Edexcel GCSE Computer Science (1CP2) Exam Questions

• D Time slice (1)
• The only correct answer is D. The correct answer is time slice.
• A is not correct because a process is a program that is being run
• B is not correct because round robin is a scheduling method that takes turns, not the period of CPU time itself
• C is not correct because a scheduler decides which process runs next

Award one mark for any of the following up to a maximum of one mark:

• Breaks messages/data into packets (1)
• Reassembles packets (at the destination) (1)
• Detects errors (1)
• Resends lost/missing packets/requests retransmission of lost packets (1)
• Creates/establishes a connection between two computers/hosts/sets up a connection before data is sent (1)

Do not accept routing packets or using IP addresses, which is the role of IP.

Do not accept encrypting data or providing security.

Do not accept vague answers such as 'transmits data' or 'sends data' without saying how TCP does this.

Award up to two marks for a linked description such as:

• It controls the motors/rotors (1) so that the drone can take off, hover, turn and land (1)
• It keeps the drone stable/level automatically (1) by taking readings from a sensor (accelerometer/gyroscope/GPS) (1)
• It receives signals from the remote control (1) and changes the speed of the motors to steer the drone (1)
• It monitors the battery level (1) and brings the drone back to the ground before the battery runs out (1)

The development must relate to the function given in the point.

Accept a named function that the embedded system controls, e.g. 'it keeps the drone level', as the first mark (1).

Award the second mark only when the development gives a specific outcome or detail of that function, e.g. 'so that the drone can take off, hover, turn and land' or 'by changing the motor speeds to keep it level'.

Do not award the second mark for a generic outcome such as 'so it works', 'so it can fly' or 'so the drone moves'.

A bare 'it controls the motors so it can fly' therefore earns the first mark only.

Allow any other specific function of a drone that is carried out by the embedded system.

Do not accept 'it flies the drone' / 'it is the drone's brain' / 'it makes the drone work' without a named function being controlled.

Do not accept answers that describe the user or the remote control flying the drone with no function carried out by the embedded system.

Award up to two marks for a linked explanation such as:

• Only a limited number of different amplitude values can be stored (1) so each sample is rounded to the nearest available value and the digital wave does not match the analogue wave exactly (1)
• The wave is continuous but only a limited set of values can be represented (1) so amplitude detail/accuracy is lost (1)
• Quiet and loud parts of the sound may be stored as the same value (1) because there are too few values to tell them apart (1)
• The range of amplitudes that can be represented is limited (1) so the loudest/quietest parts of the sound cannot be stored accurately (1)

For both marks, the expansion must follow/associate with the statement.

Do not award marks for answers that say the sound cannot be stored or heard at all.

Do not award answers about the number of samples taken/sample rate, as the number of bits limits the amplitude values, not how often the wave is sampled.

Do not accept 'lower quality'/'less accurate'/'less detail' on its own without a link to the amplitude values that can be stored/the number of bit combinations.

Do not accept 'the file size is smaller' without a link to the accuracy or the range of values that can be stored.

Award up to two marks for a linked explanation such as:

• (Computers) are made of electronic components/switches/transistors that have two states, on/off (1) so binary's two values 0 and 1 can represent these states (1)
• Data stored as binary is more resistant to errors (1) because only two voltage levels/states need to be distinguished, so electrical noise/interference is less likely to be misread as a different value (1)
• Circuits that only need to distinguish two states are simpler/cheaper to manufacture (1) because each component only needs to hold one of two stable states (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'computers only understand 0s and 1s' as a reason on its own without saying what the two states are or why binary matches them.

Do not accept 'computers are digital' or 'that is how computers work' without expansion.

Do not accept 'binary is easier to read/write' or 'binary is easier to understand' as a reason for using binary.

Do not award the same point twice if it is repeated in different words, e.g. two answers that both say circuits/components are on or off.

Award up to two marks for a linked explanation such as:

• The programmer can control/manipulate the hardware directly (1) because low-level instructions can access registers/memory addresses/hardware features (1)
• The code can be made to work efficiently with a specific device (1) because low-level languages are processor/chipset specific, so the instructions match that hardware (1)
• The code produced is fast to execute (1) because it is optimised for the specific processor/uses few instructions (1)
• The code produced is small (1) so it fits in the limited memory/ROM available in the device (1)

For both marks, the expansion must follow/associate with the statement.

Fast execution and small code size are typical advantages of low-level languages; award them only where the linked reason relates to the device.

Do not accept 'it is easier to write/learn/understand' or 'it is faster to write' as a point or as the expansion, because low-level languages are not easier for these.

Do not accept 'it is close to the hardware' or 'it works with hardware' without expansion of what that allows the program to do.

Do not accept 'because it is low-level' as the expansion; the answer must say what the language/hardware allows.

Award up to two marks for a linked explanation such as:

• Terminators absorb the signal at the ends of the cable (1) so it is not reflected back along the bus (1)
• Terminators prevent signals reflecting/bouncing back (1) so the reflected signal does not corrupt data on the cable (1)
• Terminators absorb the signal (1) so it does not collide/interfere with data being sent by other devices (1)
• Terminators stop the signal reflecting back down the cable (1) so data can be transmitted and received without errors (1)

For both marks, the expansion must follow/associate with the statement.

Allow 'interfere'/'corrupt' only where the answer says the reflected signal mixes with/collides with data on the cable.

Do not accept 'to stop the signal' on its own, as stopping the signal is not the same as stopping it reflecting back along the cable.

Do not accept 'to terminate the cable/network', 'to end the cable' or 'to stop the cable breaking'.

Do not award responses that only repeat the stem, e.g. 'because there is a terminator at each end'.

Indicative content

Ease of learning, use and debug

• High-level language statements are written in English-like words and mathematical symbols, so the students can read the quiz game code and understand what each line does.
• The language is easier to learn than a low-level language, so students who are new to programming can start writing the quiz game quickly.
• Errors are easier to find and fix because the code is readable; for example, the students can check a line that updates a score against the rule they intended.
• The students do not need to know how the processor carries out each statement, so they can concentrate on the quiz questions and rules.

Data structures

• High-level languages provide lists or arrays, so the names and scores of all the players can be stored under one name and processed with a loop.
• A record can store a player's name and score as one item; in some languages a dictionary or class can be used instead, which keeps related data together.
• Using a data structure makes the code shorter and easier to understand than separate variables for every player's name and score.

Built-in functions and library routines

• High-level languages provide built-in functions such as print and input, so the students can display a question and read a player's answer without writing the underlying code.
• Library routines such as a random number generator can be used to choose quiz questions, saving the students time.
• String-handling routines can check or compare a player's answer, so the students do not have to write these routines themselves.
• Reusing tested routines reduces the amount of code the students write and can reduce errors in the quiz game.

Levels

• Level 0 (0 marks): No rewardable content.
• Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
• Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
• Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance: Credit only points applied to the quiz game and the students; comparison with low-level languages is not required, but a correct contrast may support a point if it is applied. Do not award generic claims such as 'high-level programs run faster', 'work on any computer' or 'students do not need to learn syntax' unless they are justified for the quiz game.

Level 3 responses must cover all three bullet areas with linked reasoning that explains why the characteristic helps the students finish the game quickly with few errors; an answer covering only two bullet areas is limited to Level 2. Do not award the idea that high-level code is already machine code or is understood directly by the processor. Accept dictionaries or classes as equivalents of records.