Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 6 marks

Pick again
Print
1Multiple choice1 markPrimary Memory Swap Remove

A computer is running an application. The application's data and instructions are transferred from secondary storage into RAM before the CPU processes them.

Identify the reason for this transfer.

[1 mark]
  • ARAM is non-volatile
  • BRAM is faster to access than secondary storage
  • CRAM has a larger capacity than secondary storage
  • DRAM is cheaper than secondary storage
Mark scheme
  • B RAM is faster to access than secondary storage (1)
  • The only correct answer is B. The correct answer is RAM is faster to access than secondary storage.
  • A is not correct because RAM is volatile
  • C is not correct because RAM has a smaller capacity than secondary storage
  • D is not correct because RAM is more expensive than secondary storage
Example answers and how they were marked
Full marks1/1

B RAM is faster to access than secondary storage

Why: Selects the correct option: RAM is faster to access than secondary storage, so data and instructions can reach the CPU quickly (1).

No marks0/1

A RAM is non-volatile

Why: Near miss: RAM is volatile; this does not explain the transfer into RAM.

No marks0/1

C RAM has a larger capacity than secondary storage

Why: Misconception: assumes primary memory has a larger capacity, but RAM has a smaller capacity than secondary storage.

2Multiple choice1 markSecondary Memory Swap Remove

A company stores films on optical media.

Identify the optical storage medium that can store the most data.

[1 mark]
  • ABlu-ray Disc
  • BCD
  • CDVD
  • DMagnetic tape
Mark scheme
  • A Blu-ray Disc (1)
  • The only correct answer is A. The correct answer is Blu-ray Disc.
  • B is not correct because a CD stores less data than a Blu-ray Disc, up to about 700 MB
  • C is not correct because a DVD stores less data than a Blu-ray Disc, up to about 4.7 GB (single-layer) or 8.4 GB (dual-layer)
  • D is not correct because magnetic tape is not an optical storage medium
Example answers and how they were marked
Full marks1/1

A Blu-ray Disc

Why: Correct option (1): a Blu-ray Disc has the greatest capacity of the optical media.

No marks0/1

C DVD

Why: Near miss scoring 0: a DVD is optical but stores less than a Blu-ray Disc (mark scheme line C). Only A is credited.

No marks0/1

D Magnetic tape

Why: Misconception scoring 0: candidates pick tape for its large capacity but magnetic tape is not an optical storage medium (mark scheme line D).

3Describe2 marksEmbedded Systems Swap Remove

A greenhouse uses an embedded system to control the growing conditions for plants.

Describe how the embedded system controls the growing conditions in the greenhouse.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • It reads/monitors the temperature/humidity/light level using sensors (1) to switch the heaters/vents/lamps/watering system on or off when the reading is outside the set range (1)
  • It compares the readings from the sensors with the set values/thresholds stored in its memory (1) to decide whether the conditions need to be changed (1)
  • It monitors the light level using a light sensor (1) and turns the lamps on when the light falls below the level the plants need (1)
  • It monitors the soil moisture using a soil moisture sensor (1) and turns the water pump/irrigation on when the soil is too dry (1)

For the second mark, the action/response must be linked to the sensor reading given in the first point.

Allow named sensors (temperature/humidity/light/soil moisture) and named outputs (heater, fan, vent/window, lamp, irrigation/water pump).

Do not accept answers that only name a sensor or only name an output, e.g. 'it has a temperature sensor and a heater', as there is no link between the reading and the control action.

Do not accept answers where a person switches the equipment on or off, as the embedded system controls the conditions automatically.

Example answers and how they were marked
Full marks2/2

The embedded system reads the temperature using a sensor and switches the heater on when the temperature is below the set value.

Why: Sensor reading point (1) and linked control action (1).

Some marks1/2

The embedded system compares the readings from the sensors with the set values stored in its memory.

Why: First point only (1) - the comparison with stored values - with no linked action.

No marks0/2

The greenhouse has a temperature sensor and a heater.

Why: Only names a sensor and an output, which the mark scheme says is not accepted.

4Explain2 marksEmbedded Systems Swap Remove

A greenhouse uses an embedded system to keep the plants healthy.

Explain how the embedded system controls the temperature in the greenhouse.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • A temperature sensor measures/reads the temperature in the greenhouse (1) which the processor compares with the value stored in the system (1)
  • The heater is switched on (1) when the temperature reading goes below the value stored in the system (1)
  • A fan/vent/window is opened/a cooler is switched on (1) when the temperature reading goes above the value stored in the system (1)
  • The temperature is checked/measured continuously (1) so the heater/fan is switched on or off as soon as the temperature changes (1)

For both marks, the expansion must follow/associate with the statement.

Allow one mark for a correct point on its own without a linked reason, e.g. 'a temperature sensor measures the temperature'.

Do not award 'the embedded system controls/keeps the temperature correct' as this repeats the question.

Do not accept naming a device without saying what it does, e.g. 'the greenhouse has a thermostat'.

Example answers and how they were marked
Full marks2/2

A temperature sensor measures the temperature in the greenhouse, which the processor compares with the value stored in the system.

Why: Point (1): the input and what it measures. Reason (1): the linked statement about what the processor does with the reading.

Some marks1/2

The embedded system uses a temperature sensor that measures the temperature in the greenhouse.

Why: A correct point on its own (1); no linked statement about what the system does with the reading, so the second mark is not awarded.

No marks0/2

The embedded system controls the temperature so the plants do not get too cold.

Why: Rewords the question without saying how the temperature is measured or changed, so no mark is awarded.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 71
Data Protection Act 17 questions Impact of AI 18 questions Intellectual Property 18 questions Software Licences 18 questions

5.3 Cybersecurity

Build a paper on this topic 36
Malware 18 questions Social Engineering 18 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.