Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 514 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

9 questions · 26 marks

Pick again
Print
1Short recall2 marksLow and High Level Languages Swap Remove

Programs can be written in high-level or low-level programming languages.

Define the term high-level programming language.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Uses statements/instructions that look like English/maths (1)
  • Does not depend on one type of processor / can be run on different types of computer with few or no changes (machine independent) (1)
  • A single statement is translated into several machine code instructions (1)
  • Provides data structures such as arrays and records (1)
  • Provides built-in/library subprograms (1)
  • Is translated by a compiler or an interpreter (1)

Allow portable/platform independent for machine independent.

Allow easier to read/write/understand/debug only when linked to the English-like statements, e.g. uses words that look like English so it is easier to understand.

Do not accept a high-level language / not a low-level language with no other detail.

Do not accept written in binary/machine code.

Do not accept faster to run / uses less memory, as these are characteristics of low-level languages.

Example answers and how they were marked
Full marks2/2

A language that uses statements that look like English (1) and a program written in it can be run on different types of computer without being rewritten (1).

Why: English-like statements (1) and machine independent/portable (1).

Some marks1/2

A language that provides data structures such as arrays and records.

Why: Creditworthy point: provides data structures (1). No second part of the definition given.

No marks0/2

A language that is written in binary so the computer can understand it.

Why: Misconception: binary is machine code, not a high-level language; the mark scheme's do-not-accept line covers this.

2Short recall2 marksLow and High Level Languages Swap Remove

Device drivers allow hardware devices to work with a computer system.

Give two advantages of using a low-level programming language to write device drivers.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • It can control/manipulate the hardware (components/registers/memory locations) directly (1)
  • Each instruction maps to a single machine-code instruction, so the behaviour/timing can be controlled precisely (1)
  • The code can run very quickly / has a fast execution time (1)
  • The code uses less memory/RAM (1)
  • The code can be optimised for a particular processor/chipset (1)

Only award one mark where both 'controls the hardware' and 'accesses registers/memory locations' are given, as these are the same point.

Do not accept 'it is closer to the hardware' without saying that it controls or accesses the hardware directly.

Do not accept easier/faster to write/program/learn/understand/debug (these are advantages of high-level languages).

Do not accept faster/quicker without qualification.

Do not accept portable/machine independent.

Do not accept does not need to be translated/compiled (assembly language must be assembled).

Do not accept it is a low-level language / a repeat of the question.

Example answers and how they were marked
Full marks2/2

It can control the hardware directly and the code runs very quickly.

Why: Two creditworthy advantages: controls the hardware directly (1); fast execution (1).

Some marks1/2

It uses less memory than a high-level language.

Why: Creditworthy point: uses less memory/RAM (1). Only one advantage given.

No marks0/2

It is easier to understand and debug than a high-level language.

Why: These are advantages of high-level languages, not low-level ones; the mark scheme does not accept easier to understand or debug.

3Short recall2 marksLow and High Level Languages Swap Remove

Programs written in a high-level language are often machine independent.

Define the term machine independence.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • The (same) program/source code can run on different types/makes of computer/processor (1)
  • With few/no changes (to the program code) (1)
  • The same source code can be translated for each type of processor (1)
  • A different compiler/interpreter is used for each type of processor (1)
  • The program does not depend on one specific type of processor/hardware (1)
  • Only one version of the program needs to be written/kept (1)
  • The program is portable between different computers (1)

Allow 'different computers' as meaning different types of computer/processor.

Do not accept a program that will only run on one type of computer / the computer it was written on.

Do not accept written in machine code/binary, is translated into machine code, compiled/interpreted, is a low-level language.

Example answers and how they were marked
Full marks2/2

The same program can run on different types of computer (1) without being changed (1).

Why: Two creditworthy parts: runs on different types/makes of computer/processor (1); with few/no changes (1).

Some marks1/2

A program can run on different computers.

Why: Creditworthy point: can run on different types/makes of computer/processor (1), with 'different computers' allowed by the guidance. No second part about changes or translation.

No marks0/2

A program is written in machine code so the computer can understand it.

Why: Misconception: machine code is not machine independence; the mark scheme does not accept this, and no other creditworthy point is given.

4Short recall2 marksTranslators Swap Remove

An interpreter is a type of translator.

