Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 514 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

7 questions · 13 marks

Pick again
Print
1Short recall1 markUtility Software Swap Remove

Backup software is a type of utility software.

State one purpose of backup software.

[1 mark]
Mark scheme

Award one mark for any of the following:

  • To make/keep a copy of files/data (1)
  • To store the copy separately from the original, e.g. on a different device/in a different location (1)
  • So that data can be restored if the original is lost/damaged/corrupted (1)

Do not accept "to save files" on its own, as saving is normal file management and does not make a separate copy.

Do not accept answers that describe a different utility, such as scanning for malware/viruses (anti-malware software).

Example answers and how they were marked
Full marks1/1

To make a copy of data so it can be restored if the original is lost.

Why: Copy of data (1); the restore point is also present but the maximum is one mark.

No marks0/1

To save files to a hard disk.

Why: Saving files is normal file management and does not make a separate copy; the mark scheme says not to accept this, so no mark.

No marks0/1

To scan files for viruses.

Why: Describes anti-malware software, a different utility; the mark scheme says not to accept answers about another utility, so no mark.

2Short recall2 marksPurpose & Function of Operating Systems Swap Remove

A computer can run more than one process at a time.

Give two tasks carried out by the process management function of an operating system.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Deciding which process runs next on the CPU/scheduling processes (1)
  • Allocating processor/CPU time to processes/allowing multitasking (1)
  • Managing the process life-cycle/process states (ready, running, blocked) (1)
  • Handling interrupts so a running process is suspended and another can run (1)
  • Stopping/terminating a process when it has finished (1)

Do not accept 'managing processes' on its own.

Do not accept 'handling interrupts' on its own.

Do not award two marks for the same task expressed twice, e.g. 'deciding which process runs next' and 'scheduling processes', or 'allocating CPU time' and 'giving each process a share of processor time'.

Do not accept 'managing memory/memory management', 'managing files/file management' or 'managing devices/peripherals' (these are other functions of an operating system).

Example answers and how they were marked
Full marks2/2

Deciding which process runs next on the CPU and stopping a process when it has finished.

Why: Scheduling a process (1) and terminating a process (1) are two different named tasks.

Some marks1/2

Deciding which process runs next and scheduling processes.

Why: Both points are the same task expressed twice, so only one mark is awarded under the guidance.

No marks0/2

Managing processes and managing files.

Why: 'Managing processes' repeats the question and earns nothing; 'managing files' is file management, not process management, so it is not credited.

3Short recall2 marksPurpose & Function of Operating Systems Swap Remove

A home computer can have more than one user account.

Name two tasks carried out by the user management function of an operating system.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Creating/deleting user accounts (1)
  • Storing usernames and passwords (1)
  • Checking login details/authenticating a user at login (1)
  • Setting access rights/permissions for each user, e.g. restricting which files/folders/programs/drives they can access (1)

Allow logging in as an example of checking login details.

Do not accept managing users on its own.

Do not accept provides a user interface, as this is not user management.

Do not accept managing files or managing processes, as these are other functions.

Do not accept stopping hackers/protecting from malware, as this is security, not user management.

Example answers and how they were marked
Full marks2/2

It stores usernames and passwords and sets access rights for each user.

Why: Storing usernames and passwords (1) and setting access rights (1) are two different user management tasks.

Some marks1/2

It checks the password at login and manages users.

Why: Checking a password at login earns (1); managing users repeats the question and earns nothing.

No marks0/2

It manages users and stops hackers accessing the computer.

Why: Managing users repeats the question; stopping hackers is security, not user management.

4Short recall2 marksUser Management Swap Remove

A user must log in before using a computer.

State two methods, other than a password, that an operating system can use to authenticate a user.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Fingerprint scan (1)
  • Face recognition (1)
  • Iris/retina scan (1)
  • Voice recognition (1)
  • Palm print/vein scan (1)
  • Smart card (1)
  • Security token (1)
  • Authenticator app (1)

Allow one-time passcode (OTP) for authenticator app.

Do not accept password (given in the question).

Do not accept username/user ID (it identifies the user but does not authenticate them).

