Edexcel GCSE Computer Science (1CP2) Exam Questions

• C Main memory (RAM) (1)
• The only correct answer is C. The correct answer is main memory (RAM); accept 'main memory', 'RAM' or 'random access memory'.
• A is not correct because the arithmetic logic unit performs arithmetic and logical operations
• B is not correct because the clock sends regular pulses to synchronise the components of the CPU
• D is not correct because the program counter holds the address of the next instruction, not the instructions and data

Award up to two marks for a linked description such as:

• Data is stored on (flash) memory chips/cells (1) as a pattern of electrical charges (1)
• A current/voltage forces electrons through a barrier (1) so that they are trapped (or not trapped) to hold/represent a value (1)
• Cells with a trapped charge and cells with no trapped charge (1) represent 1s and 0s/binary (1)
• The trapped charge remains when the power is turned off (1) so the data is not lost/it is non-volatile (1)

Do not accept responses that describe magnetic storage, e.g. magnetised platters, spinning disks or read/write heads, or optical storage, e.g. lasers, pits and lands.

Do not award a mark for 'it is solid state' or 'it has no moving parts' without a description of how the data is stored.

Do not award a mark for restating the stem, e.g. 'a laptop uses an SSD' or 'an SSD uses flash memory'.

'Data is stored as electrical charges' on its own, with no reference to memory chips/cells or to how the charge is held, earns a maximum of one mark (1).

A response that only describes electrons being trapped, with no link to how the value/data is represented, earns one mark (1). The second mark needs a link such as trapped and not trapped charge representing 1s and 0s, or the trapped charge being kept so the data is not lost.

Award up to two marks for a linked explanation such as:

• The battery lasts longer/needs charging less often (1) because embedded systems have low power consumption/use less power (1)
• It can be made small/light enough to wear on the wrist (1) because the processor, memory and input/output are combined on a single chip/microcontroller (1)
• It can carry out the step-counting function reliably (1) because it runs a single/dedicated program and cannot install other software (1)
• It has a low cost per unit (1) because it uses fewer/less powerful components than a general purpose computer (1)

For both marks, the expansion must follow/associate with the statement.

Award one mark for a valid point stated on its own, e.g. 'it is small/light enough to wear on the wrist' (1) or 'its battery lasts longer before it needs charging' (1).

Accept the same linked ideas in either order, e.g. 'it uses less power (1) so the battery lasts longer (1)'.

Do not accept 'it uses less power'/'low power' on its own as a complete explanation; it must be linked to the battery lasting longer/needing charging less often for the second mark.

Do not accept an expansion that simply restates the point, e.g. 'it is small (1) so it fits on the wrist' earns only the point mark; 'fits on the wrist' is not a linked cause and is not enough for the second mark.

Do not accept 'the battery is small' as the linked reason for low power consumption.

Do not accept responses that say other software/apps can be installed on an embedded system (0); embedded systems have a single/dedicated function and cannot install new software.

Indicative content

The role of the CPU and registers

• The control unit decodes the instruction fetched from main memory and controls the other components during the cycle.
• The ALU carries out arithmetic and logical operations during the execute stage, such as adding two values held in registers.
• Registers hold the data, addresses and results that the CPU is working on during the cycle.
• The program counter holds the address of the next instruction to be fetched, so it is incremented after each fetch.
• The memory address register holds the address of the memory location that is about to be read or written.
• The memory data register holds the instruction or data that has been fetched from or is being written to main memory.

The role of the address bus, data bus and control bus

• The address bus carries the address of the memory location that the CPU needs to access from the CPU to main memory.
• The address bus is one-way, so addresses are only sent from the CPU to main memory.
• The data bus carries instructions and data between the CPU and main memory, so it is bi-directional.
• The width of the data bus affects how many bits can be transferred at one time.
• The control bus carries control signals such as read and write signals, so main memory knows whether the CPU wants to read an instruction or write data.
• The control bus carries signals from the control unit to coordinate the components during the fetch-decode-execute cycle.

The role of the clock

• The clock sends regular pulses that synchronise the actions of the CPU and main memory.
• Each clock pulse triggers the next step of the fetch-decode-execute cycle, so the stages happen in the correct order.
• The clock provides a regular timing signal so that the fetch-decode-execute cycle repeats at a steady rate.
• The clock is separate from the control bus; the control bus carries control signals, while the clock provides timing pulses.
• Do not credit the address bus storing addresses, the data bus storing data, or the control bus controlling the computer without naming a control signal; do not credit clock speed affecting performance as a role in the cycle.
• Level 3 responses must cover all three bullets and link them to the fetch-decode-execute cycle; Level 2 answers may identify roles but link them only partly to the cycle.

Levels

• Level 0 (0 marks): No rewardable content.
• Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
• Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
• Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Indicative content

What each bus carries

• The address bus carries the address of a memory location that the CPU wants to read from or write to.
• The data bus carries data and instructions between the CPU and main memory, and between the CPU and other components such as the input and output controllers.
• The control bus carries control signals, such as read and write, that coordinate the activities of the computer.
• The clock is a separate component that sends regular pulses, and the control bus carries the signals that keep the other components in time with those pulses.

Direction

• The address bus is one-way, carrying addresses from the CPU to main memory.
• The data bus is two-way, so data and instructions can travel both to and from the CPU.
• The control bus carries control signals from the control unit to the other components, and it is not the clock signal itself.
• The number of bits in the address bus determines how many memory locations can be addressed, and the number of bits in the data bus determines how much can be transferred at one time.

The role of the buses in the fetch-decode-execute cycle

• Fetch: the address of the next instruction, held in a register in the CPU, is placed on the address bus so that main memory knows which location to read.
• Fetch: the control unit sends a read signal on the control bus to main memory.
• Fetch: the instruction held in that location is returned to the CPU on the data bus.
• Decode: the control unit decodes the instruction and sends control signals on the control bus to set up the other components, for example telling the ALU which operation to carry out.
• Execute: the address of any data needed is placed on the address bus, a read or write signal is sent on the control bus, and the data itself travels between the CPU and main memory on the data bus.
• The cycle repeats, with each step taking place in time with a pulse from the clock.

Level 3 responses must cover all three buses and link them to the fetch-decode-execute cycle, including the fetch stage and at least one of the decode and execute stages. Answers that describe each bus correctly but link none of them to a stage of the cycle are limited to Level 1.

Do not accept 'the address bus carries data', 'the data bus carries addresses', 'the data bus carries instructions only during the fetch stage', 'the control bus carries the clock signal' or 'the control bus is the clock'; the clock is a separate component whose pulses the control signals coordinate with.

Levels

• Level 0 (0 marks): No rewardable content.
• Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
• Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
• Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)