Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 514 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

8 questions · 19 marks

Pick again
Print
1Short recall1 markUtility Software Swap Remove

Backup software is a type of utility software.

State one purpose of backup software.

[1 mark]
Mark scheme

Award one mark for any of the following:

  • To make/keep a copy of files/data (1)
  • To store the copy separately from the original, e.g. on a different device/in a different location (1)
  • So that data can be restored if the original is lost/damaged/corrupted (1)

Do not accept "to save files" on its own, as saving is normal file management and does not make a separate copy.

Do not accept answers that describe a different utility, such as scanning for malware/viruses (anti-malware software).

Example answers and how they were marked
Full marks1/1

To make a copy of data so it can be restored if the original is lost.

Why: Copy of data (1); the restore point is also present but the maximum is one mark.

No marks0/1

To save files to a hard disk.

Why: Saving files is normal file management and does not make a separate copy; the mark scheme says not to accept this, so no mark.

No marks0/1

To scan files for viruses.

Why: Describes anti-malware software, a different utility; the mark scheme says not to accept answers about another utility, so no mark.

2Short recall2 marksPurpose & Function of Operating Systems Swap Remove

A computer can run more than one process at a time.

Give two tasks carried out by the process management function of an operating system.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Deciding which process runs next on the CPU/scheduling processes (1)
  • Allocating processor/CPU time to processes/allowing multitasking (1)
  • Managing the process life-cycle/process states (ready, running, blocked) (1)
  • Handling interrupts so a running process is suspended and another can run (1)
  • Stopping/terminating a process when it has finished (1)

Do not accept 'managing processes' on its own.

Do not accept 'handling interrupts' on its own.

Do not award two marks for the same task expressed twice, e.g. 'deciding which process runs next' and 'scheduling processes', or 'allocating CPU time' and 'giving each process a share of processor time'.

Do not accept 'managing memory/memory management', 'managing files/file management' or 'managing devices/peripherals' (these are other functions of an operating system).

Example answers and how they were marked
Full marks2/2

Deciding which process runs next on the CPU and stopping a process when it has finished.

Why: Scheduling a process (1) and terminating a process (1) are two different named tasks.

Some marks1/2

Deciding which process runs next and scheduling processes.

Why: Both points are the same task expressed twice, so only one mark is awarded under the guidance.

No marks0/2

Managing processes and managing files.

Why: 'Managing processes' repeats the question and earns nothing; 'managing files' is file management, not process management, so it is not credited.

3Short recall2 marksPurpose & Function of Operating Systems Swap Remove

A home computer can have more than one user account.

Name two tasks carried out by the user management function of an operating system.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Creating/deleting user accounts (1)
  • Storing usernames and passwords (1)
  • Checking login details/authenticating a user at login (1)
  • Setting access rights/permissions for each user, e.g. restricting which files/folders/programs/drives they can access (1)

Allow logging in as an example of checking login details.

Do not accept managing users on its own.

Do not accept provides a user interface, as this is not user management.

Do not accept managing files or managing processes, as these are other functions.

Do not accept stopping hackers/protecting from malware, as this is security, not user management.

Example answers and how they were marked
Full marks2/2

It stores usernames and passwords and sets access rights for each user.

Why: Storing usernames and passwords (1) and setting access rights (1) are two different user management tasks.

Some marks1/2

It checks the password at login and manages users.

Why: Checking a password at login earns (1); managing users repeats the question and earns nothing.

No marks0/2

It manages users and stops hackers accessing the computer.

Why: Managing users repeats the question; stopping hackers is security, not user management.

4Describe2 marksFile Management Swap Remove

A user deletes an unwanted file from their computer.

Describe what happens when the file is deleted.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • The file's entry is removed from the folder/directory (1) so the file no longer appears in the list of files/is no longer listed (1)
  • The (disk) space used by the file is marked as free/available/unused (1) so another file can be saved/stored in that space (1)
  • The file's data/contents are not erased/removed (1) so the file may still be recovered until the space is overwritten (1)

A point stated without development, e.g. 'the file is removed from the folder', earns one mark only.

