Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 631 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

6 questions · 16 marks

Pick again
Print
1Short recall2 marksUtility Software Swap Remove

Anti-malware software helps keep a computer secure.

State two functions of anti-malware software.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Scans files/downloads/the computer/system for malware (1)
  • Compares files/code against a database of known malware/signatures/definitions (1)
  • Quarantines/removes/deletes infected/suspicious files/malware (1)
  • Prevents/blocks malware from running/being installed (1)
  • Updates the database of malware definitions/signatures (1)

Allow removes/deletes malware for the quarantines/removes bullet.

Do not award both quarantining and removing infected files as two separate functions; they are one function.

Do not award both scanning and preventing/blocking malware if the answer describes real-time scanning that blocks malware; award one only.

Do not accept protects the computer on its own.

Do not accept defragments the disk or backs up files.

Example answers and how they were marked
Full marks2/2

It scans files for malware and quarantines any infected files.

Why: Scans files for malware (1) and quarantines infected files (1).

Some marks1/2

It scans the computer for viruses.

Why: Scanning the computer for malware/viruses (1); no second function.

No marks0/2

It defragments the hard disk so files open more quickly.

Why: Defragmentation is a different utility and does not scan for, quarantine or remove malware; no mark.

2Short recall2 marksPurpose & Function of Operating Systems Swap Remove

A computer can run more than one process at a time.

Give two tasks carried out by the process management function of an operating system.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Deciding which process runs next on the CPU/scheduling processes (1)
  • Allocating processor/CPU time to processes/allowing multitasking (1)
  • Managing the process life-cycle/process states (ready, running, blocked) (1)
  • Handling interrupts so a running process is suspended and another can run (1)
  • Stopping/terminating a process when it has finished (1)

Do not accept 'managing processes' on its own.

Do not accept 'handling interrupts' on its own.

Do not award two marks for the same task expressed twice, e.g. 'deciding which process runs next' and 'scheduling processes', or 'allocating CPU time' and 'giving each process a share of processor time'.

Do not accept 'managing memory/memory management', 'managing files/file management' or 'managing devices/peripherals' (these are other functions of an operating system).

Example answers and how they were marked
Full marks2/2

Deciding which process runs next on the CPU and stopping a process when it has finished.

Why: Scheduling a process (1) and terminating a process (1) are two different named tasks.

Some marks1/2

Deciding which process runs next and scheduling processes.

Why: Both points are the same task expressed twice, so only one mark is awarded under the guidance.

No marks0/2

Managing processes and managing files.

Why: 'Managing processes' repeats the question and earns nothing; 'managing files' is file management, not process management, so it is not credited.

3Short recall2 marksPurpose & Function of Operating Systems Swap Remove

A home computer can have more than one user account.

Name two tasks carried out by the user management function of an operating system.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Creating/deleting user accounts (1)
  • Storing usernames and passwords (1)
  • Checking login details/authenticating a user at login (1)
  • Setting access rights/permissions for each user, e.g. restricting which files/folders/programs/drives they can access (1)

Allow logging in as an example of checking login details.

Do not accept managing users on its own.

Do not accept provides a user interface, as this is not user management.

Do not accept managing files or managing processes, as these are other functions.

Do not accept stopping hackers/protecting from malware, as this is security, not user management.

Example answers and how they were marked
Full marks2/2

It stores usernames and passwords and sets access rights for each user.

Why: Storing usernames and passwords (1) and setting access rights (1) are two different user management tasks.

Some marks1/2

It checks the password at login and manages users.

Why: Checking a password at login earns (1); managing users repeats the question and earns nothing.

No marks0/2

It manages users and stops hackers accessing the computer.

Why: Managing users repeats the question; stopping hackers is security, not user management.

4Short recall2 marksUser Management Swap Remove

A user must log in before using a computer.

State two methods, other than a password, that an operating system can use to authenticate a user.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Fingerprint scan (1)
  • Face recognition (1)
  • Iris/retina scan (1)
  • Voice recognition (1)
  • Palm print/vein scan (1)
  • Smart card (1)
  • Security token (1)
  • Authenticator app (1)

Allow one-time passcode (OTP) for authenticator app.

Do not accept password (given in the question).

Do not accept username/user ID (it identifies the user but does not authenticate them).

Do not accept 'two-factor authentication' on its own (it is a combination of methods, not a method itself).

Do not accept 'encryption'.

