Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 7 marks

Pick again
Print
1Short recall2 marksLow and High Level Languages Swap Remove

Programs written in a high-level language are often machine independent.

Define the term machine independence.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • The (same) program/source code can run on different types/makes of computer/processor (1)
  • With few/no changes (to the program code) (1)
  • The same source code can be translated for each type of processor (1)
  • A different compiler/interpreter is used for each type of processor (1)
  • The program does not depend on one specific type of processor/hardware (1)
  • Only one version of the program needs to be written/kept (1)
  • The program is portable between different computers (1)

Allow 'different computers' as meaning different types of computer/processor.

Do not accept a program that will only run on one type of computer / the computer it was written on.

Do not accept written in machine code/binary, is translated into machine code, compiled/interpreted, is a low-level language.

Example answers and how they were marked
Full marks2/2

The same program can run on different types of computer without being changed.

Why: Two creditworthy parts: runs on different types/makes of computer/processor (1); with few/no changes (1).

Some marks1/2

A program can run on different computers.

Why: Creditworthy point: can run on different types/makes of computer/processor (1), with 'different computers' allowed by the guidance. No second part about changes or translation.

No marks0/2

A program is written in machine code so the computer can understand it.

Why: Misconception: machine code is not machine independence; the mark scheme does not accept this, and no other creditworthy point is given.

2Short recall1 markLow and High Level Languages Swap Remove

A high-level language uses statements that look like English or maths.

State what a single statement in a high-level language is usually translated into.

[1 mark]
Mark scheme

Award one mark for:

  • Several/multiple machine code instructions (1)

The answer must refer to instructions.

Do not accept machine code on its own.

Do not accept binary on its own.

Do not accept 'one or more machine code instructions' as it does not show that one statement becomes several instructions.

Do not accept assembly code/compiled code/low-level code on their own.

Do not accept 'a line of code'/'a statement' as this repeats the question.

Example answers and how they were marked
Full marks1/1

Several machine code instructions

Why: Matches the creditworthy point that one high-level statement translates into several machine code instructions (1).

No marks0/1

Machine code

Why: Near-miss: gives the type of code but not that one statement becomes several instructions; mark scheme does not accept machine code on its own.

No marks0/1

Binary

Why: Misconception: high-level statements are translated into machine code instructions, not just binary; not accepted.

3Describe2 marksLow and High Level Languages Swap Remove

A device driver is software that allows the operating system to control a piece of hardware. Device drivers are often written in a low-level programming language.

Describe one reason why a low-level programming language is suitable for writing a device driver.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Instructions can manipulate/control the hardware/memory/registers directly (1) so the driver can control the specific device it is written for (1)
  • The code is written for one specific processor/architecture (1) so it works with the exact hardware it will control (1)
  • The programmer controls exactly how memory/registers are used (1) so the code is efficient and needs little memory, which suits a device that has limited memory (1)
  • Each instruction maps to one machine code instruction (1) so the driver code is small enough to fit in the memory of the device (1)

Extra detail, such as naming the device the driver controls, is not needed to earn the marks.

Do not accept 'it is closer to machine code' on its own: it must be developed to show how this helps the driver, e.g. it can control the hardware directly.

Do not accept 'it is faster/quicker' with no link to the hardware/device, e.g. the device responds quickly.

Do not accept 'it is easier to learn', 'it is easier to debug' or 'it takes less time to write'.

Example answers and how they were marked
Full marks2/2

Low-level instructions can manipulate the hardware and memory directly so the driver can control the specific device it was written for, such as a sound card.

Why: Point about direct control of hardware/memory (1) linked to controlling the specific device (1). The named device is extra detail and is not needed.

Some marks1/2

Low-level instructions can manipulate the hardware directly.

Why: Correct point (1) but no linked development saying how this helps the device driver.

No marks0/2

It is closer to machine code so it runs faster than a high-level language.

Why: 'Closer to machine code' is not developed into how this helps the driver, and 'runs faster' is not linked to the hardware/device, so no mark.

4Explain2 marksTranslators Swap Remove

An interpreter translates a program one line at a time.

Explain why an interpreted program stops when it reaches a line that contains a syntax error.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • The interpreter translates and executes each line in turn (1) so it cannot continue past a line it cannot translate (1)
  • The interpreter finds the error when it reaches that line (1) so it stops and displays an error message before later lines are executed (1)
  • Each line is translated just before it is executed (1) so a syntax error in that line prevents that translation/execution from happening (1)
  • The interpreter does not translate the whole program first (1) so it only discovers the error when that line is reached during execution (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'the program crashes' without saying that the interpreter cannot translate/execute the line.

Do not accept answers about how a compiler reports errors.

Example answers and how they were marked
Full marks2/2

The interpreter translates each line just before it executes it, so when it reaches the line with the syntax error it cannot translate that line and stops.

Why: Line-by-line translation (1) linked to being unable to translate the faulty line, so stopping (1).

Some marks1/2

The interpreter translates one line at a time, so it stops at the error.

Why: Line-by-line translation (1); 'stops at the error' repeats the outcome and does not explain why it cannot continue.

No marks0/2

It stops because the compiler reports all errors at the end.

Why: Describes a compiler, not an interpreter; no credit.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 71
Data Protection Act 17 questions Impact of AI 18 questions Intellectual Property 18 questions Software Licences 18 questions

5.3 Cybersecurity

Build a paper on this topic 36
Malware 18 questions Social Engineering 18 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.