Do not accept 'two-factor authentication' on its own (it is a combination of methods, not a method itself).

Do not accept 'encryption'.

Example answers and how they were marked
Full marks2/2

Fingerprint scan and a smart card.

Why: Fingerprint scan (1) and smart card (1) are two accepted methods.

Some marks1/2

Fingerprint scan and a username.

Why: Fingerprint scan (1); username is not accepted because it does not authenticate the user.

No marks0/2

A username and two-factor authentication.

Why: Username is not accepted because it does not authenticate the user, and two-factor authentication alone is not accepted because it is a combination of methods.

5Describe2 marksUser Management Swap Remove

A computer can be used by more than one person.

Describe how an operating system uses access rights to protect each user's files.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Each user/file is given permissions/access rights (1) so other users cannot read/write/open/change that user's files (1)
  • A user may be given read-only/read access to a file (1) so they cannot edit/delete/change it (1)
  • Each file is given permissions/access rights for different users (1) so the operating system allows/refuses access depending on which user is logged in (1)
  • The operating system checks a user's permissions/access rights when a file is opened (1) so a user with read-only/read access cannot save/delete changes (1)

Do not accept responses about asking for a password/username, as this checks who the user is, not what they are allowed to do.

Do not accept 'files are protected/safe' or 'access rights protect files' without saying how access is limited (e.g. read-only access, permissions for different users).

Example answers and how they were marked
Full marks2/2

A user can be given read-only access to a file, so they can open it but cannot edit or delete it.

Why: Read-only/read access point (1) and linked development that the user cannot edit/delete the file (1).

Some marks1/2

A user can be given read-only access to a file.

Why: Read-only/read access point (1); no development saying what this prevents, such as being unable to edit/delete the file (0).

No marks0/2

The operating system asks for the password again before the file opens.

Why: Describes asking for a password, which checks who the user is, not access rights to the file; no creditworthy point.

6Explain2 marksMemory Management Swap Remove

When a program closes, the operating system frees the main memory it was using.

Explain one reason why the operating system frees main memory when a program closes.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • The memory can be reused/allocated to another program (1) so other programs have enough main memory to run (1)
  • Freeing the memory stops main memory becoming full (1) so the computer can load/run new programs (1)
  • The closed program's data is no longer needed (1) so keeping it would waste main memory (1)
  • The operating system can give the freed memory to a program that needs more (1) so that program can continue to run (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'to make the computer faster' on its own without saying how freeing memory helps.

Do not accept 'to delete the program' or 'to save the program' because closing a program does not remove it from secondary storage.

Example answers and how they were marked
Full marks2/2

The memory can be reused by another program, so other programs have enough main memory to run.

Why: Linked point (1) about reusing the memory and reason (1) that other programs then have enough memory.

Some marks1/2

So that the memory is free.

Why: Gives the point (1) but does not give a linked reason saying what the free memory is used for.

No marks0/2

So the program is deleted from the computer.

Why: No creditworthy point; closing a program does not delete it from secondary storage.

7Explain2 marksProcess Management Swap Remove

A user opens a web browser.

Explain what the operating system does to get the browser's process ready to run.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • A process is created for the program (1) so that its instructions can be loaded into RAM (1)
  • The process is put into the ready state (1) so that it can wait for the CPU to become available (1)
  • The operating system adds the process to a queue of ready processes (1) so the scheduler can choose it when the CPU is free (1)
  • The operating system allocates the resources the process needs (1) so that it can start running when it is given CPU time (1)

For both marks, the expansion must follow/associate with the statement.

Allow 'main memory' for RAM.

Do not accept 'the browser is downloaded/loaded from the internet'.

Do not accept 'the program is run immediately on the CPU' without the ready step.

Example answers and how they were marked
Full marks2/2

It creates a process and loads the browser's instructions into RAM, then puts the process in the ready state to wait for CPU time.

Why: Linked point (1) and reason (1).

Some marks1/2

It moves the program into RAM.

Why: A correct point (1) but no linked reason about the process being made ready.

No marks0/2

It runs the program straight away on the CPU.

Why: This describes the running state, not making the process ready, so no credit.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.