For the first mark, accept that the file's entry is removed from the folder/directory; the second mark must state that the file no longer appears/is listed.

Do not accept 'stays on disk' alone for the third point; accept 'data is not erased' or 'contents remain'.

Do not accept 'the file is wiped from the disk straight away' or 'the data is destroyed and can never be recovered'.

Do not accept 'the file is moved to the recycle bin/bin' or 'the file is deleted from the hard drive' on its own, as this does not describe what happens to the file or the disk space.

Do not accept responses about moving the file to another folder.

Example answers and how they were marked
Full marks2/2

The space the file used is marked as free so another file can be saved in that space.

Why: Linked point (1) and development (1): space marked free and another file can be saved.

Some marks1/2

The file is removed from the folder.

Why: Point (1) only; no development about the file no longer being listed.

No marks0/2

The data is wiped from the disk straight away so it can never be recovered.

Why: Common misconception; 'wiped straight away' is not accepted, so no mark.

5Describe2 marksMemory Management Swap Remove

An operating system keeps a record of the memory it has allocated to each program.

Describe how this record is used.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • The start and end address/size of the block allocated to each program is recorded (1) so the operating system knows which areas of main memory are in use and which are free (1)
  • The record is checked before memory is allocated (1) so memory already in use is not given to another program/is not overwritten (1)
  • The record is searched for a free block that is large enough (1) so a newly loaded program is placed in a suitable area of main memory (1)
  • The record is updated when a program ends/closes (1) so the memory it was using is marked as free for other programs (1)

Allow the record to be called a memory map/memory table/allocation table.

A response that only says the operating system keeps a record/list of the memory each program is using, without saying what the record contains, earns 0 marks.

A response that states what the record contains, e.g. the addresses/the start and end address of each block, earns 1 mark even if it does not say how the record is used.

Do not accept responses about saving programs/files to secondary storage or about moving programs to virtual memory, as these are not uses of this record.

Example answers and how they were marked
Full marks2/2

The operating system records the start and end address of the block of memory given to each program so that it does not give the same memory to another program.

Why: The start and end address of each block is recorded (1) linked to memory already in use not being given to another program (1).

Some marks1/2

The operating system records the start and end address of the memory used by each program.

Why: States what the record contains (1), but does not develop how the record is used, so the second mark is not earned.

No marks0/2

The operating system saves the programs to the hard disk so there is enough memory for other programs.

Why: Describes moving programs to secondary storage rather than how the record of allocated memory is used; no creditworthy point is made.

6Describe2 marksUser Management Swap Remove

A family shares one computer that has a single hard drive.

Describe how the operating system uses user management to limit the amount of storage space each user is allowed.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • A storage limit/quota is set for each user account (1) so the drive is shared fairly between users (1)
  • The operating system records how much space each user's files are using (1) and refuses to save more files when the limit is reached (1)
  • Each user is given a fixed share/quota of the drive (1) so one user cannot use the space set aside for another (1)

Allow a limit set by an administrator or through the operating system's user management settings; an administrator is not required for credit.

Allow a warning that stops the save; do not award the development for a warning alone where the save is not stopped.

Do not accept responses about passwords/authentication, keeping files separate/folders with no storage limit, deleting old files, compressing files, or buying a larger drive.

Do not accept 'the operating system gives the user a bigger hard drive'.

Do not accept a single global limit for all users; the limit must apply to each user/user account.

Example answers and how they were marked
Full marks2/2

The operating system sets a maximum amount of storage for each user account. When a user reaches this limit, the operating system will not let them save any more files.

Why: Storage limit/quota set for each account (1); saving refused at the limit (1).

Some marks1/2

The operating system sets a maximum amount of storage for each user account.

Why: First point of a storage limit set for each user (1), but no development of what happens when it is reached (0).

