Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

5 questions · 14 marks

Pick again
Print
1Short recall2 marksFile Management Swap Remove

An operating system manages the files stored on a computer.

State two ways the operating system manages where files are stored on the disk.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Decides/allocates which part/space on the disk a file is written to (1)
  • Keeps an index/record of the location of each file so that it can be found/retrieved (1)
  • Prevents a file from being overwritten by another file (1)
  • Checks there is enough free space on the disk before a file is saved (1)

Allow 'file allocation table' for keeping an index/record of file locations

Only award one mark for answers that say the operating system decides/allocates where a file is stored or allocates free space on the disk

Do not accept defragmentation

Do not accept 'stores files', 'saves files' or 'backs up files' (these only repeat the stem)

Do not accept 'organises files into folders' on its own

Do not accept scheduling processes or managing peripherals

Example answers and how they were marked
Full marks2/2

It keeps an index of where each file is stored so it can be found again, and it stops a new file overwriting an existing file.

Why: Keeps an index of file locations so files can be retrieved (1) and prevents a file being overwritten (1).

Some marks1/2

It keeps a record of where each file is stored.

Why: Keeps an index/record of file locations (1), but does not give a second way.

No marks0/2

It saves files on the hard disk and organises them into folders.

Why: 'Saves files' only repeats the stem and 'organises files into folders' on its own is not accepted, so no creditworthy point is given.

2Short recall2 marksPurpose & Function of Operating Systems Swap Remove

A computer can run more than one process at a time.

Give two tasks carried out by the process management function of an operating system.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Deciding which process runs next on the CPU/scheduling processes (1)
  • Allocating processor/CPU time to processes/allowing multitasking (1)
  • Managing the process life-cycle/process states (ready, running, blocked) (1)
  • Handling interrupts so a running process is suspended and another can run (1)
  • Stopping/terminating a process when it has finished (1)

Do not accept 'managing processes' on its own.

Do not accept 'handling interrupts' on its own.

Do not award two marks for the same task expressed twice, e.g. 'deciding which process runs next' and 'scheduling processes', or 'allocating CPU time' and 'giving each process a share of processor time'.

Do not accept 'managing memory/memory management', 'managing files/file management' or 'managing devices/peripherals' (these are other functions of an operating system).

Example answers and how they were marked
Full marks2/2

Deciding which process runs next on the CPU and stopping a process when it has finished.

Why: Scheduling a process (1) and terminating a process (1) are two different named tasks.

Some marks1/2

Deciding which process runs next and scheduling processes.

Why: Both points are the same task expressed twice, so only one mark is awarded under the guidance.

No marks0/2

Managing processes and managing files.

Why: 'Managing processes' repeats the question and earns nothing; 'managing files' is file management, not process management, so it is not credited.

3Describe2 marksMemory Management Swap Remove

A program is stored on secondary storage before it is run.

Describe how the operating system manages memory when a program is started.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • The program (and its data) is copied/loaded from secondary storage into main memory/RAM (1) so that the CPU can fetch/execute its instructions (1)
  • An area of main memory is allocated/reserved for the program (1) that is large enough to hold the program and its data (1)
  • The operating system checks that there is enough free main memory (1) before the program can be started/loaded, otherwise it cannot run/an error is reported (1)
  • The operating system keeps a record of the memory addresses used by the program (1) so that its instructions and data can be found when it runs (1)

Allow 'loaded into RAM', 'stored in memory' and 'put into main memory' as equivalent to copied into main memory.

A single statement that the program is loaded/stored in main memory, with no linked development, can be given one mark only.

Do not accept descriptions of the CPU fetching/executing instructions that do not refer to the operating system loading or allocating memory.

Do not accept responses about virtual memory (moving processes to secondary storage) or about which process runs next on the CPU.

Do not accept the program being run from secondary storage/hard disk.

Example answers and how they were marked
Full marks2/2

The operating system copies the program and its data from secondary storage into main memory so that the CPU can fetch and execute its instructions.

Why: Copying the program and data into main memory (1) linked to the CPU fetching/executing instructions (1).

Some marks1/2

The operating system loads the program into main memory.

