Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 604 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 15 marks

Pick again
Print
1Short recall1 markUnits & Conversion Swap Remove

A file has a size of 2 kibibytes.

State the number of bytes in the file.

[1 mark]
Mark scheme

Award one mark for:

  • 2048 (1)
  • 2 × 1024 (1)
  • 2^11 (1)

Allow 2048 bytes.

Do not accept 2000, which is the number of bytes in two decimal kilobytes.

Do not accept 1024, which is the number of bytes in one kibibyte.

Do not accept 16, which is the number of bits in two bytes.

Example answers and how they were marked
Full marks1/1

2048

Why: 2048 is 2 × 1024, the number of bytes in 2 kibibytes (1).

No marks0/1

2000

Why: 2000 uses the decimal kilobyte, not the binary kibibyte; the mark scheme does not accept it.

No marks0/1

16

Why: 16 is the number of bits in two bytes, confusing bits with bytes; the mark scheme does not accept it.

2Describe2 marksLow and High Level Languages Swap Remove

A device driver is software that allows the operating system to control a piece of hardware. Device drivers are often written in a low-level programming language.

Describe one reason why a low-level programming language is suitable for writing a device driver.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Instructions can manipulate/control the hardware/memory/registers directly (1) so the driver can control the specific device it is written for (1)
  • The code is written for one specific processor/architecture (1) so it works with the exact hardware it will control (1)
  • The programmer controls exactly how memory/registers are used (1) so the code is efficient and needs little memory, which suits a device that has limited memory (1)
  • Each instruction maps to one machine code instruction (1) so the driver code is small enough to fit in the memory of the device (1)

Extra detail, such as naming the device the driver controls, is not needed to earn the marks.

Do not accept 'it is closer to machine code' on its own: it must be developed to show how this helps the driver, e.g. it can control the hardware directly.

Do not accept 'it is faster/quicker' with no link to the hardware/device, e.g. the device responds quickly.

Do not accept 'it is easier to learn', 'it is easier to debug' or 'it takes less time to write'.

Example answers and how they were marked
Full marks2/2

Low-level instructions can manipulate the hardware and memory directly (1) so the driver can control the specific device it was written for, such as a sound card (1).

Why: Point about direct control of hardware/memory (1) linked to controlling the specific device (1). The named device is extra detail and is not needed.

Some marks1/2

Low-level instructions can manipulate the hardware directly.

Why: Correct point (1) but no linked development saying how this helps the device driver.

No marks0/2

It is closer to machine code so it runs faster than a high-level language.

Why: 'Closer to machine code' is not developed into how this helps the driver, and 'runs faster' is not linked to the hardware/device, so no mark.

3Discuss6 marksUtility Software Swap Remove

A small graphic design company keeps all of its project files on one desktop computer. The computer's hard disk has failed and some files have been lost. The owner has been told to use backup software.

Discuss the backup strategy the company should use.

Your answer should include:

  • the types of backup that could be used
  • where and how often backups should be made
  • how the backups would be used if the hard disk failed again.
[6 marks]
Mark scheme

Indicative content

Types of backup that could be used

  • A full backup copies all of the company's project files every time it is run, so the whole set of files is held together in one backup.
  • A full backup takes longer to make and needs more storage space than an incremental backup.
  • An incremental backup copies only the files that have changed since the previous backup, so it is quicker to run each evening.
  • Restoring from incremental backups needs the last full backup plus every incremental backup made since, which takes longer and is more complex.
  • A weekly full backup with nightly incremental backups can be suitable for the company when the reason is explained using the properties of the two types.

Where and how often backups should be made

  • Backups should be kept on a separate device and, ideally, at a different location, so that a fire or theft in the office cannot destroy the computer and the backups together.
  • Backups should be made regularly, for example every evening, so that at most one day's design work would be lost.
  • Cloud storage can hold copies off-site automatically, without the owner taking a disk home.
  • An external hard disk or USB flash drive can be used as the backup medium, with a copy kept away from the office.

How the backups would be used if the hard disk failed again

  • If the hard disk fails again, the backup software is used to restore the latest full backup and any later incremental backups onto a replacement disk.
  • The restored project files allow the company to carry on working and meet its clients' deadlines.
  • The backups should be tested by restoring a file so that the company knows the backup is usable before it is needed.
  • Backup software does not repair the failed hard disk itself, so a replacement disk is still needed.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Level 3 requires all three bullets to be developed and applied, including both types of backup (or a justified combination) and a restoration sequence; a response that describes only a full backup cannot reach Level 3.

An answer that explains only one type of backup with at most a brief location or frequency point and no developed restoration is Level 1 (1–2 marks). Credit one off-site point only: cloud storage, an external disk kept elsewhere and 'a different location' are the same point. Do not accept that backup software repairs a failed hard disk or recovers files that were never backed up; an answer that only makes this claim is Level 0. An unsupported weekly-full/nightly-incremental recommendation is not credited.

