Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 514 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

5 questions · 9 marks

Pick again
Print
1Short recall1 markUtility Software Swap Remove

Backup software is a type of utility software.

State one purpose of backup software.

[1 mark]
Mark scheme

Award one mark for any of the following:

  • To make/keep a copy of files/data (1)
  • To store the copy separately from the original, e.g. on a different device/in a different location (1)
  • So that data can be restored if the original is lost/damaged/corrupted (1)

Do not accept "to save files" on its own, as saving is normal file management and does not make a separate copy.

Do not accept answers that describe a different utility, such as scanning for malware/viruses (anti-malware software).

Example answers and how they were marked
Full marks1/1

To make a copy of data so it can be restored if the original is lost.

Why: Copy of data (1); the restore point is also present but the maximum is one mark.

No marks0/1

To save files to a hard disk.

Why: Saving files is normal file management and does not make a separate copy; the mark scheme says not to accept this, so no mark.

No marks0/1

To scan files for viruses.

Why: Describes anti-malware software, a different utility; the mark scheme says not to accept answers about another utility, so no mark.

2Short recall2 marksPurpose & Function of Operating Systems Swap Remove

A computer can run more than one process at a time.

Give two tasks carried out by the process management function of an operating system.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Deciding which process runs next on the CPU/scheduling processes (1)
  • Allocating processor/CPU time to processes/allowing multitasking (1)
  • Managing the process life-cycle/process states (ready, running, blocked) (1)
  • Handling interrupts so a running process is suspended and another can run (1)
  • Stopping/terminating a process when it has finished (1)

Do not accept 'managing processes' on its own.

Do not accept 'handling interrupts' on its own.

Do not award two marks for the same task expressed twice, e.g. 'deciding which process runs next' and 'scheduling processes', or 'allocating CPU time' and 'giving each process a share of processor time'.

Do not accept 'managing memory/memory management', 'managing files/file management' or 'managing devices/peripherals' (these are other functions of an operating system).

Example answers and how they were marked
Full marks2/2

Deciding which process runs next on the CPU and stopping a process when it has finished.

Why: Scheduling a process (1) and terminating a process (1) are two different named tasks.

Some marks1/2

Deciding which process runs next and scheduling processes.

Why: Both points are the same task expressed twice, so only one mark is awarded under the guidance.

No marks0/2

Managing processes and managing files.

Why: 'Managing processes' repeats the question and earns nothing; 'managing files' is file management, not process management, so it is not credited.

3Short recall2 marksUser Management Swap Remove

A user must log in before using a computer.

State two methods, other than a password, that an operating system can use to authenticate a user.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Fingerprint scan (1)
  • Face recognition (1)
  • Iris/retina scan (1)
  • Voice recognition (1)
  • Palm print/vein scan (1)
  • Smart card (1)
  • Security token (1)
  • Authenticator app (1)

Allow one-time passcode (OTP) for authenticator app.

Do not accept password (given in the question).

Do not accept username/user ID (it identifies the user but does not authenticate them).

Do not accept 'two-factor authentication' on its own (it is a combination of methods, not a method itself).

Do not accept 'encryption'.

Example answers and how they were marked
Full marks2/2

Fingerprint scan and a smart card.

Why: Fingerprint scan (1) and smart card (1) are two accepted methods.

Some marks1/2

Fingerprint scan and a username.

Why: Fingerprint scan (1); username is not accepted because it does not authenticate the user.

No marks0/2

A username and two-factor authentication.

Why: Username is not accepted because it does not authenticate the user, and two-factor authentication alone is not accepted because it is a combination of methods.

4Describe2 marksMemory Management Swap Remove

An operating system keeps a record of the memory it has allocated to each program.

Describe how this record is used.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • The start and end address/size of the block allocated to each program is recorded (1) so the operating system knows which areas of main memory are in use and which are free (1)
  • The record is checked before memory is allocated (1) so memory already in use is not given to another program/is not overwritten (1)
  • The record is searched for a free block that is large enough (1) so a newly loaded program is placed in a suitable area of main memory (1)
  • The record is updated when a program ends/closes (1) so the memory it was using is marked as free for other programs (1)

Allow the record to be called a memory map/memory table/allocation table.

A response that only says the operating system keeps a record/list of the memory each program is using, without saying what the record contains, earns 0 marks.

A response that states what the record contains, e.g. the addresses/the start and end address of each block, earns 1 mark even if it does not say how the record is used.

Do not accept responses about saving programs/files to secondary storage or about moving programs to virtual memory, as these are not uses of this record.

Example answers and how they were marked
Full marks2/2

The operating system records the start and end address of the block of memory given to each program so that it does not give the same memory to another program.

Why: The start and end address of each block is recorded (1) linked to memory already in use not being given to another program (1).

Some marks1/2

The operating system records the start and end address of the memory used by each program.

Why: States what the record contains (1), but does not develop how the record is used, so the second mark is not earned.

No marks0/2

The operating system saves the programs to the hard disk so there is enough memory for other programs.

Why: Describes moving programs to secondary storage rather than how the record of allocated memory is used; no creditworthy point is made.

5Explain2 marksPeripheral Management Swap Remove

A new printer is connected to a computer.

Explain the purpose of a device driver.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • It allows the operating system/OS to communicate with the device/printer (1) because it translates the commands into signals the device understands (1)
  • It contains/sends the instructions/commands needed by a particular device (1) so the device carries out the correct actions (1)
  • It controls the device/printer (1) by sending commands/signals to it (1)
  • Different devices need different commands (1) so each one needs its own driver to work with the operating system (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'it drives/controls the device' on its own without saying how, e.g. by sending commands/signals.

Do not accept hardware/a physical device (a device driver is software).

Do not accept 'it connects the printer to the computer' or 'it installs the printer' without saying that it provides the instructions/commands for the device.

Example answers and how they were marked
Full marks2/2

It allows the operating system to send commands to the printer (1) because it translates them into signals that the printer understands (1).

Why: Linked point (1) and reason (1).

Some marks1/2

It contains the instructions that the printer needs.

Why: Point (1) but no linked reason.

No marks0/2

It is a piece of hardware that connects the printer to the computer.

Why: Misconception: a device driver is software, not hardware, and saying it connects the printer is not accepted without saying it provides the instructions/commands.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.