Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 12 marks

Pick again
Print
1Describe2 marksPeripheral Management Swap Remove

A student uses a graphics tablet connected to a computer to draw in a program.

Describe how the operating system passes input from the graphics tablet to the program.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • The operating system receives signals/data from the graphics tablet (1) and converts them into data the program can use/process (1)
  • The operating system receives data from the graphics tablet (1) and passes/forwards it to the program being used/the active program (1)
  • The tablet's device driver receives/interprets the signals/data from the tablet (1) so the operating system can pass the input to the program (1)
  • The operating system identifies the graphics tablet as the source of the input (1) so the data is sent to the correct program (1)

Accept 'signals' for 'data' throughout.

Accept reference to the device driver only where it is linked to receiving/interpreting the input (e.g. the driver receives the tablet's signals (1) so the OS can pass data to the program (1)).

Do not accept 'the operating system uses a driver' on its own, without saying what the driver does with the input.

Do not accept generic statements such as 'the operating system runs the tablet' as a description of how input is managed.

Do not accept responses that say the operating system creates/finishes the drawing, or that the tablet stores the input permanently.

Example answers and how they were marked
Full marks2/2

The operating system receives signals from the graphics tablet and passes the data to the program.

Why: Receives signals/data from the tablet (1) and passes the data to the active program (1).

Some marks1/2

The operating system receives signals from the graphics tablet.

Why: Gives the first half of a linked description (1): it receives signals, but does not say what happens to the input.

No marks0/2

The operating system uses a device driver to control the graphics tablet and stores the input.

Why: Only says the OS uses a driver to control the tablet and that input is stored; it does not describe the driver receiving/interpreting the input or the input being passed to the program, so no linked point is credited. The mark scheme rejects 'uses a driver' on its own.

2Describe2 marksUser Management Swap Remove

A computer can be used by more than one person.

Describe how an operating system uses access rights to protect each user's files.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Each user/file is given permissions/access rights (1) so other users cannot read/write/open/change that user's files (1)
  • A user may be given read-only/read access to a file (1) so they cannot edit/delete/change it (1)
  • Each file is given permissions/access rights for different users (1) so the operating system allows/refuses access depending on which user is logged in (1)
  • The operating system checks a user's permissions/access rights when a file is opened (1) so a user with read-only/read access cannot save/delete changes (1)

Do not accept responses about asking for a password/username, as this checks who the user is, not what they are allowed to do.

Do not accept 'files are protected/safe' or 'access rights protect files' without saying how access is limited (e.g. read-only access, permissions for different users).

Example answers and how they were marked
Full marks2/2

A user can be given read-only access to a file, so they can open it but cannot edit or delete it.

Why: Read-only/read access point (1) and linked development that the user cannot edit/delete the file (1).

Some marks1/2

A user can be given read-only access to a file.

Why: Read-only/read access point (1); no development saying what this prevents, such as being unable to edit/delete the file (0).

No marks0/2

The operating system asks for the password again before the file opens.

Why: Describes asking for a password, which checks who the user is, not access rights to the file; no creditworthy point.

3Explain2 marksPurpose & Function of Operating Systems Swap Remove

A school has bought a new printer for one of its computers.

Explain one reason why an operating system needs peripheral management.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • The operating system uses the printer's device driver to communicate with the printer (1) so the print job is sent as commands the printer can carry out (1)
  • The operating system holds print jobs in a queue/buffer (1) because the computer sends data faster than the printer can print it (1)
  • The operating system reports the printer's status to the user (1) so the user knows what to do when there is a problem such as the paper running out (1)
  • The operating system handles interrupts/signals from the printer (1) so a problem such as a paper jam is dealt with while other programs carry on running (1)

For both marks, the expansion must follow/associate with the statement.

Allow a point about the operating system loading/installing the device driver for a new printer (1) provided the second mark gives a reason that is not the same as the driver communication point, e.g. so the new printer can be used/controlled by the operating system (1)

Award 1 mark for stating that print jobs are held in a queue/a buffer; the second mark needs the linked reason that the printer prints more slowly than data is sent.

Do not accept restating the question, e.g. 'it manages the printer' or 'it controls the peripherals', without saying how or why.

Do not accept 'it lets the printer connect to the computer' or 'it stops the printer being damaged' without a linked reason.

Do not accept 'it makes the printer print faster' as the operating system cannot increase the printer's speed.

