Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 604 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

5 questions · 18 marks

Pick again
Print
1Short recall2 marksUnits & Conversion Swap Remove

A solid state drive has a capacity of 5 gibibytes.

Give an expression to calculate the number of bits in 5 gibibytes. You do not need to do the calculation.

[2 marks]
Mark scheme

Award one mark for each of:

  • 5 × 1024^3 / 5 × 1024 × 1024 × 1024 / 5 × 2^30, for the number of bytes (1)
  • A fully correct expression with × 8 to convert bytes to bits, in any order, e.g. 5 × 1024^3 × 8, 8 × 5 × 2^30 (1)

Accept 5 × 1 073 741 824 × 8.

Accept 5 × 2^33 or 42 949 672 960 as a fully correct expression (2 marks).

Do not accept 5 × 1000^3 × 8, which uses decimal multiples.

Do not accept ÷ 8, which converts bits to bytes.

Example answers and how they were marked
Full marks2/2

8 × 5 × 2^30

Why: 5 × 2^30 is the number of bytes (1) and × 8 converts bytes to bits (1).

Some marks1/2

5 × 2^30

Why: Correct number of bytes using the binary multiple 2^30 (1), but no conversion to bits.

No marks0/2

5 × 1000^3 × 8

Why: Uses decimal 1000^3 instead of binary 1024^3, so the expression is not fully correct; no creditworthy point.

2Describe2 marksUtility Software Swap Remove

A student has a large number of photographs stored on a computer.

Describe the purpose of data compression software.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Makes a file/files smaller (1) so less storage space is needed on the disk (1)
  • Reduces the size of the data (1) so it takes less time to upload/download/transfer the file (1)
  • Compresses files/folders into a single file (1) so an attachment is under the size limit for email (1)
  • Reduces the size of the files (1) so more of them fit onto a storage device/backup media (1)

Do not accept 'it compresses the files' on its own, as this repeats the question.

Do not accept responses about protecting files from malware/viruses or about deleting files.

Example answers and how they were marked
Full marks2/2

It makes the files smaller (1) so that they use less storage space on the computer and more of them fit on the disk (1).

Why: The point (1) and a linked development giving the benefit (1).

Some marks1/2

It makes files smaller.

Why: This is the point (1) but there is no development of what the smaller size leads to, so only one mark.

No marks0/2

It protects the files from viruses so that they cannot be damaged.

Why: This describes anti-malware software, which the mark scheme does not accept; no creditworthy point is made.

3Explain2 marksThe Internet Swap Remove

Each data packet has a header that contains the destination IP address.

Explain one reason why a data packet contains the destination IP address.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Routers can forward the packet towards its destination (1) because they read the destination IP address in the packet header (1)
  • The packet is delivered to the correct device (1) because the receiving device compares the destination IP address with its own IP address (1)
  • Each packet can take a different route (1) because routers use the destination IP address to choose the next router (1)
  • The packet can be passed on by each router in turn (1) because the destination IP address shows which network the packet is for (1)

For both marks, the expansion must follow/associate with the statement.

Statements such as 'so it reaches the right destination' or 'so routers know where to send it' earn the first mark only; do not award the second mark unless the reason says that the address is read from the packet header and used to forward the packet.

Do not accept 'so it knows where it came from' as this describes the source address, not the destination address.

Do not accept 'so it gets there faster' without a linked reason.

Example answers and how they were marked
Full marks2/2

Routers know where to send it because they use the address in the packet header to choose the next network.

Why: Linked point (1) and reason (1): routers read the destination IP address in the header to forward the packet.

Some marks1/2

So that it reaches the right destination because every packet has an address.

Why: First mark (1) for reaching the right destination, but the reason is circular and does not say the address is read and used to forward the packet.

No marks0/2

So the packet knows where it came from.

Why: Describes the source address, not the destination address; do not accept.

4Discuss6 marksSoftware Basics Swap Remove

A dental practice has a network of computers used by receptionists, dentists and managers. Patient records are stored in shared folders and staff have different levels of access.

Discuss how the operating system's file management and user management support the dental practice.

Your answer should consider:

  • file management
  • user management
[6 marks]
Mark scheme

Indicative content

File management

  • The operating system organises the practice's patient records into folders, so staff can find a patient's record quickly during an appointment.
  • It carries out file operations such as saving, moving, renaming and deleting, so a dentist can save updated notes to the correct record.
  • It sets permissions on shared folders and files, so that only authorised staff, such as dentists, can open a patient's clinical records; this reduces the risk of confidential records being seen by the wrong staff.
  • It can give read-only access to some files, so receptionists can view appointment details but cannot change clinical notes.
  • It shows the size of files and the free space on the practice's shared storage, so managers can see when more storage is needed for records.

User management

  • The operating system creates a user account for each member of staff, with a username and password, so that each person has their own access to the system.
  • It allocates access rights to each account, so receptionists, dentists and managers each see only the folders and files their role needs.
  • It allows accounts to be grouped by role, so a new dentist can be given the same permissions as the existing dentists quickly instead of setting each one by hand.
  • It can require strong passwords, which makes it harder for one member of staff to log on using another person's account and open patient records.
  • It can disable or delete an account when a member of staff leaves, so that they can no longer open patient records.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Level 3 responses must cover both file management and user management and develop how each supports the practice, for example linking permissions to who can open patient records. Answers that only state basic, undeveloped points such as 'the operating system puts files in folders' or 'users have a username and password', with little reference to the practice, are limited to Level 1 (maximum 2 marks).

