Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 7 marks

Pick again
Print
1Multiple choice1 markFetch Decode Execute Cycle Swap Remove

Identify the component that stores instructions and data during the fetch-decode-execute cycle.

[1 mark]
  • AArithmetic logic unit
  • BClock
  • CMain memory (RAM)
  • DProgram counter
Mark scheme
  • C Main memory (RAM) (1)
  • The only correct answer is C. The correct answer is main memory (RAM); accept 'main memory', 'RAM' or 'random access memory'.
  • A is not correct because the arithmetic logic unit performs arithmetic and logical operations
  • B is not correct because the clock sends regular pulses to synchronise the components of the CPU
  • D is not correct because the program counter holds the address of the next instruction, not the instructions and data
Example answers and how they were marked
Full marks1/1

C Main memory (RAM)

Why: Correct option: main memory (RAM) stores instructions and data during the fetch-decode-execute cycle (1).

No marks0/1

D Program counter

Why: Near-miss distractor: the program counter holds the address of the next instruction, not the instructions and data (0).

No marks0/1

A Arithmetic logic unit

Why: Misconception: the ALU performs arithmetic and logical operations, so it does not store instructions and data (0).

2Multiple choice1 markStored Program Computers Swap Remove

Identify the bus that carries addresses in one direction only, from the CPU to main memory.

[1 mark]
  • AAddress bus
  • BControl bus
  • CData bus
  • DSystem bus
Mark scheme
  • A Address bus (1)
  • The only correct answer is A. The correct answer is address bus. Do not accept 'address' on its own.
  • B is not correct because the control bus carries control signals in both directions between the CPU and other components
  • C is not correct because the data bus carries data in both directions between the CPU and main memory
  • D is not correct because the system bus is the collection of all three buses
Example answers and how they were marked
Full marks1/1

A Address bus

Why: Correct option: the address bus carries addresses in one direction only, from the CPU to main memory (1).

No marks0/1

C Data bus

Why: The data bus carries data in both directions, so it is not the bus that carries addresses in one direction only from the CPU to main memory; no creditworthy point.

No marks0/1

B Control bus

Why: The control bus carries control signals in both directions, not addresses in one direction only; this is the common control/address bus confusion, so no mark.

3Short recall3 marksFetch Decode Execute Cycle Swap Remove

The fetch-decode-execute cycle is used by the CPU.

State three things that happen during the fetch stage.

[3 marks]
Mark scheme

Award one mark for any of the following up to a maximum of three marks:

  • The address (of the next instruction) is sent from the CPU to main memory / placed on the address bus (1)
  • The (next) instruction is fetched/read from main memory (RAM) (1)
  • The instruction is brought/copied into the CPU / received into the MDR (1)
  • The program counter (PC) is incremented/updated to hold the address of the next instruction (1)

Allow 'the PC/MAR is placed on the address bus' for the address being sent to main memory.

Allow 'the MDR receives the instruction' for the instruction being brought into the CPU.

Do not award a second mark for the instruction being fetched from main memory and the instruction being brought into the CPU; these are the same point.

Do not award 'the instruction is transferred along the data bus' on its own; this is the same point as the instruction being fetched from main memory.

Do not accept answers about decoding the instruction, e.g. 'the instruction is fetched from RAM and decoded', as decoding happens in the decode stage.

Do not accept answers about the execute stage, e.g. 'the ALU carries out the calculation' or 'the result of a calculation is stored in a register', as these happen in the execute stage.

Example answers and how they were marked
Full marks3/3

The address of the next instruction is sent to main memory, the instruction is fetched from RAM, and the program counter is incremented.

Why: Address sent to main memory (1), instruction fetched from RAM (1) and program counter incremented (1).

Some marks1/3

The instruction is fetched from main memory and then decoded.

Why: Fetching the instruction from main memory (1); decoding happens in the decode stage, so it is not creditworthy in the fetch stage.

No marks0/3

The ALU carries out the calculation and the result is stored in a register.

Why: The ALU carrying out a calculation and storing a result happen in the execute stage, not the fetch stage, so no point is creditworthy.

4Describe2 marksSecondary Memory Swap Remove

A laptop uses a solid state drive (SSD) for secondary storage.

Describe how data is stored on a solid state drive.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Data is stored on (flash) memory chips/cells (1) as a pattern of electrical charges (1)
  • A current/voltage forces electrons through a barrier (1) so that they are trapped (or not trapped) to hold/represent a value (1)
  • Cells with a trapped charge and cells with no trapped charge (1) represent 1s and 0s/binary (1)
  • The trapped charge remains when the power is turned off (1) so the data is not lost/it is non-volatile (1)

Do not accept responses that describe magnetic storage, e.g. magnetised platters, spinning disks or read/write heads, or optical storage, e.g. lasers, pits and lands.

Do not award a mark for 'it is solid state' or 'it has no moving parts' without a description of how the data is stored.

Do not award a mark for restating the stem, e.g. 'a laptop uses an SSD' or 'an SSD uses flash memory'.

'Data is stored as electrical charges' on its own, with no reference to memory chips/cells or to how the charge is held, earns a maximum of one mark (1).

A response that only describes electrons being trapped, with no link to how the value/data is represented, earns one mark (1). The second mark needs a link such as trapped and not trapped charge representing 1s and 0s, or the trapped charge being kept so the data is not lost.

Example answers and how they were marked
Full marks2/2

A current is used to force electrons through a barrier so that they become trapped, and a cell with a trapped charge or a cell with no trapped charge represents a 1 or a 0.

Why: Linked description: a current forces electrons through a barrier (1) and trapped/not trapped charge represents 1s and 0s (1).

Some marks1/2

The data is stored in flash memory chips.

Why: Gives the creditworthy point that data is stored on flash memory chips (1) but does not develop it, e.g. by saying the data is held as electrical charges or by describing trapped electrons.

No marks0/2

The data is stored as magnetised areas on a spinning platter.

Why: This describes magnetic storage, which the mark scheme says not to accept for a solid state drive.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 71
Data Protection Act 17 questions Impact of AI 18 questions Intellectual Property 18 questions Software Licences 18 questions

5.3 Cybersecurity

Build a paper on this topic 36
Malware 18 questions Social Engineering 18 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.