Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 631 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

5 questions · 10 marks

Pick again
Print
1Short recall2 marksPurpose & Function of Operating Systems Swap Remove

A computer can run more than one process at a time.

Give two tasks carried out by the process management function of an operating system.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Deciding which process runs next on the CPU/scheduling processes (1)
  • Allocating processor/CPU time to processes/allowing multitasking (1)
  • Managing the process life-cycle/process states (ready, running, blocked) (1)
  • Handling interrupts so a running process is suspended and another can run (1)
  • Stopping/terminating a process when it has finished (1)

Do not accept 'managing processes' on its own.

Do not accept 'handling interrupts' on its own.

Do not award two marks for the same task expressed twice, e.g. 'deciding which process runs next' and 'scheduling processes', or 'allocating CPU time' and 'giving each process a share of processor time'.

Do not accept 'managing memory/memory management', 'managing files/file management' or 'managing devices/peripherals' (these are other functions of an operating system).

Example answers and how they were marked
Full marks2/2

Deciding which process runs next on the CPU and stopping a process when it has finished.

Why: Scheduling a process (1) and terminating a process (1) are two different named tasks.

Some marks1/2

Deciding which process runs next and scheduling processes.

Why: Both points are the same task expressed twice, so only one mark is awarded under the guidance.

No marks0/2

Managing processes and managing files.

Why: 'Managing processes' repeats the question and earns nothing; 'managing files' is file management, not process management, so it is not credited.

2Short recall2 marksSoftware Basics Swap Remove

Every computer system needs an operating system.

State two functions of an operating system.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • File management (1)
  • Process management (1)
  • Peripheral management (1)
  • User management (1)

Allow 'managing files', 'managing processes', 'managing peripherals', 'managing users'.

Do not accept examples of utility software, such as anti-malware, backup or defragmentation, as these are not functions of the operating system.

Do not accept 'runs/loads the programs' on its own.

Example answers and how they were marked
Full marks2/2

File management and process management.

Why: Two creditworthy functions from the list, one mark each (1) + (1).

Some marks1/2

It does file management and it loads the programs that the user wants to run.

Why: File management earns one mark (1); 'loads the programs' is not one of the listed functions, so no second mark.

No marks0/2

Anti-malware and backup.

Why: These are examples of utility software, not functions of the operating system, so no mark is awarded.

3Short recall2 marksUser Management Swap Remove

A computer can be shared by more than one user.

Define the term user management.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Manages user accounts/profiles/logins (1)
  • Authenticates users when they log in (through passwords/biometrics) (1)
  • Controls what each user is allowed to access (access rights/permissions) (1)
  • Sets which files/folders/resources a user can use (1)
  • Gives different levels of access to different users (e.g. administrator/standard user) (1)

Allow 'decides which users can use the computer' for the manage user accounts/logins mark.

Allow references to access to files/folders/resources for the access rights mark, as this is part of user management, not file management.

Do not accept 'manages users' on its own.

Do not accept 'controls user access' on its own, as it is unclear whether this means logging in or access rights.

Do not accept 'manages files' or 'manages peripherals' (these are other operating system functions).

Example answers and how they were marked
Full marks2/2

The operating system manages user accounts and logins, and sets access rights so each user can only use certain files and resources.

Why: Manages user accounts/logins (1) and controls what each user is allowed to access through access rights (1).

Some marks1/2

It manages the users who can log in to the computer.

Why: Manages user logins (1); no creditworthy point about access rights/permissions.

No marks0/2

It manages the files and peripherals for different users.

Why: File management and peripheral management are other operating system functions, so neither mark is earned.

4Describe2 marksMemory Management Swap Remove

A program is stored on secondary storage before it is run.

Describe how the operating system manages memory when a program is started.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • The program (and its data) is copied/loaded from secondary storage into main memory/RAM (1) so that the CPU can fetch/execute its instructions (1)
  • An area of main memory is allocated/reserved for the program (1) that is large enough to hold the program and its data (1)
  • The operating system checks that there is enough free main memory (1) before the program can be started/loaded, otherwise it cannot run/an error is reported (1)
  • The operating system keeps a record of the memory addresses used by the program (1) so that its instructions and data can be found when it runs (1)

Allow 'loaded into RAM', 'stored in memory' and 'put into main memory' as equivalent to copied into main memory.

A single statement that the program is loaded/stored in main memory, with no linked development, can be given one mark only.

Do not accept descriptions of the CPU fetching/executing instructions that do not refer to the operating system loading or allocating memory.

Do not accept responses about virtual memory (moving processes to secondary storage) or about which process runs next on the CPU.

Do not accept the program being run from secondary storage/hard disk.

Example answers and how they were marked
Full marks2/2

The operating system copies the program and its data from secondary storage into main memory so that the CPU can fetch and execute its instructions.

Why: Copying the program and data into main memory (1) linked to the CPU fetching/executing instructions (1).

Some marks1/2

The operating system loads the program into main memory.

Why: The program is copied/loaded into main memory (1), but there is no linked development of how or what this leads to, so only one mark is given.

No marks0/2

The CPU fetches the program's instructions from main memory and executes them one at a time.

Why: This describes the fetch-decode-execute cycle, not the operating system loading or allocating memory, which is the Do not accept line; no creditworthy point is made.

5Explain2 marksMemory Management Swap Remove

When a program closes, the operating system frees the main memory it was using.

Explain one reason why the operating system frees main memory when a program closes.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • The memory can be reused/allocated to another program (1) so other programs have enough main memory to run (1)
  • Freeing the memory stops main memory becoming full (1) so the computer can load/run new programs (1)
  • The closed program's data is no longer needed (1) so keeping it would waste main memory (1)
  • The operating system can give the freed memory to a program that needs more (1) so that program can continue to run (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'to make the computer faster' on its own without saying how freeing memory helps.

Do not accept 'to delete the program' or 'to save the program' because closing a program does not remove it from secondary storage.

Example answers and how they were marked
Full marks2/2

The memory can be reused by another program, so other programs have enough main memory to run.

Why: Linked point (1) about reusing the memory and reason (1) that other programs then have enough memory.

Some marks1/2

So that the memory is free.

Why: Gives the point (1) but does not give a linked reason saying what the free memory is used for.

No marks0/2

So the program is deleted from the computer.

Why: No creditworthy point; closing a program does not delete it from secondary storage.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 45
Data Protection Act 17 questions Impact of AI 16 questions Intellectual Property 12 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.