Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 514 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

6 questions · 11 marks

Pick again
Print
1Short recall2 marksLow and High Level Languages Swap Remove

Device drivers allow hardware devices to work with a computer system.

Give two advantages of using a low-level programming language to write device drivers.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • It can control/manipulate the hardware (components/registers/memory locations) directly (1)
  • Each instruction maps to a single machine-code instruction, so the behaviour/timing can be controlled precisely (1)
  • The code can run very quickly / has a fast execution time (1)
  • The code uses less memory/RAM (1)
  • The code can be optimised for a particular processor/chipset (1)

Only award one mark where both 'controls the hardware' and 'accesses registers/memory locations' are given, as these are the same point.

Do not accept 'it is closer to the hardware' without saying that it controls or accesses the hardware directly.

Do not accept easier/faster to write/program/learn/understand/debug (these are advantages of high-level languages).

Do not accept faster/quicker without qualification.

Do not accept portable/machine independent.

Do not accept does not need to be translated/compiled (assembly language must be assembled).

Do not accept it is a low-level language / a repeat of the question.

Example answers and how they were marked
Full marks2/2

It can control the hardware directly and the code runs very quickly.

Why: Two creditworthy advantages: controls the hardware directly (1); fast execution (1).

Some marks1/2

It uses less memory than a high-level language.

Why: Creditworthy point: uses less memory/RAM (1). Only one advantage given.

No marks0/2

It is easier to understand and debug than a high-level language.

Why: These are advantages of high-level languages, not low-level ones; the mark scheme does not accept easier to understand or debug.

2Short recall1 markLow and High Level Languages Swap Remove

A high-level language uses statements that look like English or maths.

State what a single statement in a high-level language is usually translated into.

[1 mark]
Mark scheme

Award one mark for:

  • Several/multiple machine code instructions (1)

The answer must refer to instructions.

Do not accept machine code on its own.

Do not accept binary on its own.

Do not accept 'one or more machine code instructions' as it does not show that one statement becomes several instructions.

Do not accept assembly code/compiled code/low-level code on their own.

Do not accept 'a line of code'/'a statement' as this repeats the question.

Example answers and how they were marked
Full marks1/1

Several machine code instructions

Why: Matches the creditworthy point that one high-level statement translates into several machine code instructions (1).

No marks0/1

Machine code

Why: Near-miss: gives the type of code but not that one statement becomes several instructions; mark scheme does not accept machine code on its own.

No marks0/1

Binary

Why: Misconception: high-level statements are translated into machine code instructions, not just binary; not accepted.

3Short recall2 marksTranslators Swap Remove

An interpreter is a type of translator.

Define the term interpreter.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Translates/converts (high-level/source) code one line/statement at a time (1)
  • Translates/converts the code and executes/runs each line as it goes (1)
  • Executes/runs each line/statement immediately after it is translated (1)
  • Reports/stops with an error message as soon as a syntax error is found (1)

Allow 'runs' for executes, 'converts' for translates and 'instruction' for line/statement

Do not accept translates the whole program before it is run

Do not accept produces/creates object code, an executable file or machine code that is saved

Example answers and how they were marked
Full marks2/2

An interpreter is a program that translates high-level code line by line. Each line is run as soon as it has been translated, so any errors are shown straight away.

Why: Line-by-line translation (1) and each line executed immediately (1); the point about errors would be a third creditworthy point but the maximum is two.

Some marks1/2

An interpreter translates code one line at a time.

Why: Line-by-line translation (1); no point for immediate execution.

No marks0/2

An interpreter translates the whole program before it is run.

Why: Near-miss describing a compiler; the scheme's 'Do not accept' line rules out whole-program translation.

4Describe2 marksTranslators Swap Remove

A compiler and an interpreter both translate source code.

