Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 514 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 12 marks

Pick again
Print
1Short recall2 marksLow and High Level Languages Swap Remove

Programs can be written in high-level or low-level programming languages.

Define the term high-level programming language.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Uses statements/instructions that look like English/maths (1)
  • Does not depend on one type of processor / can be run on different types of computer with few or no changes (machine independent) (1)
  • A single statement is translated into several machine code instructions (1)
  • Provides data structures such as arrays and records (1)
  • Provides built-in/library subprograms (1)
  • Is translated by a compiler or an interpreter (1)

Allow portable/platform independent for machine independent.

Allow easier to read/write/understand/debug only when linked to the English-like statements, e.g. uses words that look like English so it is easier to understand.

Do not accept a high-level language / not a low-level language with no other detail.

Do not accept written in binary/machine code.

Do not accept faster to run / uses less memory, as these are characteristics of low-level languages.

Example answers and how they were marked
Full marks2/2

A language that uses statements that look like English (1) and a program written in it can be run on different types of computer without being rewritten (1).

Why: English-like statements (1) and machine independent/portable (1).

Some marks1/2

A language that provides data structures such as arrays and records.

Why: Creditworthy point: provides data structures (1). No second part of the definition given.

No marks0/2

A language that is written in binary so the computer can understand it.

Why: Misconception: binary is machine code, not a high-level language; the mark scheme's do-not-accept line covers this.

2Short recall2 marksLow and High Level Languages Swap Remove

Device drivers allow hardware devices to work with a computer system.

Give two advantages of using a low-level programming language to write device drivers.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • It can control/manipulate the hardware (components/registers/memory locations) directly (1)
  • Each instruction maps to a single machine-code instruction, so the behaviour/timing can be controlled precisely (1)
  • The code can run very quickly / has a fast execution time (1)
  • The code uses less memory/RAM (1)
  • The code can be optimised for a particular processor/chipset (1)

Only award one mark where both 'controls the hardware' and 'accesses registers/memory locations' are given, as these are the same point.

Do not accept 'it is closer to the hardware' without saying that it controls or accesses the hardware directly.

Do not accept easier/faster to write/program/learn/understand/debug (these are advantages of high-level languages).

Do not accept faster/quicker without qualification.

Do not accept portable/machine independent.

Do not accept does not need to be translated/compiled (assembly language must be assembled).

Do not accept it is a low-level language / a repeat of the question.

Example answers and how they were marked
Full marks2/2

It can control the hardware directly and the code runs very quickly.

Why: Two creditworthy advantages: controls the hardware directly (1); fast execution (1).

Some marks1/2

It uses less memory than a high-level language.

Why: Creditworthy point: uses less memory/RAM (1). Only one advantage given.

No marks0/2

It is easier to understand and debug than a high-level language.

Why: These are advantages of high-level languages, not low-level ones; the mark scheme does not accept easier to understand or debug.

3Short recall2 marksLow and High Level Languages Swap Remove

Programs written in a high-level language are often machine independent.

Define the term machine independence.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • The (same) program/source code can run on different types/makes of computer/processor (1)
  • With few/no changes (to the program code) (1)
  • The same source code can be translated for each type of processor (1)
  • A different compiler/interpreter is used for each type of processor (1)
  • The program does not depend on one specific type of processor/hardware (1)
  • Only one version of the program needs to be written/kept (1)
  • The program is portable between different computers (1)

Allow 'different computers' as meaning different types of computer/processor.

Do not accept a program that will only run on one type of computer / the computer it was written on.

Do not accept written in machine code/binary, is translated into machine code, compiled/interpreted, is a low-level language.

Example answers and how they were marked
Full marks2/2

The same program can run on different types of computer (1) without being changed (1).

Why: Two creditworthy parts: runs on different types/makes of computer/processor (1); with few/no changes (1).

Some marks1/2

A program can run on different computers.

Why: Creditworthy point: can run on different types/makes of computer/processor (1), with 'different computers' allowed by the guidance. No second part about changes or translation.

No marks0/2

A program is written in machine code so the computer can understand it.

Why: Misconception: machine code is not machine independence; the mark scheme does not accept this, and no other creditworthy point is given.

4Discuss6 marksTranslators Swap Remove

A student is writing a program in a high-level language. The student runs the program after every small change to check that it works.

Discuss whether the student should use an interpreter or a compiler while writing and testing the program.

Your answer should include:

  • how each translator deals with a syntax error
  • how much of the program is translated at a time
  • how this affects the student's testing.
[6 marks]
Mark scheme

Indicative content

How each translator deals with a syntax error

  • An interpreter stops as soon as it finds a syntax error and displays an error message.
  • With an interpreter, the lines before the error have already been executed, so the student can see how far the program got before it stopped.
  • A compiler reports errors at the end of translation, so the student gets a list of all the syntax errors in the program in one go.

How much of the program is translated at a time

  • An interpreter translates one line at a time and executes each line immediately.
  • A compiler translates the whole program in one go before any of it is run.
  • A compiler produces object code, so after every change the whole program must be compiled again before the student can run it.
  • An interpreter produces no object code, so the student does not have to wait for the whole program to be translated before it runs.

How this affects the student's testing

  • An interpreter suits this student because the program can be run straight away after each small change.
  • The interpreter stops at the first error found, so the student fixes that error and runs the program again, but may only find the next error on the next run.
  • Reporting every error at the end of compilation means the student can fix several errors at once, but cannot run the program until the whole program compiles.
  • The student should use an interpreter while testing, and compile the finished program once it works.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Level 3 responses must relate the way each translator works to the student's testing, not just describe the two translators.

Do not accept answers about run-time or logic errors where no comparison of the translators is made.

Example answers and how they were marked
Full marks6/6

The student should use an interpreter while testing. An interpreter translates one line at a time and executes each line straight away, so as soon as the student has made a small change the program can be run without waiting for the whole program to be translated. If there is a syntax error, the interpreter stops at that line and displays an error message, and the lines before it have already been executed, so the student knows exactly where the problem is. A compiler translates the whole program in one go and only reports the errors at the end, so the student would get a list of all the syntax errors, but could not run any of the program until the whole program compiled successfully.

Why: Explains how each translator deals with a syntax error, how much is translated at a time (one line executed immediately against the whole program at once) and links both to the student's testing, with a conclusion. Level 3.

Some marks4/6

An interpreter translates one line at a time and stops when it finds an error, so the student can see where the error is. A compiler translates the whole program and reports all the errors at the end. The interpreter is better for testing because the student can run the program straight away after a change.

Why: Adequate: correct points about error reporting and one line at a time, with a recommendation, but the effect on testing is only asserted rather than reasoned through, so the linkage is not sustained. Level 2.

Some marks1/6

The student should use a compiler because it translates the program one line at a time and stops at the first error, which makes testing quicker.

Why: The roles of the two translators are reversed, so the answer only makes a basic point about testing more quickly. Level 1.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.