Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 514 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

8 questions · 15 marks

Pick again
Print
1Short recall1 markUtility Software Swap Remove

Backup software is a type of utility software.

State one purpose of backup software.

[1 mark]
Mark scheme

Award one mark for any of the following:

  • To make/keep a copy of files/data (1)
  • To store the copy separately from the original, e.g. on a different device/in a different location (1)
  • So that data can be restored if the original is lost/damaged/corrupted (1)

Do not accept "to save files" on its own, as saving is normal file management and does not make a separate copy.

Do not accept answers that describe a different utility, such as scanning for malware/viruses (anti-malware software).

Example answers and how they were marked
Full marks1/1

To make a copy of data so it can be restored if the original is lost.

Why: Copy of data (1); the restore point is also present but the maximum is one mark.

No marks0/1

To save files to a hard disk.

Why: Saving files is normal file management and does not make a separate copy; the mark scheme says not to accept this, so no mark.

No marks0/1

To scan files for viruses.

Why: Describes anti-malware software, a different utility; the mark scheme says not to accept answers about another utility, so no mark.

2Short recall2 marksPurpose & Function of Operating Systems Swap Remove

A computer can run more than one process at a time.

Give two tasks carried out by the process management function of an operating system.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Deciding which process runs next on the CPU/scheduling processes (1)
  • Allocating processor/CPU time to processes/allowing multitasking (1)
  • Managing the process life-cycle/process states (ready, running, blocked) (1)
  • Handling interrupts so a running process is suspended and another can run (1)
  • Stopping/terminating a process when it has finished (1)

Do not accept 'managing processes' on its own.

Do not accept 'handling interrupts' on its own.

Do not award two marks for the same task expressed twice, e.g. 'deciding which process runs next' and 'scheduling processes', or 'allocating CPU time' and 'giving each process a share of processor time'.

Do not accept 'managing memory/memory management', 'managing files/file management' or 'managing devices/peripherals' (these are other functions of an operating system).

Example answers and how they were marked
Full marks2/2

Deciding which process runs next on the CPU and stopping a process when it has finished.

Why: Scheduling a process (1) and terminating a process (1) are two different named tasks.

Some marks1/2

Deciding which process runs next and scheduling processes.

Why: Both points are the same task expressed twice, so only one mark is awarded under the guidance.

No marks0/2

Managing processes and managing files.

Why: 'Managing processes' repeats the question and earns nothing; 'managing files' is file management, not process management, so it is not credited.

3Short recall2 marksPurpose & Function of Operating Systems Swap Remove

A home computer can have more than one user account.

Name two tasks carried out by the user management function of an operating system.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Creating/deleting user accounts (1)
  • Storing usernames and passwords (1)
  • Checking login details/authenticating a user at login (1)
  • Setting access rights/permissions for each user, e.g. restricting which files/folders/programs/drives they can access (1)

Allow logging in as an example of checking login details.

Do not accept managing users on its own.

Do not accept provides a user interface, as this is not user management.

Do not accept managing files or managing processes, as these are other functions.

Do not accept stopping hackers/protecting from malware, as this is security, not user management.

Example answers and how they were marked
Full marks2/2

It stores usernames and passwords and sets access rights for each user.

Why: Storing usernames and passwords (1) and setting access rights (1) are two different user management tasks.

Some marks1/2

It checks the password at login and manages users.

Why: Checking a password at login earns (1); managing users repeats the question and earns nothing.

No marks0/2

It manages users and stops hackers accessing the computer.

Why: Managing users repeats the question; stopping hackers is security, not user management.

4Short recall2 marksUser Management Swap Remove

A user must log in before using a computer.

State two methods, other than a password, that an operating system can use to authenticate a user.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Fingerprint scan (1)
  • Face recognition (1)
  • Iris/retina scan (1)
  • Voice recognition (1)
  • Palm print/vein scan (1)
  • Smart card (1)
  • Security token (1)
  • Authenticator app (1)

Allow one-time passcode (OTP) for authenticator app.

Do not accept password (given in the question).

Do not accept username/user ID (it identifies the user but does not authenticate them).

Do not accept 'two-factor authentication' on its own (it is a combination of methods, not a method itself).

Do not accept 'encryption'.

Example answers and how they were marked
Full marks2/2

Fingerprint scan and a smart card.

Why: Fingerprint scan (1) and smart card (1) are two accepted methods.

Some marks1/2

Fingerprint scan and a username.

Why: Fingerprint scan (1); username is not accepted because it does not authenticate the user.

No marks0/2

A username and two-factor authentication.

Why: Username is not accepted because it does not authenticate the user, and two-factor authentication alone is not accepted because it is a combination of methods.

5Describe2 marksFile Management Swap Remove

File management is one function of an operating system.