Example answers and how they were marked
Full marks6/6

The company should make a full backup once a week and incremental backups every evening. A full backup copies every project file, so the whole set is held in one place, but it takes a long time and a lot of space. An incremental backup copies only the files that have changed since the last backup, so it is quick enough to run each night. The backups should be copied to an external hard disk that the owner takes home, or uploaded to cloud storage, so that a fire or a theft cannot destroy the computer and the backups together. Backing up every evening means that at most one day's design work would be lost. If the hard disk fails again, the backup software is used to restore the latest full backup and then each incremental backup onto a new disk, so the company can carry on meeting its clients' deadlines.

Why: Level 3: full and incremental backups are explained and applied to a weekly and nightly schedule (AO1); off-site storage and the restore sequence onto a replacement disk are developed and clearly tied to the hard disk failure (AO2).

Some marks2/6

The company should back up its files to an external hard disk. A full backup copies all of the files, so the project files can be restored if the hard disk fails again. The backup should be kept in a different room in case there is a fire.

Why: Level 1: names a full backup and briefly links it to restoring files, and gives a weak location point, but there is no incremental backup, frequency or developed restore sequence, so the points remain basic and independent.

No marks0/6

Backup software repairs the hard disk when it fails, so the company will not lose anything and can open the files again.

Why: Level 0: the only claim is that backup software repairs the failed hard disk and prevents all loss, which the mark scheme does not accept; no valid type, location, frequency or restoration point is made.

4Discuss6 marksTranslators Swap Remove

A company writes a photo editing program in a high-level language. The company will sell the finished program to customers. Each customer will install the program on their own computer and run it many times.

Discuss whether the company should use a compiler or an interpreter to translate the program before it is sold.

Your answer should include:

  • the output of each type of translator
  • whether the program has to be translated each time it is run
  • what the customer needs on their computer to run the program.
[6 marks]
Mark scheme

Indicative content

The output of each type of translator

  • A compiler translates the whole program in one go and produces object code.
  • The object code is saved as an executable file, which is already in machine code so the processor can run it directly.
  • An interpreter does not produce object code, so no translated file exists for the company to save and sell.
  • An interpreter translates one line at a time and executes it immediately, but that translation is not kept.

Whether the program has to be translated each time it is run

  • Compiled code is translated once, so the executable can be run as many times as the customer likes without being translated again.
  • If the source code is edited, the whole program has to be compiled again to produce a new executable.
  • An interpreted program is translated again every time it is run, so a customer who runs the program often waits for translation at every run.
  • An executable runs faster than interpreted code because it is already in machine code.

What the customer needs on their computer to run the program

  • A customer who installs the executable needs no compiler on their computer, so the program will run straight away.
  • If the company supplied the source code instead, the customer would need an interpreter installed, and it would have to be an interpreter for their type of computer.
  • A customer given only the executable does not have the source code, so cannot change the program.

Conclusion

  • A compiler is the better choice for this company, because the executable can be sold and the customer runs it without it being translated again and without being given the source code.
  • Using an interpreter would mean supplying the source code to customers and translating the program on every run.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Level 3 responses must cover all three bullets for this company's program, including translating once rather than on every run, and reach a conclusion.

Do not accept 'a compiler fixes errors' (a compiler reports syntax errors at the end of translation, it does not fix them) or 'a compiler is easier to use' with no link to output, translation or the customer. Do not accept answers about translating to assembly language.

Example answers and how they were marked
Full marks6/6

The company should use a compiler. A compiler translates the whole program in one go and produces object code, which is saved as an executable file. This executable is already in machine code, so the customer's processor can run it directly. The program is translated only once, so a customer who runs the program many times does not wait for it to be translated again, and it runs faster than interpreted code would. An interpreter produces no object code, so the company would have nothing to sell as an executable. The customer would have to be given the source code and would need an interpreter installed on their computer, and the program would be translated again every time it was run.

Why: Level 3. Covers the output of both translators (executable from the compiler, no object code from the interpreter), the effect of translating once rather than on every run, and what the customer needs on their computer, all applied to the company selling the program, with a clear conclusion.

Some marks3/6

A compiler produces an executable file, which the company can save and sell to its customers. An interpreter does not produce an executable file, so the customer would need the source code and an interpreter installed on their computer to run the program. This means a compiler is better for the company, because customers can just run the file they are given.

Why: Level 2. Gives the output of both translators and links this to what the customer needs, with a conclusion, but never says the compiled program is translated once while an interpreted one is translated on every run, so the reasoning is not developed enough for Level 3.

No marks0/6

The company should use a compiler because it is easier to write programs with a compiler and it fixes the errors in the program before the customers get it.

Why: Level 0. No creditworthy point: 'easier to write programs' is not linked to the output, the translation each run or the customer, and 'fixes the errors' is a misconception, as the mark scheme's guidance says a compiler only reports errors at the end of translation.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.