Edexcel GCSE Computer Science (1CP2) Exam Questions

• A They are lost (1)
• The only correct answer is A. The correct answer is They are lost
• B is not correct because RAM is volatile and its contents are lost when the power is switched off, so they are not stored permanently
• C is not correct because RAM is volatile and its contents are lost when the power is switched off, so they are not saved to secondary storage
• D is not correct because ROM is read-only memory that holds the start-up instructions, so the contents of RAM are not written to it

Award up to two marks for a linked description such as:

• Carries the address of a memory location (1) that the CPU needs to access/read from or write to (1)
• Transfers the address of the next instruction (1) to main memory so it can be fetched (1)
• Carries the address of data/instructions (1) from the CPU to main memory (1) so the correct location is found
• Is used by the CPU to specify/identify a location in memory (1) by carrying its address along the bus (1)

Award one mark for a correct point even if not developed, e.g. 'it carries the address of a memory location'.

Accept 'the address of the next instruction' without mentioning the program counter, if it is linked to being sent to main memory/to be fetched.

Do not accept responses about carrying data or control signals.

Do not accept responses that say the address bus sends/transfers instructions or data without referring to addresses.

Do not accept vague responses such as 'it carries addresses' without saying what the address is for.

Award up to two marks for a linked description such as:

• It controls the motors/rotors (1) so that the drone can take off, hover, turn and land (1)
• It keeps the drone stable/level automatically (1) by taking readings from a sensor (accelerometer/gyroscope/GPS) (1)
• It receives signals from the remote control (1) and changes the speed of the motors to steer the drone (1)
• It monitors the battery level (1) and brings the drone back to the ground before the battery runs out (1)

The development must relate to the function given in the point.

Accept a named function that the embedded system controls, e.g. 'it keeps the drone level', as the first mark (1).

Award the second mark only when the development gives a specific outcome or detail of that function, e.g. 'so that the drone can take off, hover, turn and land' or 'by changing the motor speeds to keep it level'.

Do not award the second mark for a generic outcome such as 'so it works', 'so it can fly' or 'so the drone moves'.

A bare 'it controls the motors so it can fly' therefore earns the first mark only.

Allow any other specific function of a drone that is carried out by the embedded system.

Do not accept 'it flies the drone' / 'it is the drone's brain' / 'it makes the drone work' without a named function being controlled.

Do not accept answers that describe the user or the remote control flying the drone with no function carried out by the embedded system.

Indicative content

Stored program concept

• The stored program concept means that the program instructions and the data the program is using are both held in the same main memory (RAM).
• The CPU fetches an instruction from main memory, the control unit decodes it and the instruction is executed, and this is repeated in the fetch-decode-execute cycle.
• The program is stored as a set of binary instructions, so a different program can be run on the college's new computers by loading different instructions into RAM rather than by changing any hardware.
• Instructions are usually carried out one at a time, in the order in which they are stored, which is suitable for the computers in the IT suite that each run one piece of software at a time.

Main memory (RAM)

• Main memory (RAM) holds the instructions and the data that the CPU is currently using.
• RAM is directly accessible by the CPU, so the required instruction or item of data can be fetched quickly during the fetch stage of the cycle.
• RAM can be read from and written to while a program is running, so the results produced by the students' work can be stored back into memory.
• RAM is volatile, so its contents are lost when the power is turned off, and the college's computers will have empty RAM each time they are started.

CPU components

• The control unit decodes each instruction and coordinates the timing and control of the other parts of the CPU, so it directs the fetch-decode-execute cycle.
• The arithmetic logic unit (ALU) carries out arithmetic operations and logical comparisons on the data, for example working out a student's total mark in a spreadsheet.
• Registers are small, fast storage locations inside the CPU that hold the address of the next instruction, the instruction being decoded and the data being worked on.
• The clock sends a regular signal that synchronises the actions of the CPU, so each step of the cycle is carried out in time with the clock.

Buses

• The address bus is one way, from the CPU to main memory, and carries the address of the memory location that the CPU wants to read from or write to.
• The data bus carries the instruction or the data between the CPU and main memory, so it is used to bring an instruction to the CPU in the fetch stage.
• The control bus carries control signals such as read and write, so the CPU can tell main memory whether it is reading an instruction or writing data.

Levels

• Level 0 (0 marks): No rewardable content.
• Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
• Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
• Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

• Level 3 responses must cover the role of main memory (RAM) and the role of the CPU components or the buses during the fetch-decode-execute cycle, as well as the stored program concept.
• Do not accept RAM described as being inside the CPU, or as non-volatile, or any point about how clock speed affects performance, because the question excludes it.