Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 11 marks

Pick again
Print
1Multiple choice1 markPrimary Memory Swap Remove

RAM is the main memory of a computer.

Identify the effect on the contents of RAM when the computer is switched off.

[1 mark]
  • AThey are lost
  • BThey are stored permanently
  • CThey are saved to secondary storage
  • DThey are written to ROM
Mark scheme
  • A They are lost (1)
  • The only correct answer is A. The correct answer is They are lost
  • B is not correct because RAM is volatile and its contents are lost when the power is switched off, so they are not stored permanently
  • C is not correct because RAM is volatile and its contents are lost when the power is switched off, so they are not saved to secondary storage
  • D is not correct because ROM is read-only memory that holds the start-up instructions, so the contents of RAM are not written to it
Example answers and how they were marked
Full marks1/1

A They are lost

Why: Selected the correct option. RAM is volatile, so its contents are lost when the power is switched off (1).

No marks0/1

C They are saved to secondary storage

Why: Near miss: thinks RAM contents are automatically saved, but RAM is volatile and its contents are not saved to secondary storage (0).

No marks0/1

B They are stored permanently

Why: Misconception: thinks RAM is non-volatile and keeps data permanently, but RAM is volatile and loses its contents when the power is switched off (0).

2Short recall2 marksPrimary Memory Swap Remove

A computer is designed using the von Neumann stored program concept.

Define the term stored program concept.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • The program instructions and data are stored together in main memory/RAM (1)
  • The same memory is used for both instructions and data (1)
  • The instructions are fetched from main memory and executed by the CPU (1)
  • The instructions are fetched and executed one at a time / in sequence (1)
  • The program can be changed/replaced by loading new instructions into memory, without changing the hardware (1)

Do not accept the program is stored in secondary storage / on the hard disk.

Do not accept the program is stored in the CPU / in registers.

Example answers and how they were marked
Full marks2/2

The program instructions and the data are stored together in main memory, and the CPU fetches the instructions one at a time and executes them.

Why: Creditworthy point that instructions and data are stored in the same main memory (1) and the linked point that the CPU fetches and executes them from memory (1).

Some marks1/2

The program is held in the main memory (RAM) so that the computer can run it.

Why: Earns the point that the program instructions are stored in main memory (1), but does not say that the CPU fetches and executes them, so the second mark is not earned.

No marks0/2

The program is stored on the hard disk and loaded into the CPU when it is run.

Why: Both parts are misconceptions named in the Do not accept lines: the stored program concept keeps the instructions in main memory, not on secondary storage or in the CPU.

3Explain2 marksFetch Decode Execute Cycle Swap Remove

The CPU carries out the fetch-decode-execute cycle.

Explain one reason why the address bus is used in the fetch stage of the fetch-decode-execute cycle.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • The address bus carries the address of the next instruction (1) so the CPU can locate/fetch it from main memory/RAM (1)
  • The address bus carries the address of the memory location to be read (1) so the instruction/data stored there can be located/accessed (1)
  • The CPU needs to know where the next instruction is stored (1) so the address bus sends the address to main memory/RAM (1)

For both marks, the expansion must follow/associate with the statement.

Allow 'from the program counter/PC' as part of the point for one mark, e.g. the address bus carries the address from the program counter (1), but the second mark needs the destination or purpose (e.g. to locate/fetch the instruction in main memory/RAM).

Do not award the second mark for naming the program counter/PC alone.

Do not accept answers that say the address bus carries data/instructions from main memory to the CPU, as these travel on the data bus.

Do not accept answers that say the address bus stores the address.

Do not allow an answer that only restates that the address bus carries addresses without saying which address or why it is needed.

Example answers and how they were marked
Full marks2/2

The address bus carries the address of the next instruction from the program counter to main memory, so that the CPU can locate the instruction that is to be fetched.

Why: Linked point (1) and reason (1).

Some marks1/2

The address bus carries the address of the next instruction from the program counter.

Why: Point only (1); the second mark is not awarded because the destination/purpose of locating or fetching the instruction is missing.

No marks0/2

It carries the instruction from main memory back to the CPU so that it can be decoded.

Why: Misconception: instructions travel on the data bus, which the mark scheme's Do not accept line covers.

4Discuss6 marksEmbedded Systems Swap Remove

A supermarket is replacing its staffed checkouts with self-service checkouts. Each checkout has a touchscreen, a barcode scanner and weighing scales. The supermarket wants the checkouts to be reliable and quick to respond.

Discuss why the supermarket should use embedded systems in its self-service checkouts rather than general-purpose computers.

