Edexcel GCSE Computer Science (1CP2) Exam Questions

Award up to two marks for a linked description such as:

• It controls the motors/rotors (1) so that the drone can take off, hover, turn and land (1)
• It keeps the drone stable/level automatically (1) by taking readings from a sensor (accelerometer/gyroscope/GPS) (1)
• It receives signals from the remote control (1) and changes the speed of the motors to steer the drone (1)
• It monitors the battery level (1) and brings the drone back to the ground before the battery runs out (1)

The development must relate to the function given in the point.

Accept a named function that the embedded system controls, e.g. 'it keeps the drone level', as the first mark (1).

Award the second mark only when the development gives a specific outcome or detail of that function, e.g. 'so that the drone can take off, hover, turn and land' or 'by changing the motor speeds to keep it level'.

Do not award the second mark for a generic outcome such as 'so it works', 'so it can fly' or 'so the drone moves'.

A bare 'it controls the motors so it can fly' therefore earns the first mark only.

Allow any other specific function of a drone that is carried out by the embedded system.

Do not accept 'it flies the drone' / 'it is the drone's brain' / 'it makes the drone work' without a named function being controlled.

Do not accept answers that describe the user or the remote control flying the drone with no function carried out by the embedded system.

Award up to two marks for a linked description such as:

• It reads/monitors the temperature/humidity/light level using sensors (1) to switch the heaters/vents/lamps/watering system on or off when the reading is outside the set range (1)
• It compares the readings from the sensors with the set values/thresholds stored in its memory (1) to decide whether the conditions need to be changed (1)
• It monitors the light level using a light sensor (1) and turns the lamps on when the light falls below the level the plants need (1)
• It monitors the soil moisture using a soil moisture sensor (1) and turns the water pump/irrigation on when the soil is too dry (1)

For the second mark, the action/response must be linked to the sensor reading given in the first point.

Allow named sensors (temperature/humidity/light/soil moisture) and named outputs (heater, fan, vent/window, lamp, irrigation/water pump).

Do not accept answers that only name a sensor or only name an output, e.g. 'it has a temperature sensor and a heater', as there is no link between the reading and the control action.

Do not accept answers where a person switches the equipment on or off, as the embedded system controls the conditions automatically.

Award up to two marks for a linked explanation such as:

• Decodes/interprets/translates the instruction (1) to work out what the instruction is/what operation is required (1)
• Sends control signals to the other components (1) so that the correct component carries out the instruction (1), e.g. the ALU/main memory
• Controls the fetch of the instruction from main memory (1) because the address of the next instruction is sent via the address bus (1)
• Controls the fetch of the next instruction from main memory (1) by sending a control signal/read signal to main memory (1)

For both marks, the expansion must follow/associate with the statement.

For the decode point, 'decodes the instruction' alone gains 1 mark; a second mark needs the purpose of decoding, i.e. working out what the instruction is/what operation is required.

Do not accept 'it controls the CPU' on its own, without naming a task in the cycle.

Do not accept 'it fetches the instruction from memory' on its own, as this describes the fetch step rather than the control unit's role; credit only if linked to controlling/signalling the fetch.

Do not accept carrying out arithmetic/logical operations, as these are carried out by the ALU, or holding the address of the next instruction, as this is the program counter.

Do not accept storing the instruction in a register (e.g. MAR/MDR), as this is not the role of the control unit.

Indicative content

Why the report was lost

• The report was being created and edited in RAM, which is volatile.
• Volatile memory loses its contents when the power supply is removed.
• The power cut removed the power, so the data in RAM was lost.
• The report had not been saved to secondary storage before the power cut.
• Only data that had been saved to secondary storage would remain after the power cut.

The difference between RAM and secondary storage

• RAM is volatile and holds data temporarily while the computer is on.
• Secondary storage is non-volatile and keeps data permanently when the power is off.
• RAM is directly accessible by the CPU and is much faster than secondary storage.
• Secondary storage has a larger capacity and is cheaper per gigabyte than RAM.
• RAM holds the programs and data currently in use; secondary storage holds files for long-term storage.

How the employee could prevent this in future

• The employee should save the report regularly to secondary storage, such as the hard drive or a USB flash drive.
• The employee could enable autosave or autosave/recovery features in the word processor.
• The employee could use cloud storage that saves changes automatically.
• The employee could use an uninterruptible power supply (UPS) or battery to keep the laptop on during a power cut.
• The employee should not rely on RAM to keep work permanently.

Levels

• Level 0 (0 marks): No rewardable content.
• Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
• Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
• Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

• Level 3 responses must explain that RAM is volatile and contrast this with non-volatile secondary storage.
• Do not award marks for stating that the report was lost from secondary storage unless it had been saved there.