Edexcel GCSE Computer Science (1CP2) exam questions

Build a practice paper from 604 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Practice paper

4 questions · 16 marks

Pick again

1Describe2 marksUtility Software Swap Remove

A student has a large number of photographs stored on a computer.

Describe the purpose of data compression software.

[2 marks]

Mark scheme

Award up to two marks for a linked description such as:

Makes a file/files smaller (1) so less storage space is needed on the disk (1)
Reduces the size of the data (1) so it takes less time to upload/download/transfer the file (1)
Compresses files/folders into a single file (1) so an attachment is under the size limit for email (1)
Reduces the size of the files (1) so more of them fit onto a storage device/backup media (1)

Do not accept 'it compresses the files' on its own, as this repeats the question.

Do not accept responses about protecting files from malware/viruses or about deleting files.

Example answers and how they were marked

Full marks2/2

It makes the files smaller (1) so that they use less storage space on the computer and more of them fit on the disk (1).

Why: The point (1) and a linked development giving the benefit (1).

Some marks1/2

It makes files smaller.

Why: This is the point (1) but there is no development of what the smaller size leads to, so only one mark.

No marks0/2

It protects the files from viruses so that they cannot be damaged.

Why: This describes anti-malware software, which the mark scheme does not accept; no creditworthy point is made.

2Describe2 marksTranslators Swap Remove

Source code can contain syntax errors.

Describe how a compiler and an interpreter differ in the way they deal with syntax errors.

[2 marks]

Mark scheme

Award up to two marks for a linked description such as:

The compiler reports all syntax errors after translation has finished (1) whereas the interpreter stops at the first error it finds (1)
The interpreter reports a syntax error as soon as it finds one (1) and does not translate/execute any more of the program (1)
The compiler continues translating after an error (1) and reports the errors at the end (1)
The interpreter stops translating when it reaches an error (1) but the compiler finishes translating before reporting errors (1)

Do not accept answers about fixing/correcting errors or about object code.

Do not award 'the compiler finds more errors' without saying errors are reported at the end.

Example answers and how they were marked

Full marks2/2

A compiler reports all the syntax errors at the end of translation, whereas an interpreter stops and reports the error as soon as it finds one.

Why: Compiler reports errors at the end (1) and interpreter stops/reports at the first error (1).

Some marks1/2

An interpreter stops translating when it finds a syntax error.

Why: Interpreter stops at the first error (1); no comparison with when the compiler reports errors.

No marks0/2

A compiler reports a syntax error immediately, before translating the rest of the program.

Why: Reverses the compiler's behaviour; it finishes translating before reporting errors.

3Discuss6 marksFile Management Swap Remove

A student keeps school work and photographs on a laptop. The laptop's storage is almost full. The student uses the operating system's file management.

Discuss the file management tasks the operating system provides that the student can use to manage these files.

Your answer should include:

saving files
deleting files
copying files

[6 marks]

Mark scheme

Indicative content

Saving files

When saving, the operating system lets the student choose the folder and the file name, so new work goes into the correct subject folder instead of the root.
The operating system warns the student before a file with the same name is overwritten, so an earlier version of an essay is not lost by accident.
The operating system writes the file into free space on the laptop and records where it is, so the student can open it again later.

Deleting files

The operating system lets the student delete files that are no longer needed, which frees space so new photographs can be saved.
Deleted files are usually moved to the recycle bin first, so a file removed by mistake can be restored.
Emptying the recycle bin removes the data permanently and releases the space for other files.

Copying files

The operating system lets the student copy files to a USB flash drive, so there is a second copy if the laptop is lost or damaged.
Copying leaves the original file in place, so the student can carry on working on the laptop's copy.
A whole folder can be copied in one action, including its subfolders, which is quicker than copying each file separately.

Levels

Level 0 (0 marks): No rewardable content.
Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Level 3 responses must cover saving, deleting and copying.

Do not accept answers about the processor or defragmentation as file management tasks.