Define the term interpreter.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Translates/converts (high-level/source) code one line/statement at a time (1)
  • Translates/converts the code and executes/runs each line as it goes (1)
  • Executes/runs each line/statement immediately after it is translated (1)
  • Reports/stops with an error message as soon as a syntax error is found (1)

Allow 'runs' for executes, 'converts' for translates and 'instruction' for line/statement

Do not accept translates the whole program before it is run

Do not accept produces/creates object code, an executable file or machine code that is saved

Example answers and how they were marked
Full marks2/2

An interpreter is a program that translates high-level code line by line. Each line is run as soon as it has been translated, so any errors are shown straight away.

Why: Line-by-line translation (1) and each line executed immediately (1); the point about errors would be a third creditworthy point but the maximum is two.

Some marks1/2

An interpreter translates code one line at a time.

Why: Line-by-line translation (1); no point for immediate execution.

No marks0/2

An interpreter translates the whole program before it is run.

Why: Near-miss describing a compiler; the scheme's 'Do not accept' line rules out whole-program translation.

5Describe2 marksTranslators Swap Remove

A compiler and an interpreter both translate source code.

Describe one difference between what a compiler produces and what an interpreter produces.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • A compiler produces object code/machine code/an executable (file) (1) whereas an interpreter produces no object code/translated file (1)
  • A compiler produces a machine code file (1) that can be run on its own/without the compiler/translator being present (1)
  • An interpreter produces no object code/file (1) because it translates and executes each line instead of saving translated code (1)
  • The compiler's output can be saved/stored (1) and run again later, while interpreted code has to be translated again each time it is run (1)

Allow binary for machine code.

Allow executable/an executable for object code.

Do not accept responses about translating the whole program, reporting errors or the speed of execution.

Do not accept 'the interpreter translates/executes one line at a time' on its own: this is how it translates, not what it produces. It earns the development only when linked to no object code/translated file being produced.

Do not accept the interpreter producing object code/an executable.

Example answers and how they were marked
Full marks2/2

A compiler produces object code, which is saved as a file, whereas an interpreter does not produce a file because it translates and executes each line.

Why: Compiler produces object code (1) contrasted with the interpreter producing no object code/translated file (1).

Some marks1/2

The compiler produces machine code.

Why: Machine code/object code produced (1); there is no contrast with the interpreter, so the development is not earned.

No marks0/2

The interpreter produces object code for each line it translates.

Why: Reverses the translators' outputs: the interpreter produces no object code, so nothing is creditworthy.

6Explain2 marksLow and High Level Languages Swap Remove

High-level languages are designed to be easier to learn than low-level languages.

Explain one reason why a high-level language is easier to learn than a low-level language.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Statements are written in English-like words/use maths symbols (1) so the programmer can understand more easily what each one does (1)
  • The language uses meaningful names for variables/structured constructs such as loops (1) so the code is easier to read/follow (1)
  • One statement translates into several machine code instructions (1) so there are fewer instructions to learn/understand for the same task (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'it is easier' / 'it is simpler' on its own, without saying what is easier/simpler.

Do not accept 'the computer understands it directly' / 'it does not need translating'.

Do not award answers about the program running faster or using less memory, as these are not about ease of learning.

Example answers and how they were marked
Full marks2/2

Statements are written in English-like words (1) so the programmer can understand more easily what each line does (1).

Why: Linked point (1) of English-like statements and reason (1) that these are easier to understand.

Some marks1/2

It uses meaningful names for variables (1) so it is easier.

Why: Point (1) that meaningful names for variables are used, but 'so it is easier' is not accepted as the linked reason.

No marks0/2

Because the computer can understand high-level code without translation.

Why: Misconception that high-level code is understood directly by the computer; no creditworthy characteristic of the language is given.

7Explain2 marksLow and High Level Languages Swap Remove

A programmer writes the same program in a low-level language and in a high-level language.

Explain one reason why the program written in the low-level language may run faster.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • The programmer can choose the most efficient instructions/registers to use (1) so the program completes its task in fewer steps (1)
  • The programmer can optimise the code for the processor (1) because low-level instructions give direct control of registers/memory (1)
  • Each low-level instruction maps to one machine code instruction (1) so fewer instructions are executed than for the equivalent high-level code (1)
  • The translated code is smaller (1) so fewer instructions are fetched from memory and executed (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'it is low-level' / 'it is closer to machine code' / 'low-level code is faster' on its own without a reason why it makes the program run faster.