Do not accept backup, disk defragmentation or anti-malware software as operating system file management, or encryption, as these are outside the operating system's file management; they are utility software or security measures.

Example answers and how they were marked
Full marks6/6

The operating system's file management lets the practice keep each patient's records in folders, and it carries out the saving, moving and deleting of those files, so a dentist can add notes to the right record after an appointment. File management also sets permissions on the shared folders, so receptionists can be given read-only access to appointment details but cannot change clinical notes, while dentists have write access. This reduces the risk of confidential patient records being seen or changed by the wrong staff. User management supports this because the operating system gives every member of staff their own account with a username and password, so anything done to a record can be traced to the person who did it. Accounts can be grouped by role, so when the practice takes on a new dentist the account can be given the same rights as the other dentists quickly rather than setting each permission by hand. When a member of staff leaves, their account can be disabled so they can no longer open patient records. Together this means the practice can share records across reception, dentists and managers while each person only reaches what their role needs.

Why: Level 3: both file management (folders, saving, permissions, read-only access) and user management (accounts, grouping by role, disabling accounts) are covered and developed, with sustained reasoning linking them to the practice's shared records and staff access.

Some marks2/6

File management puts the patient records into folders so they can be found. User management gives each member of staff a username and password so they can log on to the computer.

Why: Level 1: two basic, independent points, one on each area, with little development and little application to how they support the practice, so it is capped by the Level 1 guidance at 2 marks.

Some marks1/6

File management is when the operating system backs up all the files every night. User management is when the computer has a username so it stops viruses.

Why: Level 1 (1 mark): backup is not accepted as operating system file management, but the basic point that a user account has a username is creditworthy; the claim that it stops viruses is not creditworthy.

5Discuss6 marksLow and High Level Languages Swap Remove

A software company is writing a new program that will be sold to users who have different types of computer. The program does not need to control the hardware of the computer directly. The company must decide whether to write the program in a high-level language or a low-level language.

Discuss whether the company should use a high-level language or a low-level language to write this program.

Your answer should consider:

  • machine independence
  • processor specificity
  • how the code is translated for each type of computer.
[6 marks]
Mark scheme

Indicative content

Machine independence

  • A high-level language is machine independent, so the same source code can be run on different types of computer with few or no changes.
  • The company can write the program once and sell it to users with different computers, without rewriting the code for each type of computer.
  • Only one version of the program needs to be written and maintained, so development takes the company less time.

Processor specificity

  • A low-level language is processor-specific, so a program written for one processor will not run on a different processor without being rewritten.
  • Assembly language instructions depend on the instruction set of the particular processor, so the company would need a separate version of the program for each type of computer.
  • Writing a separate low-level version for every type of computer would take the company much longer than writing one high-level program.
  • Low-level code gives direct control of the hardware of one processor, so it is better suited to device drivers than to a program that must run on many different computers.

Translation

  • High-level source code is translated for each type of computer by a compiler or an interpreter, so one version of the source code is enough for all the users.
  • Assembly language is translated into machine code by an assembler, and the assembler produces machine code for one specific processor only.
  • Machine code is already in a form that one particular processor can execute directly, but the same machine code will not run on a different processor.
  • Each high-level statement translates into several machine code instructions, so the programmer does not need to know the instruction set of the processor.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

  • Level 3 responses must cover both high-level machine independence and low-level processor specificity, with the effect on the company's decision.
  • Do not award low-level language, assembly language or machine code as portable, or 'high-level languages are written in English/like English' as a reason for machine independence.
Example answers and how they were marked
Full marks6/6

A high-level language is machine independent, so the company can write the program once and it will run on different types of computer with few or no changes. A different compiler is used for each type of processor to translate that same source code into the machine code for that computer, so the company can sell one program to all of its users. A low-level language is processor-specific, so a program written in assembly for one processor will not run on a different one. The assembler produces machine code for one particular instruction set, so the company would need to write a separate version for each type of computer, which would take much longer. As the program does not need to control the hardware directly, the company should use a high-level language.

Why: Develops high-level machine independence with the compiler translating for each processor, and low-level processor specificity with the assembler producing machine code for one instruction set, both applied to the company's decision, in a coherent and sustained argument: Level 3, 6 marks.

Some marks3/6

A high-level language is machine independent, so the company can write the program once. A different compiler is used for each type of computer to translate the code, so users with different computers can all run the same program. A low-level language is processor-specific, so it would not be as suitable for the company.

Why: Machine independence is linked to the compiler and applied to the users, but processor specificity is only asserted and no translation of low-level code is given, so the reasoning is not sustained: Level 2, 3 marks.

Some marks1/6

High-level languages are machine independent because they are written in English, so the company can sell the program to anyone. Low-level languages are machine code, so they can be translated to run on any type of computer.

Why: One basic point that high-level languages are machine independent, applied by selling to anyone (1). 'Written in English' is not a reason for machine independence and low-level code is not portable, so neither is credited: Level 1, 1 mark.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.