Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

5 questions · 8 marks

Pick again
Print
1Multiple choice1 markPrimary Memory Swap Remove

RAM is the main memory of a computer.

Identify the effect on the contents of RAM when the computer is switched off.

[1 mark]
  • AThey are lost
  • BThey are stored permanently
  • CThey are saved to secondary storage
  • DThey are written to ROM
Mark scheme
  • A They are lost (1)
  • The only correct answer is A. The correct answer is They are lost
  • B is not correct because RAM is volatile and its contents are lost when the power is switched off, so they are not stored permanently
  • C is not correct because RAM is volatile and its contents are lost when the power is switched off, so they are not saved to secondary storage
  • D is not correct because ROM is read-only memory that holds the start-up instructions, so the contents of RAM are not written to it
Example answers and how they were marked
Full marks1/1

A They are lost

Why: Selected the correct option. RAM is volatile, so its contents are lost when the power is switched off (1).

No marks0/1

C They are saved to secondary storage

Why: Near miss: thinks RAM contents are automatically saved, but RAM is volatile and its contents are not saved to secondary storage (0).

No marks0/1

B They are stored permanently

Why: Misconception: thinks RAM is non-volatile and keeps data permanently, but RAM is volatile and loses its contents when the power is switched off (0).

2Multiple choice1 markSecondary Memory Swap Remove

A company stores films on optical media.

Identify the optical storage medium that can store the most data.

[1 mark]
  • ABlu-ray Disc
  • BCD
  • CDVD
  • DMagnetic tape
Mark scheme
  • A Blu-ray Disc (1)
  • The only correct answer is A. The correct answer is Blu-ray Disc.
  • B is not correct because a CD stores less data than a Blu-ray Disc, up to about 700 MB
  • C is not correct because a DVD stores less data than a Blu-ray Disc, up to about 4.7 GB (single-layer) or 8.4 GB (dual-layer)
  • D is not correct because magnetic tape is not an optical storage medium
Example answers and how they were marked
Full marks1/1

A Blu-ray Disc

Why: Correct option (1): a Blu-ray Disc has the greatest capacity of the optical media.

No marks0/1

C DVD

Why: Near miss scoring 0: a DVD is optical but stores less than a Blu-ray Disc (mark scheme line C). Only A is credited.

No marks0/1

D Magnetic tape

Why: Misconception scoring 0: candidates pick tape for its large capacity but magnetic tape is not an optical storage medium (mark scheme line D).

3Short recall2 marksEmbedded Systems Swap Remove

A digital camera contains an embedded system.

Give two functions that the embedded system performs in the digital camera.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Focus the lens/autofocus (1)
  • Control the shutter (speed) (1)
  • Control the flash/decide when the flash is needed (1)
  • Measure the light level to set the exposure/the aperture (1)
  • Stabilise the lens/image stabilisation (1)
  • Zoom the lens in and out (1)
  • Detect a face/smile (1)

Do not accept 'take a photograph'/'take a picture'/'capture an image', as taking photographs is the function of the camera, which is given in the question.

Do not accept 'press the button' as this is an action of the user, not a function performed by the embedded system.

Do not accept vague answers such as 'use the camera', 'turn the camera on and off' or 'make the camera work', which do not name a function that the embedded system performs.

Example answers and how they were marked
Full marks2/2

It focuses the lens and decides when the flash should fire.

Why: Focus the lens (1) and control the flash (1).

Some marks1/2

It controls the zoom and takes a picture when the button is pressed.

Why: Zoom the lens credited (1); 'takes a picture' is not accepted because taking photographs is the function of the camera, which is given in the question, and 'press the button' is the user's action, not a function of the embedded system.

No marks0/2

It takes a picture when the button is pressed and it makes the camera work.

Why: No mark: 'takes a picture' repeats the camera's function given in the question, 'press the button' is an action of the user, and 'makes the camera work' is too vague to name a function.

4Describe2 marksStored Program Computers Swap Remove

The CPU contains an arithmetic logic unit (ALU).

Describe the purpose of the arithmetic logic unit (ALU).

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Carries out arithmetic operations/calculations, such as addition or subtraction (1) so that the result can be stored in a register (1)
  • Carries out logical operations, such as comparing two data items (1) to see which one is greater/larger (1)
  • Compares two data items (1) to decide whether a condition is true / which path a program takes next (1)

Allow the result of an arithmetic or logical operation being held/stored in a register, but only where the operation is named.

Do not accept answers that say the ALU stores data or results without naming an operation (registers/main memory store data).

Do not accept answers about controlling components, decoding instructions or timing (that is the control unit or the clock).

Do not award credit for 'it processes data' on its own; an arithmetic or a logical operation must be named.

An example on its own, e.g. 'it adds two numbers', does not earn a second mark; the second mark needs a linked development.

Example answers and how they were marked
Full marks2/2

The ALU carries out arithmetic operations such as addition and subtraction, and the result of the calculation is stored in a register.

Why: Linked point (1) for arithmetic operations with an example, and development (1) for the result being stored in a register.

Some marks1/2

It does all the calculations in the CPU, for example adding two numbers together.

Why: Point (1) for arithmetic operations/calculations named with an example; no linked development, so the second mark is not earned.

No marks0/2

It stores the results of calculations so that they can be used by the CPU later.

Why: Storing results with no arithmetic or logical operation named, which the 'Do not accept' line rules out, so no mark is earned.

5Describe2 marksStored Program Computers Swap Remove

A computer is based on the von Neumann stored program concept.

Describe how the CPU uses main memory (RAM) during the fetch-decode-execute cycle.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • The program's instructions (and the data it uses) are held in main memory/RAM (1) so the CPU fetches both the instructions and the data from that one memory (1)
  • The CPU fetches the next instruction from main memory/RAM (1) using the address of the memory location that holds it (1)
  • The CPU reads/fetches data from main memory/RAM (1) when an instruction needs it and writes the result back to main memory/RAM (1)
  • The program's instructions are held in main memory/RAM while the program runs (1) and the CPU fetches them one at a time/one after another to be decoded and executed (1)

Allow 'memory' for main memory/RAM.

Allow 'gets' for fetches/reads.

For both marks, the development must say what the CPU does with the contents of main memory (fetches/reads/writes), not just that main memory is used.

Do not accept answers about the program being stored in secondary storage, such as on a hard drive, or about it being loaded from there.

Do not accept benefits such as the computer running faster or being easier for the user.

Do not accept naming CPU components (control unit, arithmetic logic unit, registers) or buses on their own, without saying what is stored or fetched.

Do not accept 'the computer stores data' on its own, without a link to the instructions of a program.

Example answers and how they were marked
Full marks2/2

The program's instructions and the data it uses are both held in the same main memory (RAM), so the CPU can fetch the instructions and the data it needs from that one memory.

Why: Linked point (1) that instructions and data are stored together in main memory, with the development (1) that the CPU fetches both from the same memory.

Some marks1/2

The CPU fetches the instructions from main memory so that they are processed more quickly.

Why: The first point earns (1) for the CPU fetching instructions from main memory. The second statement is a benefit (speed), which the 'Do not accept benefits' line rules out, so it earns nothing.

No marks0/2

The control unit decodes each instruction and the ALU carries out the calculations.

Why: Both statements name CPU components without saying what is stored, fetched or written, which the mark scheme tells examiners not to accept, so neither earns a mark.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 71
Data Protection Act 17 questions Impact of AI 18 questions Intellectual Property 18 questions Software Licences 18 questions

5.3 Cybersecurity

Build a paper on this topic 36
Malware 18 questions Social Engineering 18 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.