Why: The program is copied/loaded into main memory (1), but there is no linked development of how or what this leads to, so only one mark is given.

No marks0/2

The CPU fetches the program's instructions from main memory and executes them one at a time.

Why: This describes the fetch-decode-execute cycle, not the operating system loading or allocating memory, which is the Do not accept line; no creditworthy point is made.

4Explain2 marksPeripheral Management Swap Remove

A new printer is connected to a computer.

Explain the purpose of a device driver.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • It allows the operating system/OS to communicate with the device/printer (1) because it translates the commands into signals the device understands (1)
  • It contains/sends the instructions/commands needed by a particular device (1) so the device carries out the correct actions (1)
  • It controls the device/printer (1) by sending commands/signals to it (1)
  • Different devices need different commands (1) so each one needs its own driver to work with the operating system (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'it drives/controls the device' on its own without saying how, e.g. by sending commands/signals.

Do not accept hardware/a physical device (a device driver is software).

Do not accept 'it connects the printer to the computer' or 'it installs the printer' without saying that it provides the instructions/commands for the device.

Example answers and how they were marked
Full marks2/2

It allows the operating system to send commands to the printer because it translates them into signals that the printer understands.

Why: Linked point (1) and reason (1).

Some marks1/2

It contains the instructions that the printer needs.

Why: Point (1) but no linked reason.

No marks0/2

It is a piece of hardware that connects the printer to the computer.

Why: Misconception: a device driver is software, not hardware, and saying it connects the printer is not accepted without saying it provides the instructions/commands.

5Discuss6 marksUser Management Swap Remove

A school library has 24 computers that are shared by students and teachers throughout the day. Each computer runs an operating system. The school wants users' work to be kept private and the computers to be used only by authorised people.

Discuss how the operating system's user management features can be used to share the computers securely.

Your answer should include:

  • user accounts
  • authentication
  • the benefits for the school.
[6 marks]
Mark scheme

Indicative content

User accounts

  • Each student and teacher should have their own user account, so the operating system can identify the person who is logged on.
  • The operating system keeps a record of all valid users on the computer, so unknown users are not allowed to log in.
  • A separate home area or folder can be created for each account, so a student's saved work is kept apart from other users' work.
  • An account can be disabled when a student leaves the school, so they can no longer access the computers.

Authentication

  • A username and password can be required at login, so only users with the correct details can use the computer.
  • The operating system checks the entered password against the stored password for that account before allowing access.
  • Users should be encouraged to choose a strong password, which makes it harder for someone else to guess and log in.
  • The operating system can lock an account after several failed login attempts, which reduces the chance of someone trying passwords repeatedly.

Benefits for the school

  • Many students can share the same computers because each person's files are kept separate.
  • Work is less likely to be deleted or changed by another student, because users only see their own files.
  • The school can see which account was used on a computer, so misuse can be traced to a user.
  • Teachers can be confident that only authorised people can use the library computers.
  • The school does not need a separate computer for every student, so it saves money.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Level 3 responses must cover both user accounts and authentication, and apply them to the school library.

Do not accept general operating system functions such as file management or process management unless they are explicitly linked to managing users.

Example answers and how they were marked
Full marks6/6

Each student and teacher should have their own user account with a username and password. When someone logs in, the operating system checks the password against the one stored for that account, so only authorised people can use the computer. Each account can have its own home folder, so a student's work is kept private and another student cannot open or delete it. If a student leaves the school, their account can be disabled so they cannot log in again. This lets the school share a smaller number of computers safely, as each user's work stays separate and any misuse can be traced to the logged-in account.

Why: Level 3. It explains user accounts, authentication and benefits, with sustained links to sharing computers in the school library.

Some marks4/6

Every user should have a username and password. The operating system checks the password so that people who are not allowed cannot log in. Each user should also have their own area to save files so they do not delete other people's work.

Why: Level 2. Basic accounts and authentication points are made and linked, but the benefits to the school are only briefly applied and not developed.

No marks0/6

The operating system manages the users by looking after the files in folders and by making sure the printer works for everyone. It also keeps the computer running quickly when lots of students use it.

Why: Level 0. These are general operating system functions such as file management and peripheral management, not user management, so no creditworthy point is made.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.