Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 631 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

5 questions · 9 marks

Pick again
Print
1Short recall1 markUtility Software Swap Remove

Backup software is a type of utility software.

State one purpose of backup software.

[1 mark]
Mark scheme

Award one mark for any of the following:

  • To make/keep a copy of files/data (1)
  • To store the copy separately from the original, e.g. on a different device/in a different location (1)
  • So that data can be restored if the original is lost/damaged/corrupted (1)

Do not accept "to save files" on its own, as saving is normal file management and does not make a separate copy.

Do not accept answers that describe a different utility, such as scanning for malware/viruses (anti-malware software).

Example answers and how they were marked
Full marks1/1

To make a copy of data so it can be restored if the original is lost.

Why: Copy of data (1); the restore point is also present but the maximum is one mark.

No marks0/1

To save files to a hard disk.

Why: Saving files is normal file management and does not make a separate copy; the mark scheme says not to accept this, so no mark.

No marks0/1

To scan files for viruses.

Why: Describes anti-malware software, a different utility; the mark scheme says not to accept answers about another utility, so no mark.

2Short recall2 marksUser Management Swap Remove

A user must log in before using a computer.

State two methods, other than a password, that an operating system can use to authenticate a user.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Fingerprint scan (1)
  • Face recognition (1)
  • Iris/retina scan (1)
  • Voice recognition (1)
  • Palm print/vein scan (1)
  • Smart card (1)
  • Security token (1)
  • Authenticator app (1)

Allow one-time passcode (OTP) for authenticator app.

Do not accept password (given in the question).

Do not accept username/user ID (it identifies the user but does not authenticate them).

Do not accept 'two-factor authentication' on its own (it is a combination of methods, not a method itself).

Do not accept 'encryption'.

Example answers and how they were marked
Full marks2/2

Fingerprint scan and a smart card.

Why: Fingerprint scan (1) and smart card (1) are two accepted methods.

Some marks1/2

Fingerprint scan and a username.

Why: Fingerprint scan (1); username is not accepted because it does not authenticate the user.

No marks0/2

A username and two-factor authentication.

Why: Username is not accepted because it does not authenticate the user, and two-factor authentication alone is not accepted because it is a combination of methods.

3Describe2 marksMemory Management Swap Remove

A user closes a program that is running on a computer.

Describe how the operating system manages the main memory that the program was using.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • The memory (that was) used by the program is freed/released/marked as free (1) so it can be allocated/reused by another program/process (1)
  • The operating system's memory allocation table/record (of memory in use) is updated (1) to show that the program's memory locations/blocks are now free/available (1)
  • The program's instructions/data are removed/overwritten in main memory (1) so the space they used is no longer reserved for that program (1)
  • The memory pages/blocks allocated to the program are returned to the list of free pages/blocks (1) that can be used when the next program is loaded (1)

For both marks, the expansion must follow/associate with the statement.

Do not award two marks for the same idea described twice (e.g. the memory is freed and added to a list of free blocks); the two marks must come from two different linked descriptions.

Do not accept responses about closing the program window, stopping/terminating the program/process, saving the file or deleting the program from secondary storage/the hard disk.

Ignore statements that main memory is 'managed'/'cleaned up' with no development.

Example answers and how they were marked
Full marks2/2

The operating system updates its memory allocation table to show that the memory locations the program was using are now free, so another program can be loaded into them.

Why: The memory allocation table/record is updated (1) linked to showing the program's memory locations are now free/available (1).

Some marks1/2

The operating system frees up the memory the program was using.

Why: The memory used by the program is freed/released (1), but there is no linked development of what this allows.

No marks0/2

The operating system deletes the program from the hard disk to free up memory.

Why: This confuses main memory with secondary storage; deleting the program from secondary storage is named in the 'Do not accept' line, so no creditworthy point is made.

4Describe2 marksUser Management Swap Remove

A family shares one computer that has a single hard drive.

Describe how the operating system uses user management to limit the amount of storage space each user is allowed.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • A storage limit/quota is set for each user account (1) so the drive is shared fairly between users (1)
  • The operating system records how much space each user's files are using (1) and refuses to save more files when the limit is reached (1)
  • Each user is given a fixed share/quota of the drive (1) so one user cannot use the space set aside for another (1)

Allow a limit set by an administrator or through the operating system's user management settings; an administrator is not required for credit.

Allow a warning that stops the save; do not award the development for a warning alone where the save is not stopped.

Do not accept responses about passwords/authentication, keeping files separate/folders with no storage limit, deleting old files, compressing files, or buying a larger drive.

Do not accept 'the operating system gives the user a bigger hard drive'.

Do not accept a single global limit for all users; the limit must apply to each user/user account.

Example answers and how they were marked
Full marks2/2

The operating system sets a maximum amount of storage for each user account. When a user reaches this limit, the operating system will not let them save any more files.

Why: Storage limit/quota set for each account (1); saving refused at the limit (1).

Some marks1/2

The operating system sets a maximum amount of storage for each user account.

Why: First point of a storage limit set for each user (1), but no development of what happens when it is reached (0).

No marks0/2

The operating system compresses the user's files so that there is more space on the drive.

Why: Describes compression, which does not limit a user's storage; no creditworthy point.

5Explain2 marksProcess Management Swap Remove

An operating system carries out process management.

Explain one reason why an operating system needs to manage processes.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • The CPU can only execute one process at a time (1) so the operating system must decide which process runs next (1)
  • Each process needs CPU time (1) so the operating system must share the CPU between processes (1)
  • One process could use the CPU for too long (1) so the operating system must give other processes a turn (1)
  • A process may be waiting for a resource or user input (1) so the operating system can run another process that is ready (1)
  • The user wants to run more than one program (1) so the operating system must manage which process uses the CPU and when (1)

For both marks, the expansion must follow/associate with the statement.

Allow 'program' for 'process'.

Do not accept 'to manage processes' / 'so processes are managed' without a reason.

Do not accept answers about managing files, memory or peripherals.

Example answers and how they were marked
Full marks2/2

The CPU can only run one process at a time, so the operating system must decide which process gets the CPU and for how long.

Why: Linked point (1) and reason (1).

Some marks1/2

The operating system decides which process runs next.

Why: A correct point (1) but no linked reason.

No marks0/2

So that files can be saved in the right place.

Why: This is file management, not process management, so no creditworthy point.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 45
Data Protection Act 17 questions Impact of AI 16 questions Intellectual Property 12 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.