Example answers and how they were marked

Full marks6/6

When the student saves a file, the operating system lets them pick the folder and name, and it warns before a file with the same name is overwritten, so an earlier essay is not lost. Because the laptop is nearly full, the student can delete photographs they no longer need; these go to the recycle bin at first, so a file removed by mistake can be restored, and emptying the bin releases the space for good. The student can also copy their school work to a USB flash drive, which leaves the original on the laptop and gives a backup if the laptop is damaged.

Why: Saving (choice of folder and name, overwrite warning), deleting (recycle bin, restoring, releasing space) and copying (backup on a USB drive, original kept) are all explained and tied to the student's full laptop.

Some marks3/6

The student can save files into folders so they know where they are. They can delete files they do not need to free up space. They can copy files onto a memory stick.

Why: Three tasks are named with a reason for deleting, but saving and copying are not developed and there is little linkage between the points, so Level 2.

No marks0/6

The operating system saves files automatically and deletes old files when the RAM is full. The processor copies the files to the hard disk.

Why: No creditworthy point: files are not saved automatically, RAM filling does not trigger file deletion, and copying is not done by the processor. Typical confusion between file management and memory or processor management.

4Discuss6 marksTranslators Swap Remove

A student is writing a program in a high-level language. The student runs the program after every small change to check that it works.

Discuss whether the student should use an interpreter or a compiler while writing and testing the program.

Your answer should include:

how each translator deals with a syntax error
how much of the program is translated at a time
how this affects the student's testing.

[6 marks]

Mark scheme

Indicative content

How each translator deals with a syntax error

An interpreter stops as soon as it finds a syntax error and displays an error message.
With an interpreter, the lines before the error have already been executed, so the student can see how far the program got before it stopped.
A compiler reports errors at the end of translation, so the student gets a list of all the syntax errors in the program in one go.

How much of the program is translated at a time

An interpreter translates one line at a time and executes each line immediately.
A compiler translates the whole program in one go before any of it is run.
A compiler produces object code, so after every change the whole program must be compiled again before the student can run it.
An interpreter produces no object code, so the student does not have to wait for the whole program to be translated before it runs.

How this affects the student's testing

An interpreter suits this student because the program can be run straight away after each small change.
The interpreter stops at the first error found, so the student fixes that error and runs the program again, but may only find the next error on the next run.
Reporting every error at the end of compilation means the student can fix several errors at once, but cannot run the program until the whole program compiles.
The student should use an interpreter while testing, and compile the finished program once it works.

Levels

Level 0 (0 marks): No rewardable content.
Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Level 3 responses must relate the way each translator works to the student's testing, not just describe the two translators.

Do not accept answers about run-time or logic errors where no comparison of the translators is made.

Example answers and how they were marked

Full marks6/6

The student should use an interpreter while testing. An interpreter translates one line at a time and executes each line straight away, so as soon as the student has made a small change the program can be run without waiting for the whole program to be translated. If there is a syntax error, the interpreter stops at that line and displays an error message, and the lines before it have already been executed, so the student knows exactly where the problem is. A compiler translates the whole program in one go and only reports the errors at the end, so the student would get a list of all the syntax errors, but could not run any of the program until the whole program compiled successfully.

Why: Explains how each translator deals with a syntax error, how much is translated at a time (one line executed immediately against the whole program at once) and links both to the student's testing, with a conclusion. Level 3.

Some marks4/6

An interpreter translates one line at a time and stops when it finds an error, so the student can see where the error is. A compiler translates the whole program and reports all the errors at the end. The interpreter is better for testing because the student can run the program straight away after a change.

Why: Adequate: correct points about error reporting and one line at a time, with a recommendation, but the effect on testing is only asserted rather than reasoned through, so the linkage is not sustained. Level 2.

Some marks1/6

The student should use a compiler because it translates the program one line at a time and stops at the first error, which makes testing quicker.

Why: The roles of the two translators are reversed, so the answer only makes a basic point about testing more quickly. Level 1.

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a paper

Practice paper

Questions by topic

2.1 Binary

2.2 Data representation

2.3 Data storage and compression

3.1 Hardware

3.2 Software

3.3 Programming languages

4.1 Networks

4.2 Network security

5.1 Environmental

5.2 Ethical and legal

More ways to revise Edexcel GCSE Computer Science (1CP2)