Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 659 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

5 questions · 8 marks

Pick again
Print
1Multiple choice1 markFetch Decode Execute Cycle Swap Remove

Identify the component that stores instructions and data during the fetch-decode-execute cycle.

[1 mark]
  • AArithmetic logic unit
  • BClock
  • CMain memory (RAM)
  • DProgram counter
Mark scheme
  • C Main memory (RAM) (1)
  • The only correct answer is C. The correct answer is main memory (RAM); accept 'main memory', 'RAM' or 'random access memory'.
  • A is not correct because the arithmetic logic unit performs arithmetic and logical operations
  • B is not correct because the clock sends regular pulses to synchronise the components of the CPU
  • D is not correct because the program counter holds the address of the next instruction, not the instructions and data
Example answers and how they were marked
Full marks1/1

C Main memory (RAM)

Why: Correct option: main memory (RAM) stores instructions and data during the fetch-decode-execute cycle (1).

No marks0/1

D Program counter

Why: Near-miss distractor: the program counter holds the address of the next instruction, not the instructions and data (0).

No marks0/1

A Arithmetic logic unit

Why: Misconception: the ALU performs arithmetic and logical operations, so it does not store instructions and data (0).

2Multiple choice1 markStored Program Computers Swap Remove

Identify the bus that carries addresses in one direction only, from the CPU to main memory.

[1 mark]
  • AAddress bus
  • BControl bus
  • CData bus
  • DSystem bus
Mark scheme
  • A Address bus (1)
  • The only correct answer is A. The correct answer is address bus. Do not accept 'address' on its own.
  • B is not correct because the control bus carries control signals in both directions between the CPU and other components
  • C is not correct because the data bus carries data in both directions between the CPU and main memory
  • D is not correct because the system bus is the collection of all three buses
Example answers and how they were marked
Full marks1/1

A Address bus

Why: Correct option: the address bus carries addresses in one direction only, from the CPU to main memory (1).

No marks0/1

C Data bus

Why: The data bus carries data in both directions, so it is not the bus that carries addresses in one direction only from the CPU to main memory; no creditworthy point.

No marks0/1

B Control bus

Why: The control bus carries control signals in both directions, not addresses in one direction only; this is the common control/address bus confusion, so no mark.

3Describe2 marksSecondary Memory Swap Remove

Computers use secondary storage.

Describe the role of secondary storage.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Stores programs (including the operating system) and data that are not currently in use (1) so that they can be loaded into RAM/main memory when needed (1)
  • Keeps files/programs/data when the power is turned off (1) which happens because it is non-volatile (1)
  • Stores files/data for backup or archiving (1) so that they can be recovered if the originals are lost/corrupted (1)

A correct role on its own earns one mark; the second mark requires a linked development.

Accept either order if both the role and the link are given.

Do not accept 'it is non-volatile' on its own, unless it is linked to keeping data when the power is turned off.

Do not accept answers that only name a storage type (magnetic, optical, solid state) without describing a role.

Do not accept responses that describe primary storage/RAM, e.g. storing the data/instructions the CPU is currently working on, or that secondary storage makes the computer run faster.

Example answers and how they were marked
Full marks2/2

Secondary storage stores programs and data that are not currently in use so that they can be loaded into RAM when they are needed.

Why: Role point (1) linked to loading into RAM when needed (1).

Some marks1/2

It stores files and programs that are not currently in use.

Why: Correct role on its own earns one mark (1); no linked development, so the second mark is not awarded.

No marks0/2

It holds the data and instructions the CPU is working on so the computer runs faster.

Why: Describes primary storage/RAM and a speed benefit, which the mark scheme does not accept; no role of secondary storage is given.

4Describe2 marksStored Program Computers Swap Remove

A computer is based on the von Neumann stored program concept.