Example answers and how they were marked
Full marks2/2

Fingerprint scan and a smart card.

Why: Fingerprint scan (1) and smart card (1) are two accepted methods.

Some marks1/2

Fingerprint scan and a username.

Why: Fingerprint scan (1); username is not accepted because it does not authenticate the user.

No marks0/2

A username and two-factor authentication.

Why: Username is not accepted because it does not authenticate the user, and two-factor authentication alone is not accepted because it is a combination of methods.

5Explain2 marksPeripheral Management Swap Remove

A new printer is connected to a computer.

Explain the purpose of a device driver.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • It allows the operating system/OS to communicate with the device/printer (1) because it translates the commands into signals the device understands (1)
  • It contains/sends the instructions/commands needed by a particular device (1) so the device carries out the correct actions (1)
  • It controls the device/printer (1) by sending commands/signals to it (1)
  • Different devices need different commands (1) so each one needs its own driver to work with the operating system (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'it drives/controls the device' on its own without saying how, e.g. by sending commands/signals.

Do not accept hardware/a physical device (a device driver is software).

Do not accept 'it connects the printer to the computer' or 'it installs the printer' without saying that it provides the instructions/commands for the device.

Example answers and how they were marked
Full marks2/2

It allows the operating system to send commands to the printer because it translates them into signals that the printer understands.

Why: Linked point (1) and reason (1).

Some marks1/2

It contains the instructions that the printer needs.

Why: Point (1) but no linked reason.

No marks0/2

It is a piece of hardware that connects the printer to the computer.

Why: Misconception: a device driver is software, not hardware, and saying it connects the printer is not accepted without saying it provides the instructions/commands.

6Discuss6 marksUser Management Swap Remove

A small design company has 18 employees who use a network with a shared file server. Some employees are company directors and need to manage the system. Designers need to work on shared project folders, but salary files must be kept private.

Discuss how the operating system's user management can give employees the access they need while protecting the company's files.

Your answer should include:

  • administrator accounts
  • standard user accounts
  • file permissions.
[6 marks]
Mark scheme

Indicative content

Administrator accounts

  • An administrator account can create new user accounts for new employees and delete accounts when employees leave.
  • The administrator can reset a forgotten password, so an employee can get back to work without sharing another person's account.
  • The administrator can set the access rights for each user or group, so designers get access to project folders and only directors can open salary files.
  • Administrator privileges should be given to only a few trusted employees, as administrators can change any settings on the system.

Standard user accounts

  • Designers should use standard user accounts, so they cannot install unauthorised software or change system settings.
  • A standard user can be given permission to read and write files in the project folder that their team uses.
  • Standard users should not be able to change other users' permissions, so the access rules cannot be removed by accident.
  • If a standard user tries to open a file without permission, the operating system denies access.

File permissions

  • Each file or folder can have permissions that allow a user to read, write or delete it.
  • Project folders can be set so all designers can read and write the files inside them.
  • Salary files can be set so only directors can read them, and other users are denied access.
  • Permissions can be set for a group of users, such as all designers, which is quicker than setting them for each person.
  • A file can be made read-only for standard users, so they can view it but cannot change it.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Level 3 responses must cover administrator accounts, standard user accounts and file permissions, and apply them to the design company.

Do not accept general operating system functions such as managing the processor or memory unless they are explicitly linked to controlling what a user can access.

Example answers and how they were marked
Full marks6/6

The directors should have administrator accounts so they can create accounts for new designers, delete accounts when staff leave, and set permissions on the file server. Ordinary designers should have standard user accounts so they cannot install software or change permissions. The administrator can give the designers read and write permission on the shared project folders, but only the directors can read the salary files. This means the designers can work together on projects, while confidential salary information stays private. If a designer leaves, the administrator can disable their account so they can no longer open company files.

Why: Level 3. It covers administrator accounts, standard accounts and file permissions, with coherent application to project folders and salary files.

Some marks4/6

The administrator can add and delete users and set their permissions. Normal users can only access the files they are allowed to. The salary files can be made private so only the administrator can see them.

Why: Level 2. Administrator accounts and file permissions are described with some application, but standard user accounts are not developed and the explanation lacks sustained reasoning.

No marks0/6

The administrator is the person who uses the computer most often, so the operating system gives them more memory and a faster processor. This means they can manage the users.

Why: Level 0. It confuses administrator privileges with extra memory and processor speed, which is process management, not user management.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.