Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 659 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 12 marks

Pick again
Print
1Short recall2 marksLow and High Level Languages Swap Remove

Programs written in a high-level language are often machine independent.

Define the term machine independence.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • The (same) program/source code can run on different types/makes of computer/processor (1)
  • With few/no changes (to the program code) (1)
  • The same source code can be translated for each type of processor (1)
  • A different compiler/interpreter is used for each type of processor (1)
  • The program does not depend on one specific type of processor/hardware (1)
  • Only one version of the program needs to be written/kept (1)
  • The program is portable between different computers (1)

Allow 'different computers' as meaning different types of computer/processor.

Do not accept a program that will only run on one type of computer / the computer it was written on.

Do not accept written in machine code/binary, is translated into machine code, compiled/interpreted, is a low-level language.

Example answers and how they were marked
Full marks2/2

The same program can run on different types of computer without being changed.

Why: Two creditworthy parts: runs on different types/makes of computer/processor (1); with few/no changes (1).

Some marks1/2

A program can run on different computers.

Why: Creditworthy point: can run on different types/makes of computer/processor (1), with 'different computers' allowed by the guidance. No second part about changes or translation.

No marks0/2

A program is written in machine code so the computer can understand it.

Why: Misconception: machine code is not machine independence; the mark scheme does not accept this, and no other creditworthy point is given.

2Describe2 marksTranslators Swap Remove

Source code can contain syntax errors.

Describe how a compiler and an interpreter differ in the way they deal with syntax errors.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • The compiler reports all syntax errors after translation has finished (1) whereas the interpreter stops at the first error it finds (1)
  • The interpreter reports a syntax error as soon as it finds one (1) and does not translate/execute any more of the program (1)
  • The compiler continues translating after an error (1) and reports the errors at the end (1)
  • The interpreter stops translating when it reaches an error (1) but the compiler finishes translating before reporting errors (1)

Do not accept answers about fixing/correcting errors or about object code.

Do not award 'the compiler finds more errors' without saying errors are reported at the end.

Example answers and how they were marked
Full marks2/2

A compiler reports all the syntax errors at the end of translation, whereas an interpreter stops and reports the error as soon as it finds one.

Why: Compiler reports errors at the end (1) and interpreter stops/reports at the first error (1).

Some marks1/2

An interpreter stops translating when it finds a syntax error.

Why: Interpreter stops at the first error (1); no comparison with when the compiler reports errors.

No marks0/2

A compiler reports a syntax error immediately, before translating the rest of the program.

Why: Reverses the compiler's behaviour; it finishes translating before reporting errors.

3Explain2 marksLow and High Level Languages Swap Remove

Device drivers are programs that allow the operating system to communicate with hardware.

Explain one reason why a device driver is often written in a low-level language.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • The programmer can control/manipulate the hardware directly (1) because low-level instructions can access registers/memory addresses/hardware features (1)
  • The code can be made to work efficiently with a specific device (1) because low-level languages are processor/chipset specific, so the instructions match that hardware (1)
  • The code produced is fast to execute (1) because it is optimised for the specific processor/uses few instructions (1)
  • The code produced is small (1) so it fits in the limited memory/ROM available in the device (1)

For both marks, the expansion must follow/associate with the statement.

Fast execution and small code size are typical advantages of low-level languages; award them only where the linked reason relates to the device.

Do not accept 'it is easier to write/learn/understand' or 'it is faster to write' as a point or as the expansion, because low-level languages are not easier for these.

Do not accept 'it is close to the hardware' or 'it works with hardware' without expansion of what that allows the program to do.

Do not accept 'because it is low-level' as the expansion; the answer must say what the language/hardware allows.

Example answers and how they were marked
Full marks2/2

It can control the hardware directly because the instructions can read and write to the device's registers and memory addresses.

Why: Linked point (1) of direct hardware control and reason (1) that low-level instructions access registers and memory addresses.

Some marks1/2

It runs quickly because it is a low-level language.

Why: Point (1) of fast execution, but 'because it is a low-level language' is not accepted as the linked reason.

No marks0/2

Because it is easier to write programs for a particular device.

Why: Misconception that low-level languages are easier to write; no creditworthy point or linked reason about hardware control or efficiency.

4Discuss6 marksLow and High Level Languages Swap Remove

A software company is writing a new program that will be sold to users who have different types of computer. The program does not need to control the hardware of the computer directly. The company must decide whether to write the program in a high-level language or a low-level language.

Discuss whether the company should use a high-level language or a low-level language to write this program.

Your answer should consider:

  • machine independence
  • processor specificity
  • how the code is translated for each type of computer.
[6 marks]
Mark scheme

Indicative content

Machine independence

  • A high-level language is machine independent, so the same source code can be run on different types of computer with few or no changes.
  • The company can write the program once and sell it to users with different computers, without rewriting the code for each type of computer.
  • Only one version of the program needs to be written and maintained, so development takes the company less time.

Processor specificity

  • A low-level language is processor-specific, so a program written for one processor will not run on a different processor without being rewritten.
  • Assembly language instructions depend on the instruction set of the particular processor, so the company would need a separate version of the program for each type of computer.
  • Writing a separate low-level version for every type of computer would take the company much longer than writing one high-level program.
  • Low-level code gives direct control of the hardware of one processor, so it is better suited to device drivers than to a program that must run on many different computers.

Translation

  • High-level source code is translated for each type of computer by a compiler or an interpreter, so one version of the source code is enough for all the users.
  • Assembly language is translated into machine code by an assembler, and the assembler produces machine code for one specific processor only.
  • Machine code is already in a form that one particular processor can execute directly, but the same machine code will not run on a different processor.
  • Each high-level statement translates into several machine code instructions, so the programmer does not need to know the instruction set of the processor.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

  • Level 3 responses must cover both high-level machine independence and low-level processor specificity, with the effect on the company's decision.
  • Do not award low-level language, assembly language or machine code as portable, or 'high-level languages are written in English/like English' as a reason for machine independence.
Example answers and how they were marked
Full marks6/6

A high-level language is machine independent, so the company can write the program once and it will run on different types of computer with few or no changes. A different compiler is used for each type of processor to translate that same source code into the machine code for that computer, so the company can sell one program to all of its users. A low-level language is processor-specific, so a program written in assembly for one processor will not run on a different one. The assembler produces machine code for one particular instruction set, so the company would need to write a separate version for each type of computer, which would take much longer. As the program does not need to control the hardware directly, the company should use a high-level language.

Why: Develops high-level machine independence with the compiler translating for each processor, and low-level processor specificity with the assembler producing machine code for one instruction set, both applied to the company's decision, in a coherent and sustained argument: Level 3, 6 marks.

Some marks3/6

A high-level language is machine independent, so the company can write the program once. A different compiler is used for each type of computer to translate the code, so users with different computers can all run the same program. A low-level language is processor-specific, so it would not be as suitable for the company.

Why: Machine independence is linked to the compiler and applied to the users, but processor specificity is only asserted and no translation of low-level code is given, so the reasoning is not sustained: Level 2, 3 marks.

Some marks1/6

High-level languages are machine independent because they are written in English, so the company can sell the program to anyone. Low-level languages are machine code, so they can be translated to run on any type of computer.

Why: One basic point that high-level languages are machine independent, applied by selling to anyone (1). 'Written in English' is not a reason for machine independence and low-level code is not portable, so neither is credited: Level 1, 1 mark.

Questions by topic

5.3 Cybersecurity

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.