Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 659 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

5 questions · 14 marks

Pick again
Print
1Short recall2 marksSoftware Basics Swap Remove

Every computer system needs an operating system.

State two functions of an operating system.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • File management (1)
  • Process management (1)
  • Peripheral management (1)
  • User management (1)

Allow 'managing files', 'managing processes', 'managing peripherals', 'managing users'.

Do not accept examples of utility software, such as anti-malware, backup or defragmentation, as these are not functions of the operating system.

Do not accept 'runs/loads the programs' on its own.

Example answers and how they were marked
Full marks2/2

File management and process management.

Why: Two creditworthy functions from the list, one mark each (1) + (1).

Some marks1/2

It does file management and it loads the programs that the user wants to run.

Why: File management earns one mark (1); 'loads the programs' is not one of the listed functions, so no second mark.

No marks0/2

Anti-malware and backup.

Why: These are examples of utility software, not functions of the operating system, so no mark is awarded.

2Describe2 marksMemory Management Swap Remove

An operating system keeps a record of the memory it has allocated to each program.

Describe how this record is used.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • The start and end address/size of the block allocated to each program is recorded (1) so the operating system knows which areas of main memory are in use and which are free (1)
  • The record is checked before memory is allocated (1) so memory already in use is not given to another program/is not overwritten (1)
  • The record is searched for a free block that is large enough (1) so a newly loaded program is placed in a suitable area of main memory (1)
  • The record is updated when a program ends/closes (1) so the memory it was using is marked as free for other programs (1)

Allow the record to be called a memory map/memory table/allocation table.

A response that only says the operating system keeps a record/list of the memory each program is using, without saying what the record contains, earns 0 marks.

A response that states what the record contains, e.g. the addresses/the start and end address of each block, earns 1 mark even if it does not say how the record is used.

Do not accept responses about saving programs/files to secondary storage or about moving programs to virtual memory, as these are not uses of this record.

Example answers and how they were marked
Full marks2/2

The operating system records the start and end address of the block of memory given to each program so that it does not give the same memory to another program.

Why: The start and end address of each block is recorded (1) linked to memory already in use not being given to another program (1).

Some marks1/2

The operating system records the start and end address of the memory used by each program.

Why: States what the record contains (1), but does not develop how the record is used, so the second mark is not earned.

No marks0/2

The operating system saves the programs to the hard disk so there is enough memory for other programs.

Why: Describes moving programs to secondary storage rather than how the record of allocated memory is used; no creditworthy point is made.

3Describe2 marksUser Management Swap Remove

A computer can be used by more than one person.

Describe how an operating system uses access rights to protect each user's files.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Each user/file is given permissions/access rights (1) so other users cannot read/write/open/change that user's files (1)
  • A user may be given read-only/read access to a file (1) so they cannot edit/delete/change it (1)
  • Each file is given permissions/access rights for different users (1) so the operating system allows/refuses access depending on which user is logged in (1)
  • The operating system checks a user's permissions/access rights when a file is opened (1) so a user with read-only/read access cannot save/delete changes (1)

Do not accept responses about asking for a password/username, as this checks who the user is, not what they are allowed to do.

Do not accept 'files are protected/safe' or 'access rights protect files' without saying how access is limited (e.g. read-only access, permissions for different users).

Example answers and how they were marked
Full marks2/2

A user can be given read-only access to a file, so they can open it but cannot edit or delete it.

Why: Read-only/read access point (1) and linked development that the user cannot edit/delete the file (1).

Some marks1/2

A user can be given read-only access to a file.

Why: Read-only/read access point (1); no development saying what this prevents, such as being unable to edit/delete the file (0).

No marks0/2

The operating system asks for the password again before the file opens.

Why: Describes asking for a password, which checks who the user is, not access rights to the file; no creditworthy point.

4Explain2 marksPeripheral Management Swap Remove

A new printer is connected to a computer.

Explain the purpose of a device driver.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • It allows the operating system/OS to communicate with the device/printer (1) because it translates the commands into signals the device understands (1)
  • It contains/sends the instructions/commands needed by a particular device (1) so the device carries out the correct actions (1)
  • It controls the device/printer (1) by sending commands/signals to it (1)
  • Different devices need different commands (1) so each one needs its own driver to work with the operating system (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'it drives/controls the device' on its own without saying how, e.g. by sending commands/signals.

Do not accept hardware/a physical device (a device driver is software).

