is linked to the compiler and applied to the users, but processor specificity is only asserted and no translation of low-level code is given, so the reasoning is not sustained: Level 2, 3 marks.

Some marks1/6

High-level languages are machine independent because they are written in English, so the company can sell the program to anyone. Low-level languages are machine code, so they can be translated to run on any type of computer.

Why: One basic point that high-level languages are machine independent, applied by selling to anyone (1). 'Written in English' is not a reason for machine independence and low-level code is not portable, so neither is credited: Level 1, 1 mark.

9Discuss6 marksTranslators Swap Remove

A student is writing a program in a high-level language. The student runs the program after every small change to check that it works.

Discuss whether the student should use an interpreter or a compiler while writing and testing the program.

Your answer should include:

  • how each translator deals with a syntax error
  • how much of the program is translated at a time
  • how this affects the student's testing.
[6 marks]
Mark scheme

Indicative content

How each translator deals with a syntax error

  • An interpreter stops as soon as it finds a syntax error and displays an error message.
  • With an interpreter, the lines before the error have already been executed, so the student can see how far the program got before it stopped.
  • A compiler reports errors at the end of translation, so the student gets a list of all the syntax errors in the program in one go.

How much of the program is translated at a time

  • An interpreter translates one line at a time and executes each line immediately.
  • A compiler translates the whole program in one go before any of it is run.
  • A compiler produces object code, so after every change the whole program must be compiled again before the student can run it.
  • An interpreter produces no object code, so the student does not have to wait for the whole program to be translated before it runs.

How this affects the student's testing

  • An interpreter suits this student because the program can be run straight away after each small change.
  • The interpreter stops at the first error found, so the student fixes that error and runs the program again, but may only find the next error on the next run.
  • Reporting every error at the end of compilation means the student can fix several errors at once, but cannot run the program until the whole program compiles.
  • The student should use an interpreter while testing, and compile the finished program once it works.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Level 3 responses must relate the way each translator works to the student's testing, not just describe the two translators.

Do not accept answers about run-time or logic errors where no comparison of the translators is made.

Example answers and how they were marked
Full marks6/6

The student should use an interpreter while testing. An interpreter translates one line at a time and executes each line straight away, so as soon as the student has made a small change the program can be run without waiting for the whole program to be translated. If there is a syntax error, the interpreter stops at that line and displays an error message, and the lines before it have already been executed, so the student knows exactly where the problem is. A compiler translates the whole program in one go and only reports the errors at the end, so the student would get a list of all the syntax errors, but could not run any of the program until the whole program compiled successfully.

Why: Explains how each translator deals with a syntax error, how much is translated at a time (one line executed immediately against the whole program at once) and links both to the student's testing, with a conclusion. Level 3.

Some marks4/6

An interpreter translates one line at a time and stops when it finds an error, so the student can see where the error is. A compiler translates the whole program and reports all the errors at the end. The interpreter is better for testing because the student can run the program straight away after a change.

Why: Adequate: correct points about error reporting and one line at a time, with a recommendation, but the effect on testing is only asserted rather than reasoned through, so the linkage is not sustained. Level 2.

Some marks1/6

The student should use a compiler because it translates the program one line at a time and stops at the first error, which makes testing quicker.

Why: The roles of the two translators are reversed, so the answer only makes a basic point about testing more quickly. Level 1.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.