Describe what the operating system does to the folder structure when a file is moved to a different folder.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Updates/changes the location/path stored for the file (1) so the file can be found in its new folder/location (1)
  • Removes the file's entry/reference from the old folder (1) so the file no longer appears/is listed there (1)
  • Adds/creates an entry/reference for the file in the new folder (1) so the file appears/is listed in its new location (1)
  • Updates the folder/directory listing/structure (1) to show the file's new location/path (1)

Do not accept descriptions of copying the file or leaving a duplicate in the old folder.

Do not accept deleting and recreating the file, or moving the file's data to a different physical location on the disk; the marks are for updating the folder/directory structure.

Example answers and how they were marked
Full marks2/2

It updates the location stored for the file so the file can be found in its new folder.

Why: Linked point (1) and development/outcome (1).

Some marks1/2

It removes the file's entry from the old folder.

Why: Creditworthy point (1) but no linked development.

No marks0/2

It deletes the file from the old folder and saves it again in the new folder.

Why: Describes deleting and recreating the file, which the mark scheme does not accept.

6Describe2 marksMemory Management Swap Remove

An operating system keeps a record of the memory it has allocated to each program.

Describe how this record is used.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • The start and end address/size of the block allocated to each program is recorded (1) so the operating system knows which areas of main memory are in use and which are free (1)
  • The record is checked before memory is allocated (1) so memory already in use is not given to another program/is not overwritten (1)
  • The record is searched for a free block that is large enough (1) so a newly loaded program is placed in a suitable area of main memory (1)
  • The record is updated when a program ends/closes (1) so the memory it was using is marked as free for other programs (1)

Allow the record to be called a memory map/memory table/allocation table.

A response that only says the operating system keeps a record/list of the memory each program is using, without saying what the record contains, earns 0 marks.

A response that states what the record contains, e.g. the addresses/the start and end address of each block, earns 1 mark even if it does not say how the record is used.

Do not accept responses about saving programs/files to secondary storage or about moving programs to virtual memory, as these are not uses of this record.

Example answers and how they were marked
Full marks2/2

The operating system records the start and end address of the block of memory given to each program so that it does not give the same memory to another program.

Why: The start and end address of each block is recorded (1) linked to memory already in use not being given to another program (1).

Some marks1/2

The operating system records the start and end address of the memory used by each program.

Why: States what the record contains (1), but does not develop how the record is used, so the second mark is not earned.

No marks0/2

The operating system saves the programs to the hard disk so there is enough memory for other programs.

Why: Describes moving programs to secondary storage rather than how the record of allocated memory is used; no creditworthy point is made.

7Describe2 marksUser Management Swap Remove

A family shares one computer that has a single hard drive.

Describe how the operating system uses user management to limit the amount of storage space each user is allowed.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • A storage limit/quota is set for each user account (1) so the drive is shared fairly between users (1)
  • The operating system records how much space each user's files are using (1) and refuses to save more files when the limit is reached (1)
  • Each user is given a fixed share/quota of the drive (1) so one user cannot use the space set aside for another (1)

Allow a limit set by an administrator or through the operating system's user management settings; an administrator is not required for credit.

Allow a warning that stops the save; do not award the development for a warning alone where the save is not stopped.

Do not accept responses about passwords/authentication, keeping files separate/folders with no storage limit, deleting old files, compressing files, or buying a larger drive.

Do not accept 'the operating system gives the user a bigger hard drive'.

Do not accept a single global limit for all users; the limit must apply to each user/user account.

Example answers and how they were marked
Full marks2/2

The operating system sets a maximum amount of storage for each user account. When a user reaches this limit, the operating system will not let them save any more files.

Why: Storage limit/quota set for each account (1); saving refused at the limit (1).

Some marks1/2

The operating system sets a maximum amount of storage for each user account.

Why: First point of a storage limit set for each user (1), but no development of what happens when it is reached (0).

No marks0/2

The operating system compresses the user's files so that there is more space on the drive.

Why: Describes compression, which does not limit a user's storage; no creditworthy point.

8Explain2 marksMemory Management Swap Remove

When a program closes, the operating system frees the main memory it was using.

Explain one reason why the operating system frees main memory when a program closes.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • The memory can be reused/allocated to another program (1) so other programs have enough main memory to run (1)
  • Freeing the memory stops main memory becoming full (1) so the computer can load/run new programs (1)
  • The closed program's data is no longer needed (1) so keeping it would waste main memory (1)
  • The operating system can give the freed memory to a program that needs more (1) so that program can continue to run (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'to make the computer faster' on its own without saying how freeing memory helps.

Do not accept 'to delete the program' or 'to save the program' because closing a program does not remove it from secondary storage.

Example answers and how they were marked
Full marks2/2

The memory can be reused by another program, so other programs have enough main memory to run.

Why: Linked point (1) about reusing the memory and reason (1) that other programs then have enough memory.

Some marks1/2

So that the memory is free.

Why: Gives the point (1) but does not give a linked reason saying what the free memory is used for.

No marks0/2

So the program is deleted from the computer.

Why: No creditworthy point; closing a program does not delete it from secondary storage.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.