Do not accept 'high-level code has to be translated' / 'high-level code is interpreted' on its own without saying why that makes the program slower.

Do not accept 'the code is smaller' on its own without saying that this means fewer instructions are fetched/executed.

Do not accept 'it is easier to write' or 'quicker to type' as a reason for faster execution.

Example answers and how they were marked
Full marks2/2

The programmer can choose the most efficient instructions and registers to use (1) so the program completes its task in fewer steps (1).

Why: Linked point (1) of choosing efficient instructions/registers and reason (1) that the task is completed in fewer steps, so it runs faster.

Some marks1/2

Each low-level instruction maps to one machine code instruction (1) so the program is shorter to type.

Why: Point (1) that one low-level instruction maps to one machine code instruction, but being shorter to type does not explain why the program runs faster, so no second mark.

No marks0/2

Because it is closer to machine code.

Why: 'Closer to machine code' alone gives no reason why that makes the program run faster, and the mark scheme does not accept it on its own.

8Discuss6 marksLow and High Level Languages Swap Remove

A software company is writing a new program that will be sold to users who have different types of computer. The program does not need to control the hardware of the computer directly. The company must decide whether to write the program in a high-level language or a low-level language.

Discuss whether the company should use a high-level language or a low-level language to write this program.

Your answer should consider:

  • machine independence
  • processor specificity
  • how the code is translated for each type of computer.
[6 marks]
Mark scheme

Indicative content

Machine independence

  • A high-level language is machine independent, so the same source code can be run on different types of computer with few or no changes.
  • The company can write the program once and sell it to users with different computers, without rewriting the code for each type of computer.
  • Only one version of the program needs to be written and maintained, so development takes the company less time.

Processor specificity

  • A low-level language is processor-specific, so a program written for one processor will not run on a different processor without being rewritten.
  • Assembly language instructions depend on the instruction set of the particular processor, so the company would need a separate version of the program for each type of computer.
  • Writing a separate low-level version for every type of computer would take the company much longer than writing one high-level program.
  • Low-level code gives direct control of the hardware of one processor, so it is better suited to device drivers than to a program that must run on many different computers.

Translation

  • High-level source code is translated for each type of computer by a compiler or an interpreter, so one version of the source code is enough for all the users.
  • Assembly language is translated into machine code by an assembler, and the assembler produces machine code for one specific processor only.
  • Machine code is already in a form that one particular processor can execute directly, but the same machine code will not run on a different processor.
  • Each high-level statement translates into several machine code instructions, so the programmer does not need to know the instruction set of the processor.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

  • Level 3 responses must cover both high-level machine independence and low-level processor specificity, with the effect on the company's decision.
  • Do not award low-level language, assembly language or machine code as portable, or 'high-level languages are written in English/like English' as a reason for machine independence.
Example answers and how they were marked
Full marks6/6

A high-level language is machine independent, so the company can write the program once and it will run on different types of computer with few or no changes. A different compiler is used for each type of processor to translate that same source code into the machine code for that computer, so the company can sell one program to all of its users. A low-level language is processor-specific, so a program written in assembly for one processor will not run on a different one. The assembler produces machine code for one particular instruction set, so the company would need to write a separate version for each type of computer, which would take much longer. As the program does not need to control the hardware directly, the company should use a high-level language.

Why: Develops high-level machine independence with the compiler translating for each processor, and low-level processor specificity with the assembler producing machine code for one instruction set, both applied to the company's decision, in a coherent and sustained argument: Level 3, 6 marks.

Some marks3/6

A high-level language is machine independent, so the company can write the program once. A different compiler is used for each type of computer to translate the code, so users with different computers can all run the same program. A low-level language is processor-specific, so it would not be as suitable for the company.

Why: Machine independence is linked to the compiler and applied to the users, but processor specificity is only asserted and no translation of low-level code is given, so the reasoning is not sustained: Level 2, 3 marks.

Some marks1/6

High-level languages are machine independent because they are written in English, so the company can sell the program to anyone. Low-level languages are machine code, so they can be translated to run on any type of computer.