Example answers and how they were marked
Full marks2/2

The operating system uses the printer's device driver to send the print job so the printer receives the data as commands it can understand.

Why: Linked point (1) and reason (1): device driver used to communicate, and the job is sent as commands the printer can carry out.

Some marks1/2

It puts print jobs into a queue.

Why: Point (1) only: the queue/buffer is named, but no linked reason (that the printer prints more slowly than data is sent) is given.

No marks0/2

It makes the printer print faster.

Why: Misconception named in the 'Do not accept' line: the operating system cannot increase the printer's speed, so there is no creditworthy point.

4Discuss6 marksUtility Software Swap Remove

A small graphic design company keeps all of its project files on one desktop computer. The computer's hard disk has failed and some files have been lost. The owner has been told to use backup software.

Discuss the backup strategy the company should use.

Your answer should include:

  • the types of backup that could be used
  • where and how often backups should be made
  • how the backups would be used if the hard disk failed again.
[6 marks]
Mark scheme

Indicative content

Types of backup that could be used

  • A full backup copies all of the company's project files every time it is run, so the whole set of files is held together in one backup.
  • A full backup takes longer to make and needs more storage space than an incremental backup.
  • An incremental backup copies only the files that have changed since the previous backup, so it is quicker to run each evening.
  • Restoring from incremental backups needs the last full backup plus every incremental backup made since, which takes longer and is more complex.
  • A weekly full backup with nightly incremental backups can be suitable for the company when the reason is explained using the properties of the two types.

Where and how often backups should be made

  • Backups should be kept on a separate device and, ideally, at a different location, so that a fire or theft in the office cannot destroy the computer and the backups together.
  • Backups should be made regularly, for example every evening, so that at most one day's design work would be lost.
  • Cloud storage can hold copies off-site automatically, without the owner taking a disk home.
  • An external hard disk or USB flash drive can be used as the backup medium, with a copy kept away from the office.

How the backups would be used if the hard disk failed again

  • If the hard disk fails again, the backup software is used to restore the latest full backup and any later incremental backups onto a replacement disk.
  • The restored project files allow the company to carry on working and meet its clients' deadlines.
  • The backups should be tested by restoring a file so that the company knows the backup is usable before it is needed.
  • Backup software does not repair the failed hard disk itself, so a replacement disk is still needed.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Level 3 requires all three bullets to be developed and applied, including both types of backup (or a justified combination) and a restoration sequence; a response that describes only a full backup cannot reach Level 3.

An answer that explains only one type of backup with at most a brief location or frequency point and no developed restoration is Level 1 (1–2 marks). Credit one off-site point only: cloud storage, an external disk kept elsewhere and 'a different location' are the same point. Do not accept that backup software repairs a failed hard disk or recovers files that were never backed up; an answer that only makes this claim is Level 0. An unsupported weekly-full/nightly-incremental recommendation is not credited.

Example answers and how they were marked
Full marks6/6

The company should make a full backup once a week and incremental backups every evening. A full backup copies every project file, so the whole set is held in one place, but it takes a long time and a lot of space. An incremental backup copies only the files that have changed since the last backup, so it is quick enough to run each night. The backups should be copied to an external hard disk that the owner takes home, or uploaded to cloud storage, so that a fire or a theft cannot destroy the computer and the backups together. Backing up every evening means that at most one day's design work would be lost. If the hard disk fails again, the backup software is used to restore the latest full backup and then each incremental backup onto a new disk, so the company can carry on meeting its clients' deadlines.

Why: Level 3: full and incremental backups are explained and applied to a weekly and nightly schedule (AO1); off-site storage and the restore sequence onto a replacement disk are developed and clearly tied to the hard disk failure (AO2).

Some marks2/6

The company should back up its files to an external hard disk. A full backup copies all of the files, so the project files can be restored if the hard disk fails again. The backup should be kept in a different room in case there is a fire.

Why: Level 1: names a full backup and briefly links it to restoring files, and gives a weak location point, but there is no incremental backup, frequency or developed restore sequence, so the points remain basic and independent.

No marks0/6

Backup software repairs the hard disk when it fails, so the company will not lose anything and can open the files again.

Why: Level 0: the only claim is that backup software repairs the failed hard disk and prevents all loss, which the mark scheme does not accept; no valid type, location, frequency or restoration point is made.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.