Edexcel GCSE Computer Science (1CP2) Exam Questions

• C Main memory (RAM) (1)
• The only correct answer is C. The correct answer is main memory (RAM); accept 'main memory', 'RAM' or 'random access memory'.
• A is not correct because the arithmetic logic unit performs arithmetic and logical operations
• B is not correct because the clock sends regular pulses to synchronise the components of the CPU
• D is not correct because the program counter holds the address of the next instruction, not the instructions and data

Award up to two marks for a linked description such as:

• Decodes instructions (1) to determine what action/operation is required (1)
• Sends control signals (1) along the control bus to coordinate/control the actions of other components (1)
• Controls the fetch stage (1) by causing the next instruction to be fetched from main memory/RAM (1)
• Controls the execute stage (1) by telling the ALU/other components when to carry out the required operation (1)

Do not accept responses relating to how the control unit affects performance, such as increasing clock speed.

Do not accept responses that describe the role of the ALU, registers or clock instead of the control unit.

Do not accept responses about the ALU performing calculations unless the control unit controlling the ALU is also stated.

Award up to two marks for a linked description such as:

• It reads/monitors the temperature/humidity/light level using sensors (1) to switch the heaters/vents/lamps/watering system on or off when the reading is outside the set range (1)
• It compares the readings from the sensors with the set values/thresholds stored in its memory (1) to decide whether the conditions need to be changed (1)
• It monitors the light level using a light sensor (1) and turns the lamps on when the light falls below the level the plants need (1)
• It monitors the soil moisture using a soil moisture sensor (1) and turns the water pump/irrigation on when the soil is too dry (1)

For the second mark, the action/response must be linked to the sensor reading given in the first point.

Allow named sensors (temperature/humidity/light/soil moisture) and named outputs (heater, fan, vent/window, lamp, irrigation/water pump).

Do not accept answers that only name a sensor or only name an output, e.g. 'it has a temperature sensor and a heater', as there is no link between the reading and the control action.

Do not accept answers where a person switches the equipment on or off, as the embedded system controls the conditions automatically.

Award up to two marks for a linked explanation such as:

• (The ECU) is more reliable/less likely to crash (1) because it only runs the one program/has a single purpose (1)
• (The ECU) cannot be affected by other software/viruses (1) because it cannot run other software/it can only run the program it was made for (1)
• (The ECU) is cheaper (1) because it has limited processing resources/less memory/simple components (1)
• (The ECU) uses less power (1) because it has limited processing resources/a simpler processor (1)
• (The ECU) is smaller (1) because it has fewer components/less memory than a general purpose computer (1)

For both marks, the expansion must follow/associate with the statement.

A suitable benefit stated on its own earns one mark.

Do not accept a description or a location given as the reason, e.g. 'because it is part of the car', 'because it is inside the engine', 'because it is embedded'.

Do not accept a description of an embedded system on its own as the benefit, e.g. 'it does one specific job' or 'it is part of the car'.

Do not accept 'it is faster'/'it has a more powerful processor' as embedded systems have limited processing resources.