Why: One basic point that high-level languages are machine independent, applied by selling to anyone (1). 'Written in English' is not a reason for machine independence and low-level code is not portable, so neither is credited: Level 1, 1 mark.

9Discuss6 marksLow and High Level Languages Swap Remove

A company is developing the firmware for a robotic vacuum cleaner. The firmware must read the distance sensors and control the motors. The vacuum cleaner has a small amount of memory.

Discuss the characteristics of a low-level programming language that make it suitable for writing the firmware.

Your answer should include:

  • control of the hardware
  • the efficiency of the code
  • the link between the language and the processor.
[6 marks]
Mark scheme

Indicative content

Control of the hardware

  • Low-level languages can read and write the contents of registers and memory addresses directly, so the firmware can take the values from the distance sensors without calling a library routine.
  • Assembly language instructions can read from and write to specific input/output ports on the vacuum cleaner's processor, so the motors can be switched on and off directly.
  • The programmer decides exactly which processor operations are carried out and in which order, which matters when the vacuum must reverse away from a step or an obstacle.
  • A low-level language puts nothing between the program and the hardware, so the programmer can control the hardware of the vacuum cleaner precisely.

Efficiency of the code

  • Assembly language code can be hand-optimised instruction by instruction, so the code that checks a sensor is as short as possible.
  • The programmer can choose which registers hold values that are used again and again, which cuts down the number of memory accesses the firmware needs.
  • A hand-written low-level program can be made compact, so it is more likely to fit in the small amount of memory the vacuum cleaner has.
  • Because each instruction does one defined job, the time taken to react to a sensor reading is predictable, which suits firmware that must not overrun.

Link between the language and the processor

  • Low-level languages are processor-specific, so the instructions used are those of the exact processor in the vacuum cleaner rather than general statements that need translating.
  • Each assembly language instruction maps to one machine code instruction, so the programmer knows precisely which processor operation will be carried out by each line of code.
  • An assembler turns each mnemonic into its machine code equivalent, so the machine code running on the vacuum cleaner's processor is exactly what the programmer wrote.
  • Code written for a different processor would have to be rewritten, which is acceptable here because the vacuum cleaner always uses the same processor.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Within Level 1, award 1 mark for a single basic point and 2 marks for two or more independent basic points; Level 2 requires the points to be linked to the vacuum cleaner; Level 3 requires both control of the hardware and efficiency of the code, and a few concise, linked sentences can reach Level 3, so extra length is not required.

Accept registers, memory addresses, input/output ports, machine code and mnemonics as ways of describing access to the hardware, and accept 'a low-level language is faster' as a basic point on its own. Do not award 'binary is a low-level language' (machine code is written in binary, but binary is not a language), or characteristics of high-level languages such as being easy to read or portable, as characteristics of a low-level language.

Example answers and how they were marked
Full marks6/6

A low-level language can read and write to registers and to input/output ports directly, so the firmware can take the distance sensor readings and switch the motors without needing library routines. It can be hand-optimised instruction by instruction, so the code that checks a sensor is short and the time it takes is predictable, and a compact program is more likely to fit in the vacuum cleaner's small memory. The language is processor-specific and each assembly instruction maps to one machine code instruction, so the programmer knows exactly which operation the vacuum's processor will carry out, and the assembled machine code is exactly what they wrote.

Why: Covers all three bullets: direct control of registers and ports applied to the sensors and motors, hand-optimised compact code with predictable timing applied to the small memory, and the one-to-one link to the processor's own instruction set. Linked and applied throughout, so Level 3.

Some marks2/6

A low-level language can control the hardware directly. It can read the sensors and control the motors. It is also faster than a high-level language, so the vacuum responds quickly. This is useful because it has little memory.

Why: Three basic, independent points: direct control of the hardware applied to the sensors and motors, faster execution, and suitability for limited memory. They are asserted without development (no registers, ports or predictable timing) and the link between the language and the processor is missing, so Level 1, two or more basic points (2).

Some marks1/6

A low-level language is written in binary, so the computer can understand it directly. It is faster than a high-level language.

Why: 'Faster than a high-level language' is a creditworthy basic point (1). 'Written in binary' is not awarded, as binary itself is not a language and the do-not-award rule applies. Only one undeveloped point with no application to the vacuum cleaner, so Level 1, single basic point (1).

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.