Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 573 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

5 questions · 13 marks

Pick again
Print
1Short recall1 markUnits & Conversion Swap Remove

A file has a size of 2 kibibytes.

State the number of bytes in the file.

[1 mark]
Mark scheme

Award one mark for:

  • 2048 (1)
  • 2 × 1024 (1)
  • 2^11 (1)

Allow 2048 bytes.

Do not accept 2000, which is the number of bytes in two decimal kilobytes.

Do not accept 1024, which is the number of bytes in one kibibyte.

Do not accept 16, which is the number of bits in two bytes.

Example answers and how they were marked
Full marks1/1

2048

Why: 2048 is 2 × 1024, the number of bytes in 2 kibibytes (1).

No marks0/1

2000

Why: 2000 uses the decimal kilobyte, not the binary kibibyte; the mark scheme does not accept it.

No marks0/1

16

Why: 16 is the number of bits in two bytes, confusing bits with bytes; the mark scheme does not accept it.

2Describe2 marksUtility Software Swap Remove

A small business stores its customer records on a computer.

Describe the purpose of backup software.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Makes a copy/duplicate of the files/data (1) and stores it on a separate storage device/at a different location (1)
  • Copies the data at regular intervals (1) so a recent version is available if the original is lost (1)
  • Keeps a copy of the files (1) so that the data can be restored after the original is deleted/corrupted (1)
  • Stores the copies on another device (1) so the data is not lost if the original device fails/is damaged by a fire or flood (1)

Do not accept 'it backs up the files' on its own, as this repeats the question.

Do not accept responses about repairing corrupted files or removing malware, as these are different utility programs.

Example answers and how they were marked
Full marks2/2

It makes a copy of the data and saves it on a separate storage device (1) so that the records can be restored if the original files are deleted or the computer fails (1).

Why: The point (1) and a linked development giving the purpose of the copy (1).

Some marks1/2

It makes a copy of the files and saves it on another disk.

Why: The point and location are given (1), but there is no development saying what the copy is used for, so no second mark.

No marks0/2

It repairs damaged files so that they can be opened again by the program.

Why: This describes file repair software, which the mark scheme does not accept for this question.

3Describe2 marksLow and High Level Languages Swap Remove

A programmer has written a program in assembly language.

Describe why it is necessary to translate the program into machine code before it can be run.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • The processor/CPU can only execute machine code/binary instructions (1) so the assembly instructions must be converted into machine code before the program can run (1)
  • Each assembly instruction/mnemonic matches/corresponds to one machine code instruction (1) so each line must be replaced with the machine code the processor executes (1)
  • The program is written using mnemonics (1) that must be translated into machine code for the processor to carry out the instructions (1)
  • The hardware/processor does not understand assembly language directly (1) so it must be translated into machine code that the processor can execute (1)

Do not accept 'assembly language is a low-level language'.

Do not accept 'it is hard to understand' or 'it is not English'.

Do not accept benefits, such as 'machine code runs faster' or 'the program will run more quickly'.

Do not accept 'an assembler/a translator converts it' on its own, with no reference to the processor only being able to execute machine code/binary.

Do not accept responses about high-level languages or about compilers/interpreters.

Example answers and how they were marked
Full marks2/2

The processor can only execute machine code, so the assembly instructions must be converted into machine code before the program can run.

Why: States what the processor can execute (1) and links it to converting the program's instructions into machine code (1).

Some marks1/2

Each assembly instruction matches one machine code instruction.

Why: Correct point about the one-to-one match (1) but no development saying that this is because the processor only executes machine code.

No marks0/2

Because an assembler translates assembly language into machine code.

Why: Names the translator but gives no reason tied to the processor only being able to execute machine code, so no mark; this is in the 'Do not accept' guidance.

4Explain2 marksPacket Switching Swap Remove

A file is sent across the internet in packets.

Explain why packets from the same file may take different routes.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Each router chooses the best route at the time (1) so when a route becomes busy/congested or fails, later packets are forwarded along a different path (1)
  • Routers forward each packet separately (1) so the path a packet takes depends on the traffic conditions when that packet arrives (1)
  • A router may send a packet to a different next router (1) if its routing table shows a better/less congested route for that packet (1)
  • Traffic on the internet changes (1) so no single path is kept for the file and each packet can use whichever route is best when it is sent (1)

For both marks, the expansion must follow/associate with the statement.

Allow reference to a routing table, or to how a router decides the route, as part of the linked reason.

Do not accept 'the packets have different IP addresses' because all packets from the same file have the same destination IP address, even though their routes can differ.