Describe how the CPU uses main memory (RAM) during the fetch-decode-execute cycle.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • The program's instructions (and the data it uses) are held in main memory/RAM (1) so the CPU fetches both the instructions and the data from that one memory (1)
  • The CPU fetches the next instruction from main memory/RAM (1) using the address of the memory location that holds it (1)
  • The CPU reads/fetches data from main memory/RAM (1) when an instruction needs it and writes the result back to main memory/RAM (1)
  • The program's instructions are held in main memory/RAM while the program runs (1) and the CPU fetches them one at a time/one after another to be decoded and executed (1)

Allow 'memory' for main memory/RAM.

Allow 'gets' for fetches/reads.

For both marks, the development must say what the CPU does with the contents of main memory (fetches/reads/writes), not just that main memory is used.

Do not accept answers about the program being stored in secondary storage, such as on a hard drive, or about it being loaded from there.

Do not accept benefits such as the computer running faster or being easier for the user.

Do not accept naming CPU components (control unit, arithmetic logic unit, registers) or buses on their own, without saying what is stored or fetched.

Do not accept 'the computer stores data' on its own, without a link to the instructions of a program.

Example answers and how they were marked
Full marks2/2

The program's instructions and the data it uses are both held in the same main memory (RAM), so the CPU can fetch the instructions and the data it needs from that one memory.

Why: Linked point (1) that instructions and data are stored together in main memory, with the development (1) that the CPU fetches both from the same memory.

Some marks1/2

The CPU fetches the instructions from main memory so that they are processed more quickly.

Why: The first point earns (1) for the CPU fetching instructions from main memory. The second statement is a benefit (speed), which the 'Do not accept benefits' line rules out, so it earns nothing.

No marks0/2

The control unit decodes each instruction and the ALU carries out the calculations.

Why: Both statements name CPU components without saying what is stored, fetched or written, which the mark scheme tells examiners not to accept, so neither earns a mark.

5Explain2 marksEmbedded Systems Swap Remove

A fitness tracker is worn on the wrist and uses an embedded system to count the wearer's steps.

Explain one reason why an embedded system is used in a fitness tracker.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • The battery lasts longer/needs charging less often (1) because embedded systems have low power consumption/use less power (1)
  • It can be made small/light enough to wear on the wrist (1) because the processor, memory and input/output are combined on a single chip/microcontroller (1)
  • It can carry out the step-counting function reliably (1) because it runs a single/dedicated program and cannot install other software (1)
  • It has a low cost per unit (1) because it uses fewer/less powerful components than a general purpose computer (1)

For both marks, the expansion must follow/associate with the statement.

Award one mark for a valid point stated on its own, e.g. 'it is small/light enough to wear on the wrist' (1) or 'its battery lasts longer before it needs charging' (1).

Accept the same linked ideas in either order, e.g. 'it uses less power (1) so the battery lasts longer (1)'.

Do not accept 'it uses less power'/'low power' on its own as a complete explanation; it must be linked to the battery lasting longer/needing charging less often for the second mark.

Do not accept an expansion that simply restates the point, e.g. 'it is small (1) so it fits on the wrist' earns only the point mark; 'fits on the wrist' is not a linked cause and is not enough for the second mark.

Do not accept 'the battery is small' as the linked reason for low power consumption.

Do not accept responses that say other software/apps can be installed on an embedded system (0); embedded systems have a single/dedicated function and cannot install new software.

Example answers and how they were marked
Full marks2/2

The battery lasts longer before it needs charging because an embedded system has low power consumption.

Why: Point (1) and linked reason (1); low power consumption explains why the battery lasts longer.

Some marks1/2

It is small so it fits on the wearer's wrist.

Why: Point 'small' earns (1); 'fits on the wrist' restates the point rather than giving the linked cause (components combined on a single chip), so no second mark.

No marks0/2

It can run other apps as well because it is a tiny computer.

Why: Misconception that embedded systems can install other software; no creditworthy point or linked reason.

Questions by topic

5.3 Cybersecurity

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.