Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 8 marks

Pick again
Print
1Multiple choice1 markPrimary Memory Swap Remove

RAM is the main memory of a computer.

Identify the effect on the contents of RAM when the computer is switched off.

[1 mark]
  • AThey are lost
  • BThey are stored permanently
  • CThey are saved to secondary storage
  • DThey are written to ROM
Mark scheme
  • A They are lost (1)
  • The only correct answer is A. The correct answer is They are lost
  • B is not correct because RAM is volatile and its contents are lost when the power is switched off, so they are not stored permanently
  • C is not correct because RAM is volatile and its contents are lost when the power is switched off, so they are not saved to secondary storage
  • D is not correct because ROM is read-only memory that holds the start-up instructions, so the contents of RAM are not written to it
Example answers and how they were marked
Full marks1/1

A They are lost

Why: Selected the correct option. RAM is volatile, so its contents are lost when the power is switched off (1).

No marks0/1

C They are saved to secondary storage

Why: Near miss: thinks RAM contents are automatically saved, but RAM is volatile and its contents are not saved to secondary storage (0).

No marks0/1

B They are stored permanently

Why: Misconception: thinks RAM is non-volatile and keeps data permanently, but RAM is volatile and loses its contents when the power is switched off (0).

2Short recall3 marksFetch Decode Execute Cycle Swap Remove

The fetch-decode-execute cycle is used by the CPU.

State three things that happen during the fetch stage.

[3 marks]
Mark scheme

Award one mark for any of the following up to a maximum of three marks:

  • The address (of the next instruction) is sent from the CPU to main memory / placed on the address bus (1)
  • The (next) instruction is fetched/read from main memory (RAM) (1)
  • The instruction is brought/copied into the CPU / received into the MDR (1)
  • The program counter (PC) is incremented/updated to hold the address of the next instruction (1)

Allow 'the PC/MAR is placed on the address bus' for the address being sent to main memory.

Allow 'the MDR receives the instruction' for the instruction being brought into the CPU.

Do not award a second mark for the instruction being fetched from main memory and the instruction being brought into the CPU; these are the same point.

Do not award 'the instruction is transferred along the data bus' on its own; this is the same point as the instruction being fetched from main memory.

Do not accept answers about decoding the instruction, e.g. 'the instruction is fetched from RAM and decoded', as decoding happens in the decode stage.

Do not accept answers about the execute stage, e.g. 'the ALU carries out the calculation' or 'the result of a calculation is stored in a register', as these happen in the execute stage.

Example answers and how they were marked
Full marks3/3

The address of the next instruction is sent to main memory, the instruction is fetched from RAM, and the program counter is incremented.

Why: Address sent to main memory (1), instruction fetched from RAM (1) and program counter incremented (1).

Some marks1/3

The instruction is fetched from main memory and then decoded.

Why: Fetching the instruction from main memory (1); decoding happens in the decode stage, so it is not creditworthy in the fetch stage.

No marks0/3

The ALU carries out the calculation and the result is stored in a register.

Why: The ALU carrying out a calculation and storing a result happen in the execute stage, not the fetch stage, so no point is creditworthy.

3Short recall2 marksEmbedded Systems Swap Remove

An embedded system is a computer system built into another device to perform a specific function.

Give two examples of devices that contain an embedded system.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Microwave (oven) (1)
  • Washing machine (1)
  • Dishwasher (1)
  • Digital camera (1)
  • Satellite navigation/satnav system (1)
  • Traffic light(s) (1)
  • Central heating controller/thermostat (1)
  • Digital watch/fitness tracker (1)
  • Vending machine (1)
  • Car (as it contains embedded systems) (1)

Allow any other device that contains an embedded system.

Do not accept general purpose devices such as a laptop, desktop computer, tablet or smartphone (these can run many different programs).

Example answers and how they were marked
Full marks2/2

A microwave oven and a washing machine.

Why: Two creditworthy devices, a microwave oven (1) and a washing machine (1).

Some marks1/2

A dishwasher and a laptop computer.

Why: Dishwasher credited (1); laptop is a general purpose device, so not accepted.

No marks0/2

A desktop computer and a smartphone.

Why: Both are general purpose devices, so neither earns a mark.

4Describe2 marksStored Program Computers Swap Remove

The CPU contains an arithmetic logic unit (ALU).

Describe the purpose of the arithmetic logic unit (ALU).

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Carries out arithmetic operations/calculations, such as addition or subtraction (1) so that the result can be stored in a register (1)
  • Carries out logical operations, such as comparing two data items (1) to see which one is greater/larger (1)
  • Compares two data items (1) to decide whether a condition is true / which path a program takes next (1)

Allow the result of an arithmetic or logical operation being held/stored in a register, but only where the operation is named.

Do not accept answers that say the ALU stores data or results without naming an operation (registers/main memory store data).

Do not accept answers about controlling components, decoding instructions or timing (that is the control unit or the clock).

Do not award credit for 'it processes data' on its own; an arithmetic or a logical operation must be named.

An example on its own, e.g. 'it adds two numbers', does not earn a second mark; the second mark needs a linked development.

Example answers and how they were marked
Full marks2/2

The ALU carries out arithmetic operations such as addition and subtraction, and the result of the calculation is stored in a register.

Why: Linked point (1) for arithmetic operations with an example, and development (1) for the result being stored in a register.

Some marks1/2

It does all the calculations in the CPU, for example adding two numbers together.

Why: Point (1) for arithmetic operations/calculations named with an example; no linked development, so the second mark is not earned.

No marks0/2

It stores the results of calculations so that they can be used by the CPU later.

Why: Storing results with no arithmetic or logical operation named, which the 'Do not accept' line rules out, so no mark is earned.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 71
Data Protection Act 17 questions Impact of AI 18 questions Intellectual Property 18 questions Software Licences 18 questions

5.3 Cybersecurity

Build a paper on this topic 36
Malware 18 questions Social Engineering 18 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.