Do not accept 'the internet is busy' or 'there is a lot of traffic' on its own without linking this to the router choosing a different route.

Do not accept 'different routers send the packets' on its own without a reason why a different router/route is chosen.

Do not accept an answer that only says the packets take different routes without explaining why.

Example answers and how they were marked
Full marks2/2

Each router chooses the best route at the time, so if one route becomes busy or fails, later packets are sent a different way.

Why: Linked point (1) that each router chooses the best route at the time and reason (1) that a busy or failed route means later packets take a different path.

Some marks1/2

Routers send packets along the least congested route.

Why: States that a router chooses the least congested route (1) but gives no linked reason why this makes the packets from the file take different routes.

No marks0/2

Because each packet is given a different IP address so they go to different places.

Why: Misconception named in the mark scheme: all packets from the same file share the same destination IP address, even though their routes can differ.

5Discuss6 marksUtility Software Swap Remove

A small graphic design company keeps all of its project files on one desktop computer. The computer's hard disk has failed and some files have been lost. The owner has been told to use backup software.

Discuss the backup strategy the company should use.

Your answer should include:

  • the types of backup that could be used
  • where and how often backups should be made
  • how the backups would be used if the hard disk failed again.
[6 marks]
Mark scheme

Indicative content

Types of backup that could be used

  • A full backup copies all of the company's project files every time it is run, so the whole set of files is held together in one backup.
  • A full backup takes longer to make and needs more storage space than an incremental backup.
  • An incremental backup copies only the files that have changed since the previous backup, so it is quicker to run each evening.
  • Restoring from incremental backups needs the last full backup plus every incremental backup made since, which takes longer and is more complex.
  • A weekly full backup with nightly incremental backups can be suitable for the company when the reason is explained using the properties of the two types.

Where and how often backups should be made

  • Backups should be kept on a separate device and, ideally, at a different location, so that a fire or theft in the office cannot destroy the computer and the backups together.
  • Backups should be made regularly, for example every evening, so that at most one day's design work would be lost.
  • Cloud storage can hold copies off-site automatically, without the owner taking a disk home.
  • An external hard disk or USB flash drive can be used as the backup medium, with a copy kept away from the office.

How the backups would be used if the hard disk failed again

  • If the hard disk fails again, the backup software is used to restore the latest full backup and any later incremental backups onto a replacement disk.
  • The restored project files allow the company to carry on working and meet its clients' deadlines.
  • The backups should be tested by restoring a file so that the company knows the backup is usable before it is needed.
  • Backup software does not repair the failed hard disk itself, so a replacement disk is still needed.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Level 3 requires all three bullets to be developed and applied, including both types of backup (or a justified combination) and a restoration sequence; a response that describes only a full backup cannot reach Level 3.

An answer that explains only one type of backup with at most a brief location or frequency point and no developed restoration is Level 1 (1–2 marks). Credit one off-site point only: cloud storage, an external disk kept elsewhere and 'a different location' are the same point. Do not accept that backup software repairs a failed hard disk or recovers files that were never backed up; an answer that only makes this claim is Level 0. An unsupported weekly-full/nightly-incremental recommendation is not credited.

Example answers and how they were marked
Full marks6/6

The company should make a full backup once a week and incremental backups every evening. A full backup copies every project file, so the whole set is held in one place, but it takes a long time and a lot of space. An incremental backup copies only the files that have changed since the last backup, so it is quick enough to run each night. The backups should be copied to an external hard disk that the owner takes home, or uploaded to cloud storage, so that a fire or a theft cannot destroy the computer and the backups together. Backing up every evening means that at most one day's design work would be lost. If the hard disk fails again, the backup software is used to restore the latest full backup and then each incremental backup onto a new disk, so the company can carry on meeting its clients' deadlines.

Why: Level 3: full and incremental backups are explained and applied to a weekly and nightly schedule (AO1); off-site storage and the restore sequence onto a replacement disk are developed and clearly tied to the hard disk failure (AO2).

Some marks2/6

The company should back up its files to an external hard disk. A full backup copies all of the files, so the project files can be restored if the hard disk fails again. The backup should be kept in a different room in case there is a fire.

Why: Level 1: names a full backup and briefly links it to restoring files, and gives a weak location point, but there is no incremental backup, frequency or developed restore sequence, so the points remain basic and independent.

No marks0/6

Backup software repairs the hard disk when it fails, so the company will not lose anything and can open the files again.

Why: Level 0: the only claim is that backup software repairs the failed hard disk and prevents all loss, which the mark scheme does not accept; no valid type, location, frequency or restoration point is made.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.