Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

5 questions · 14 marks

Pick again
Print
1Describe2 marksPeripheral Management Swap Remove

A student uses a graphics tablet connected to a computer to draw in a program.

Describe how the operating system passes input from the graphics tablet to the program.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • The operating system receives signals/data from the graphics tablet (1) and converts them into data the program can use/process (1)
  • The operating system receives data from the graphics tablet (1) and passes/forwards it to the program being used/the active program (1)
  • The tablet's device driver receives/interprets the signals/data from the tablet (1) so the operating system can pass the input to the program (1)
  • The operating system identifies the graphics tablet as the source of the input (1) so the data is sent to the correct program (1)

Accept 'signals' for 'data' throughout.

Accept reference to the device driver only where it is linked to receiving/interpreting the input (e.g. the driver receives the tablet's signals (1) so the OS can pass data to the program (1)).

Do not accept 'the operating system uses a driver' on its own, without saying what the driver does with the input.

Do not accept generic statements such as 'the operating system runs the tablet' as a description of how input is managed.

Do not accept responses that say the operating system creates/finishes the drawing, or that the tablet stores the input permanently.

Example answers and how they were marked
Full marks2/2

The operating system receives signals from the graphics tablet and passes the data to the program.

Why: Receives signals/data from the tablet (1) and passes the data to the active program (1).

Some marks1/2

The operating system receives signals from the graphics tablet.

Why: Gives the first half of a linked description (1): it receives signals, but does not say what happens to the input.

No marks0/2

The operating system uses a device driver to control the graphics tablet and stores the input.

Why: Only says the OS uses a driver to control the tablet and that input is stored; it does not describe the driver receiving/interpreting the input or the input being passed to the program, so no linked point is credited. The mark scheme rejects 'uses a driver' on its own.

2Describe2 marksMemory Management Swap Remove

A user closes a program that is running on a computer.

Describe how the operating system manages the main memory that the program was using.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • The memory (that was) used by the program is freed/released/marked as free (1) so it can be allocated/reused by another program/process (1)
  • The operating system's memory allocation table/record (of memory in use) is updated (1) to show that the program's memory locations/blocks are now free/available (1)
  • The program's instructions/data are removed/overwritten in main memory (1) so the space they used is no longer reserved for that program (1)
  • The memory pages/blocks allocated to the program are returned to the list of free pages/blocks (1) that can be used when the next program is loaded (1)

For both marks, the expansion must follow/associate with the statement.

Do not award two marks for the same idea described twice (e.g. the memory is freed and added to a list of free blocks); the two marks must come from two different linked descriptions.

Do not accept responses about closing the program window, stopping/terminating the program/process, saving the file or deleting the program from secondary storage/the hard disk.

Ignore statements that main memory is 'managed'/'cleaned up' with no development.

Example answers and how they were marked
Full marks2/2

The operating system updates its memory allocation table to show that the memory locations the program was using are now free, so another program can be loaded into them.

Why: The memory allocation table/record is updated (1) linked to showing the program's memory locations are now free/available (1).

Some marks1/2

The operating system frees up the memory the program was using.

Why: The memory used by the program is freed/released (1), but there is no linked development of what this allows.

No marks0/2

The operating system deletes the program from the hard disk to free up memory.

Why: This confuses main memory with secondary storage; deleting the program from secondary storage is named in the 'Do not accept' line, so no creditworthy point is made.

3Describe2 marksUser Management Swap Remove

A family shares one computer that has a single hard drive.

Describe how the operating system uses user management to limit the amount of storage space each user is allowed.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • A storage limit/quota is set for each user account (1) so the drive is shared fairly between users (1)
  • The operating system records how much space each user's files are using (1) and refuses to save more files when the limit is reached (1)
  • Each user is given a fixed share/quota of the drive (1) so one user cannot use the space set aside for another (1)

Allow a limit set by an administrator or through the operating system's user management settings; an administrator is not required for credit.

Allow a warning that stops the save; do not award the development for a warning alone where the save is not stopped.

Do not accept responses about passwords/authentication, keeping files separate/folders with no storage limit, deleting old files, compressing files, or buying a larger drive.

Do not accept 'the operating system gives the user a bigger hard drive'.

Do not accept a single global limit for all users; the limit must apply to each user/user account.

Example answers and how they were marked
Full marks2/2

The operating system sets a maximum amount of storage for each user account. When a user reaches this limit, the operating system will not let them save any more files.

Why: Storage limit/quota set for each account (1); saving refused at the limit (1).

Some marks1/2

The operating system sets a maximum amount of storage for each user account.

Why: First point of a storage limit set for each user (1), but no development of what happens when it is reached (0).

No marks0/2

The operating system compresses the user's files so that there is more space on the drive.

