Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 631 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

5 questions · 7 marks

Pick again
Print
1Multiple choice1 markPrimary Memory Swap Remove

A computer is running an application. The application's data and instructions are transferred from secondary storage into RAM before the CPU processes them.

Identify the reason for this transfer.

[1 mark]
  • ARAM is non-volatile
  • BRAM is faster to access than secondary storage
  • CRAM has a larger capacity than secondary storage
  • DRAM is cheaper than secondary storage
Mark scheme
  • B RAM is faster to access than secondary storage (1)
  • The only correct answer is B. The correct answer is RAM is faster to access than secondary storage.
  • A is not correct because RAM is volatile
  • C is not correct because RAM has a smaller capacity than secondary storage
  • D is not correct because RAM is more expensive than secondary storage
Example answers and how they were marked
Full marks1/1

B RAM is faster to access than secondary storage

Why: Selects the correct option: RAM is faster to access than secondary storage, so data and instructions can reach the CPU quickly (1).

No marks0/1

A RAM is non-volatile

Why: Near miss: RAM is volatile; this does not explain the transfer into RAM.

No marks0/1

C RAM has a larger capacity than secondary storage

Why: Misconception: assumes primary memory has a larger capacity, but RAM has a smaller capacity than secondary storage.

2Multiple choice1 markStored Program Computers Swap Remove

Identify the component of the CPU that carries out arithmetic and logical operations.

[1 mark]
  • AArithmetic logic unit
  • BControl unit
  • CMain memory
  • DRegister
Mark scheme
  • A Arithmetic logic unit (1)
  • The only correct answer is A. The correct answer is arithmetic logic unit.
  • B is not correct because the control unit decodes instructions and controls the CPU
  • C is not correct because main memory is not part of the CPU and stores data and instructions
  • D is not correct because a register stores small amounts of data within the CPU
Example answers and how they were marked
Full marks1/1

A Arithmetic logic unit

Why: Correct option: the arithmetic logic unit carries out arithmetic and logical operations (1).

No marks0/1

B Control unit

Why: Control unit is a CPU component but its role is to decode and control, not perform arithmetic or logical operations, so no mark.

No marks0/1

D Register

Why: Register stores data but does not carry out operations; a common misconception that any CPU component performs calculations, so no mark.

3Short recall1 markPrimary Memory Swap Remove

Computers use RAM to store the data and instructions that are in use.

Name the term used to describe memory that loses its contents when the power is switched off.

[1 mark]
Mark scheme

Award one mark for:

  • Volatile (1)

Allow volatile memory / it is volatile.

Do not accept non-volatile, ROM, RAM or temporary/short term memory on their own, as these are not the term asked for.

Example answers and how they were marked
Full marks1/1

Volatile

Why: Correct term for memory that loses its contents when the power is switched off (1).

No marks0/1

Temporary memory

Why: Describes what such memory does but is not the term asked for; 'temporary memory' is on the Do not accept line, so no mark.

No marks0/1

Non-volatile

Why: Non-volatile memory keeps its contents when the power is switched off, the opposite of what the question describes; it is explicitly not accepted.

4Short recall2 marksStored Program Computers Swap Remove

Computers use the von Neumann stored program concept.

Define the term stored program concept.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Program instructions are stored in main memory/RAM (1)
  • The data used by the program is stored in main memory/RAM (1)
  • The CPU fetches/reads instructions from main memory to execute them (1)
  • The program can be run without the instructions being input again (1)

Allow 'the program is stored in memory' for one mark.

Do not accept answers about programs being stored on secondary storage, such as a hard disk or USB memory stick.

Do not accept answers that only describe the von Neumann architecture (e.g. having a CPU and memory) without stating that instructions are stored in main memory.

Example answers and how they were marked
Full marks2/2

Both the program instructions and the data the program uses are held in the same main memory, and the CPU fetches these instructions from memory to execute them.

Why: Instructions stored in main memory (1) and the CPU fetches instructions from memory to execute them (1).

Some marks1/2

Program instructions are stored in main memory.

Why: Instructions stored in main memory (1). No second point about data being stored in the same memory or about the CPU fetching instructions.

No marks0/2

The program is saved on the hard disk so that it can be loaded into RAM when the user runs it.

Why: A near-miss about secondary storage, which the mark scheme says not to accept; the stored program concept is about instructions being held in main memory.

5Explain2 marksEmbedded Systems Swap Remove

An engine control unit (ECU) in a car is an embedded system.

Explain one benefit of using an embedded system for the engine control unit instead of a general purpose computer.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • (The ECU) is more reliable/less likely to crash (1) because it only runs the one program/has a single purpose (1)
  • (The ECU) cannot be affected by other software/viruses (1) because it cannot run other software/it can only run the program it was made for (1)
  • (The ECU) is cheaper (1) because it has limited processing resources/less memory/simple components (1)
  • (The ECU) uses less power (1) because it has limited processing resources/a simpler processor (1)
  • (The ECU) is smaller (1) because it has fewer components/less memory than a general purpose computer (1)

For both marks, the expansion must follow/associate with the statement.

A suitable benefit stated on its own earns one mark.

Do not accept a description or a location given as the reason, e.g. 'because it is part of the car', 'because it is inside the engine', 'because it is embedded'.

Do not accept a description of an embedded system on its own as the benefit, e.g. 'it does one specific job' or 'it is part of the car'.

Do not accept 'it is faster'/'it has a more powerful processor' as embedded systems have limited processing resources.

Example answers and how they were marked
Full marks2/2

It is more reliable than a general purpose computer (1) because it only runs the one program so it will not crash and stop the engine working (1).

Why: Benefit stated (1) with a linked reason (1); the reason shows why only running one program makes it reliable.

Some marks1/2

It is more reliable (1) because it is part of the car's engine (1).

Why: Only the benefit earns a mark (1); being part of the car is a location, not a linked reason why it is reliable.

No marks0/2

It is faster than a general purpose computer (0) because it is embedded in the engine (0).

Why: Misconception that an embedded system is faster; embedded systems have limited processing resources, so neither point nor reason is creditworthy.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 45
Data Protection Act 17 questions Impact of AI 16 questions Intellectual Property 12 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.