Do not accept 'it connects the printer to the computer' or 'it installs the printer' without saying that it provides the instructions/commands for the device.

Example answers and how they were marked
Full marks2/2

It allows the operating system to send commands to the printer because it translates them into signals that the printer understands.

Why: Linked point (1) and reason (1).

Some marks1/2

It contains the instructions that the printer needs.

Why: Point (1) but no linked reason.

No marks0/2

It is a piece of hardware that connects the printer to the computer.

Why: Misconception: a device driver is software, not hardware, and saying it connects the printer is not accepted without saying it provides the instructions/commands.

5Discuss6 marksUtility Software Swap Remove

A small graphic design company keeps all of its project files on one desktop computer. The computer's hard disk has failed and some files have been lost. The owner has been told to use backup software.

Discuss the backup strategy the company should use.

Your answer should include:

  • the types of backup that could be used
  • where and how often backups should be made
  • how the backups would be used if the hard disk failed again.
[6 marks]
Mark scheme

Indicative content

Types of backup that could be used

  • A full backup copies all of the company's project files every time it is run, so the whole set of files is held together in one backup.
  • A full backup takes longer to make and needs more storage space than an incremental backup.
  • An incremental backup copies only the files that have changed since the previous backup, so it is quicker to run each evening.
  • Restoring from incremental backups needs the last full backup plus every incremental backup made since, which takes longer and is more complex.
  • A weekly full backup with nightly incremental backups can be suitable for the company when the reason is explained using the properties of the two types.

Where and how often backups should be made

  • Backups should be kept on a separate device and, ideally, at a different location, so that a fire or theft in the office cannot destroy the computer and the backups together.
  • Backups should be made regularly, for example every evening, so that at most one day's design work would be lost.
  • Cloud storage can hold copies off-site automatically, without the owner taking a disk home.
  • An external hard disk or USB flash drive can be used as the backup medium, with a copy kept away from the office.

How the backups would be used if the hard disk failed again

  • If the hard disk fails again, the backup software is used to restore the latest full backup and any later incremental backups onto a replacement disk.
  • The restored project files allow the company to carry on working and meet its clients' deadlines.
  • The backups should be tested by restoring a file so that the company knows the backup is usable before it is needed.
  • Backup software does not repair the failed hard disk itself, so a replacement disk is still needed.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Level 3 requires all three bullets to be developed and applied, including both types of backup (or a justified combination) and a restoration sequence; a response that describes only a full backup cannot reach Level 3.

An answer that explains only one type of backup with at most a brief location or frequency point and no developed restoration is Level 1 (1–2 marks). Credit one off-site point only: cloud storage, an external disk kept elsewhere and 'a different location' are the same point. Do not accept that backup software repairs a failed hard disk or recovers files that were never backed up; an answer that only makes this claim is Level 0. An unsupported weekly-full/nightly-incremental recommendation is not credited.

Example answers and how they were marked
Full marks6/6

The company should make a full backup once a week and incremental backups every evening. A full backup copies every project file, so the whole set is held in one place, but it takes a long time and a lot of space. An incremental backup copies only the files that have changed since the last backup, so it is quick enough to run each night. The backups should be copied to an external hard disk that the owner takes home, or uploaded to cloud storage, so that a fire or a theft cannot destroy the computer and the backups together. Backing up every evening means that at most one day's design work would be lost. If the hard disk fails again, the backup software is used to restore the latest full backup and then each incremental backup onto a new disk, so the company can carry on meeting its clients' deadlines.

Why: Level 3: full and incremental backups are explained and applied to a weekly and nightly schedule (AO1); off-site storage and the restore sequence onto a replacement disk are developed and clearly tied to the hard disk failure (AO2).

Some marks2/6

The company should back up its files to an external hard disk. A full backup copies all of the files, so the project files can be restored if the hard disk fails again. The backup should be kept in a different room in case there is a fire.

Why: Level 1: names a full backup and briefly links it to restoring files, and gives a weak location point, but there is no incremental backup, frequency or developed restore sequence, so the points remain basic and independent.

No marks0/6

Backup software repairs the hard disk when it fails, so the company will not lose anything and can open the files again.

Why: Level 0: the only claim is that backup software repairs the failed hard disk and prevents all loss, which the mark scheme does not accept; no valid type, location, frequency or restoration point is made.

Questions by topic

5.3 Cybersecurity

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.