Why: Describes compression, which does not limit a user's storage; no creditworthy point.

4Explain2 marksPeripheral Management Swap Remove

A new printer is connected to a computer.

Explain the purpose of a device driver.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • It allows the operating system/OS to communicate with the device/printer (1) because it translates the commands into signals the device understands (1)
  • It contains/sends the instructions/commands needed by a particular device (1) so the device carries out the correct actions (1)
  • It controls the device/printer (1) by sending commands/signals to it (1)
  • Different devices need different commands (1) so each one needs its own driver to work with the operating system (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'it drives/controls the device' on its own without saying how, e.g. by sending commands/signals.

Do not accept hardware/a physical device (a device driver is software).

Do not accept 'it connects the printer to the computer' or 'it installs the printer' without saying that it provides the instructions/commands for the device.

Example answers and how they were marked
Full marks2/2

It allows the operating system to send commands to the printer because it translates them into signals that the printer understands.

Why: Linked point (1) and reason (1).

Some marks1/2

It contains the instructions that the printer needs.

Why: Point (1) but no linked reason.

No marks0/2

It is a piece of hardware that connects the printer to the computer.

Why: Misconception: a device driver is software, not hardware, and saying it connects the printer is not accepted without saying it provides the instructions/commands.

5Discuss6 marksFile Management Swap Remove

A small business has one computer with a single hard disk. Two employees save documents and photographs to it every day. The operating system manages the disk.

Discuss why the operating system needs to manage where files are stored on the disk.

Your answer should include:

  • how the operating system allocates disk space when a file is saved
  • how the operating system keeps track of each file
  • what could happen if the operating system did not manage files
[6 marks]
Mark scheme

Indicative content

Allocating space

  • The operating system checks that there is enough free space before a file is saved, so a large photograph does not make the save fail.
  • The operating system finds free space on the disk and allocates it to the new file, so the file's data has somewhere to be written.
  • Disk space is allocated so that a file is not written on top of data that already belongs to another file.
  • When a file is deleted, the operating system marks its space as free so it can be used again by the next document that is saved.

Keeping track

  • The operating system keeps a record of the name, size and location of every file, so it knows where each file is stored.
  • The record is updated whenever a file is saved, renamed or deleted, so it still matches what is on the disk.
  • The operating system uses this record to find a file again, so an employee can open a document or photograph that was saved earlier.
  • The record lets the operating system tell the two employees' documents and photographs apart, even though they are all on the same disk.

Without this management

  • Two files could be given the same space, so one document would overwrite another and the work would be lost.
  • The operating system would not know where a file is stored, so a saved document could not be found and opened again.
  • Space used by deleted files might never be freed, so the disk would fill up and new files could not be saved.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Level 3 responses must cover both the allocation of space and the tracking of files, with at least one consequence of no management linked to its cause. Reference to a file being split across blocks that are not next to each other, or to the record holding the location of each block, is Level 3 detail and is not required.

Basic, unlinked points with no application to the business's documents or photographs, and a consequence such as 'files would be lost' with no cause given, are limited to Level 1; to reach Level 2 a point must be linked to a reason (for example, the record is kept so a document can be found again) and be applied to the context. Do not accept defragmentation, process scheduling, user management, peripheral management, or backup and antivirus scanning, as file management.

Example answers and how they were marked
Full marks6/6

Before a document is saved, the operating system checks that there is enough free space on the single disk, so a large photograph cannot make the save fail. It then finds free space and allocates it to the new file, making sure it does not write over data that already belongs to another file. The operating system keeps a record of the name, size and location of every file and updates it whenever a file is saved or deleted. It uses this record to find a file again, so an employee can open a document that was saved earlier. Without this, the two employees could be given the same space, so one document would overwrite the other, or the operating system would not know where a file is stored and the business could not find its work again.

Why: Covers both allocation (free space check, free space given to the file, no overwriting) and tracking (record of name, size and location, updated on save, used to find the file), applies it to the business's single disk and its two employees' documents and photographs, and links the consequences of no management to their causes: Level 3.

Some marks2/6

The operating system decides where on the disk a file is saved. It also keeps a record of where each file is stored. Without this, files would be lost.

Why: Two basic points are made: space is allocated when a file is saved, and a record of where each file is stored is kept. Neither is linked to a reason, there is no application to the business's documents and photographs, and 'files would be lost' is given with no cause: Level 1, top of the level.

Some marks1/6

The operating system puts files in the right place so the disk does not get full. It also defragments the disk to make the files smaller.

Why: One basic point about the operating system placing files on the disk so it does not fill up (Level 1). Defragmentation is not file management and does not make files smaller, so it is not credited: Level 1.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.