No marks0/2

The operating system compresses the user's files so that there is more space on the drive.

Why: Describes compression, which does not limit a user's storage; no creditworthy point.

7Explain2 marksProcess Management Swap Remove

A user opens a web browser.

Explain what the operating system does to get the browser's process ready to run.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • A process is created for the program (1) so that its instructions can be loaded into RAM (1)
  • The process is put into the ready state (1) so that it can wait for the CPU to become available (1)
  • The operating system adds the process to a queue of ready processes (1) so the scheduler can choose it when the CPU is free (1)
  • The operating system allocates the resources the process needs (1) so that it can start running when it is given CPU time (1)

For both marks, the expansion must follow/associate with the statement.

Allow 'main memory' for RAM.

Do not accept 'the browser is downloaded/loaded from the internet'.

Do not accept 'the program is run immediately on the CPU' without the ready step.

Example answers and how they were marked
Full marks2/2

It creates a process and loads the browser's instructions into RAM, then puts the process in the ready state to wait for CPU time.

Why: Linked point (1) and reason (1).

Some marks1/2

It moves the program into RAM.

Why: A correct point (1) but no linked reason about the process being made ready.

No marks0/2

It runs the program straight away on the CPU.

Why: This describes the running state, not making the process ready, so no credit.

8Discuss6 marksUser Management Swap Remove

A school library has 24 computers that are shared by students and teachers throughout the day. Each computer runs an operating system. The school wants users' work to be kept private and the computers to be used only by authorised people.

Discuss how the operating system's user management features can be used to share the computers securely.

Your answer should include:

  • user accounts
  • authentication
  • the benefits for the school.
[6 marks]
Mark scheme

Indicative content

User accounts

  • Each student and teacher should have their own user account, so the operating system can identify the person who is logged on.
  • The operating system keeps a record of all valid users on the computer, so unknown users are not allowed to log in.
  • A separate home area or folder can be created for each account, so a student's saved work is kept apart from other users' work.
  • An account can be disabled when a student leaves the school, so they can no longer access the computers.

Authentication

  • A username and password can be required at login, so only users with the correct details can use the computer.
  • The operating system checks the entered password against the stored password for that account before allowing access.
  • Users should be encouraged to choose a strong password, which makes it harder for someone else to guess and log in.
  • The operating system can lock an account after several failed login attempts, which reduces the chance of someone trying passwords repeatedly.

Benefits for the school

  • Many students can share the same computers because each person's files are kept separate.
  • Work is less likely to be deleted or changed by another student, because users only see their own files.
  • The school can see which account was used on a computer, so misuse can be traced to a user.
  • Teachers can be confident that only authorised people can use the library computers.
  • The school does not need a separate computer for every student, so it saves money.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Level 3 responses must cover both user accounts and authentication, and apply them to the school library.

Do not accept general operating system functions such as file management or process management unless they are explicitly linked to managing users.

Example answers and how they were marked
Full marks6/6

Each student and teacher should have their own user account with a username and password. When someone logs in, the operating system checks the password against the one stored for that account, so only authorised people can use the computer. Each account can have its own home folder, so a student's work is kept private and another student cannot open or delete it. If a student leaves the school, their account can be disabled so they cannot log in again. This lets the school share a smaller number of computers safely, as each user's work stays separate and any misuse can be traced to the logged-in account.

Why: Level 3. It explains user accounts, authentication and benefits, with sustained links to sharing computers in the school library.

Some marks4/6

Every user should have a username and password. The operating system checks the password so that people who are not allowed cannot log in. Each user should also have their own area to save files so they do not delete other people's work.

Why: Level 2. Basic accounts and authentication points are made and linked, but the benefits to the school are only briefly applied and not developed.

No marks0/6

The operating system manages the users by looking after the files in folders and by making sure the printer works for everyone. It also keeps the computer running quickly when lots of students use it.

Why: Level 0. These are general operating system functions such as file management and peripheral management, not user management, so no creditworthy point is made.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.