Your answer should consider:

  • the characteristics of embedded systems
  • what self-service checkouts use embedded systems for
  • how embedded systems compare with general-purpose computers

You do not need to consider the cost of the materials used in the checkout.

[6 marks]
Mark scheme

Indicative content

Characteristics of embedded systems

  • An embedded system performs a single, dedicated task, so each self-service checkout is built only to scan, weigh and price items and cannot be used for any other job.
  • An embedded system has limited processing resources and storage, which is enough for the checkout to scan barcodes, weigh items and display prices.
  • An embedded system normally has a simple operating system held in ROM, so a checkout is less likely to fail while a customer is using it.
  • Embedded systems have low power consumption, so a row of checkouts can be left running all day without using much electricity.
  • Embedded systems are small and low cost per unit, so one can be built into each checkout unit and the supermarket can afford one at every till.
  • An embedded system has a limited user interface, so the checkout only shows its own screens to the customer.
  • The firmware of an embedded system is not normally changed by the customer, although a technician can update it when the supermarket changes the checkout's software.

Uses of embedded systems in the checkout

  • The checkout uses an embedded system to read the barcode scanner, so the correct price for each item is found quickly.
  • The checkout uses an embedded system to read the weighing scales, so the weight of the items can be checked against the product that was scanned.
  • The checkout uses an embedded system to control the touchscreen that shows the customer what to do and how much to pay.
  • The checkout uses an embedded system to respond quickly to each scan, because it only carries out the checkout's own tasks, which keeps the queues moving.
  • The checkout uses an embedded system so that it keeps working for long periods without being restarted, which means customers can use it without a member of staff.

Comparison with general-purpose computers

  • A general-purpose computer can run many different programs, whereas the checkout's embedded system runs one dedicated program, so it cannot be used for other jobs.
  • A general-purpose computer loads a full operating system when it starts and has other software running, so it can slow down or need restarting, whereas the checkout is not slowed down by other programs.
  • A general-purpose computer has far more processing power and memory than the checkout needs, so using one would be more expensive and would take up more space than an embedded system.
  • A general-purpose computer is designed for users to install new software, but the checkout's embedded system runs fixed firmware, so customers cannot change what the checkout does.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Level 3 responses must consider both the characteristics of embedded systems and what the checkout uses them for, and must make a comparison with a general-purpose computer. Answers that only list characteristics or checkout tasks without linking them to the checkout are limited to Level 1.

Do not accept claims that embedded systems are faster than general-purpose computers or that they can run many different programs, as embedded systems have limited processing resources and carry out a single, dedicated task.

Example answers and how they were marked
Full marks6/6

An embedded system performs a single, dedicated task, so each self-service checkout is built only to scan items, weigh them and show prices. This suits the supermarket because the checkout does one job well instead of being used for anything else. The checkout uses its embedded system to read the barcode scanner, so the correct price is found quickly, and to read the weighing scales, so the weight of the items can be checked against the product that was scanned. It also controls the touchscreen that shows the customer what to do.

Embedded systems have limited processing resources and storage, which is more than enough for these tasks. Because they use a simple operating system held in ROM, they are less likely to fail while a customer is using them, so customers do not need a member of staff. They also have low power consumption, so a row of checkouts can run all day without using much electricity, and they are small and low cost per unit, so the supermarket can afford one at every till.

A general-purpose computer, by contrast, runs many programs and loads a full operating system, so it can slow down or need restarting and it is more expensive and bigger than the checkout needs. The embedded system runs fixed firmware, so customers cannot install software on the checkout, which keeps it reliable and quick to respond, and this is why it meets the supermarket's requirements better.

Why: Comprehensive understanding with sustained lines of reasoning: characteristics (single dedicated task, limited resources, simple operating system in ROM, low power, small and low cost) and uses (scanner, scales, touchscreen) are all applied to the checkout, and each is compared with a general-purpose computer. Meets the Level 3 guidance for a 6-mark answer.

Some marks2/6

Embedded systems are small and cheap. The checkout needs to scan items and weigh them. An embedded system can do this. It is reliable. A general-purpose computer could also do it but might crash more.

Why: Basic, independent points with little linkage or application: one characteristic (small and cheap), one use (scanning and weighing) and a brief comparison (a general-purpose computer might crash more). No line of reasoning is developed, so it is Level 1, top of the band, not Level 2.

No marks0/6

Embedded systems are better than normal computers because they are faster and can run lots of different programs. The checkout needs to be fast so it should use an embedded system.

Why: Level 0. Both claims are misconceptions that the mark scheme tells examiners not to accept (embedded systems have limited processing resources and run a single, dedicated program), and the last sentence only repeats the stem's requirement for quick responses, so there is no rewardable content.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.