Describe one difference between what a compiler produces and what an interpreter produces.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • A compiler produces object code/machine code/an executable (file) (1) whereas an interpreter produces no object code/translated file (1)
  • A compiler produces a machine code file (1) that can be run on its own/without the compiler/translator being present (1)
  • An interpreter produces no object code/file (1) because it translates and executes each line instead of saving translated code (1)
  • The compiler's output can be saved/stored (1) and run again later, while interpreted code has to be translated again each time it is run (1)

Allow binary for machine code.

Allow executable/an executable for object code.

Do not accept responses about translating the whole program, reporting errors or the speed of execution.

Do not accept 'the interpreter translates/executes one line at a time' on its own: this is how it translates, not what it produces. It earns the development only when linked to no object code/translated file being produced.

Do not accept the interpreter producing object code/an executable.

Example answers and how they were marked
Full marks2/2

A compiler produces object code, which is saved as a file, whereas an interpreter does not produce a file because it translates and executes each line.

Why: Compiler produces object code (1) contrasted with the interpreter producing no object code/translated file (1).

Some marks1/2

The compiler produces machine code.

Why: Machine code/object code produced (1); there is no contrast with the interpreter, so the development is not earned.

No marks0/2

The interpreter produces object code for each line it translates.

Why: Reverses the translators' outputs: the interpreter produces no object code, so nothing is creditworthy.

5Explain2 marksLow and High Level Languages Swap Remove

High-level languages are designed to be easier to learn than low-level languages.

Explain one reason why a high-level language is easier to learn than a low-level language.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Statements are written in English-like words/use maths symbols (1) so the programmer can understand more easily what each one does (1)
  • The language uses meaningful names for variables/structured constructs such as loops (1) so the code is easier to read/follow (1)
  • One statement translates into several machine code instructions (1) so there are fewer instructions to learn/understand for the same task (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'it is easier' / 'it is simpler' on its own, without saying what is easier/simpler.

Do not accept 'the computer understands it directly' / 'it does not need translating'.

Do not award answers about the program running faster or using less memory, as these are not about ease of learning.

Example answers and how they were marked
Full marks2/2

Statements are written in English-like words (1) so the programmer can understand more easily what each line does (1).

Why: Linked point (1) of English-like statements and reason (1) that these are easier to understand.

Some marks1/2

It uses meaningful names for variables (1) so it is easier.

Why: Point (1) that meaningful names for variables are used, but 'so it is easier' is not accepted as the linked reason.

No marks0/2

Because the computer can understand high-level code without translation.

Why: Misconception that high-level code is understood directly by the computer; no creditworthy characteristic of the language is given.

6Explain2 marksTranslators Swap Remove

A programmer writes a program in a high-level language. The program is translated by a compiler.

Explain why a compiler must translate the whole program before any of it can be executed.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • The compiler produces object code/machine code for the whole program (1) so there is no complete executable until every line has been translated (1)
  • The compiler translates all the source code before producing the object code (1) so the program cannot start until translation has finished (1)
  • The compiler checks the whole program for errors during translation (1) so all of the source code must be read before an executable can be produced (1)

For both marks, the expansion must follow/associate with the statement.

Allow 'in one go'/'all at once' for the translation point, but this does not earn the second mark unless it is linked to why the program cannot be executed until translation has finished.

A statement that the whole program is translated, with no linked reason about when the program can be executed, earns 1 mark only.

Do not accept 'a compiler is faster' or 'compiled code runs faster' on its own; this does not explain why translation must finish before execution.

Do not accept 'it translates and runs the program one line at a time', as this describes an interpreter.

Example answers and how they were marked
Full marks2/2

A compiler produces object code for the whole program, so there is no complete executable until every line has been translated.

Why: Object code for the whole program (1) linked to there being no complete executable until every line is translated (1).

Some marks1/2

A compiler translates the whole program in one go.

Why: Translation of the whole program only (1); no linked reason about when the program can be executed, so the second mark is not awarded.

No marks0/2

A compiler translates and runs the program one line at a time, so it stops when it finds an error.

Why: Confuses a compiler with an interpreter; nothing about translating the whole program before execution, so no creditworthy point.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.