Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 530 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 12 marks

Pick again
Print
1Short recall2 marksUnits & Conversion Swap Remove

Data storage is measured in binary multiples.

Define the term bit.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • A binary digit (1)
  • Has the value 0 or 1 (1)
  • The smallest unit of data storage (1)
  • A single 0 or 1 (1)

Allow binary digit/binary place value for binary digit

Allow a single binary digit for a single 0 or 1

Do not accept a group of 8 bits/half a nibble of 4 bits, which describe a byte or a nibble

Do not accept a binary number/binary on its own

Example answers and how they were marked
Full marks2/2

A binary digit that can have the value 0 or 1.

Why: A binary digit (1) and has the value 0 or 1 (1).

Some marks1/2

It is the smallest unit of data storage.

Why: Smallest unit of data storage (1), but does not state that it is a binary digit or that it has the value 0 or 1.

No marks0/2

A group of 8 bits.

Why: Describes a byte, not a bit; no creditworthy point and named in the Do not accept line.

2Describe2 marksUtility Software Swap Remove

A small business stores its customer records on a computer.

Describe the purpose of backup software.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Makes a copy/duplicate of the files/data (1) and stores it on a separate storage device/at a different location (1)
  • Copies the data at regular intervals (1) so a recent version is available if the original is lost (1)
  • Keeps a copy of the files (1) so that the data can be restored after the original is deleted/corrupted (1)
  • Stores the copies on another device (1) so the data is not lost if the original device fails/is damaged by a fire or flood (1)

Do not accept 'it backs up the files' on its own, as this repeats the question.

Do not accept responses about repairing corrupted files or removing malware, as these are different utility programs.

Example answers and how they were marked
Full marks2/2

It makes a copy of the data and saves it on a separate storage device (1) so that the records can be restored if the original files are deleted or the computer fails (1).

Why: The point (1) and a linked development giving the purpose of the copy (1).

Some marks1/2

It makes a copy of the files and saves it on another disk.

Why: The point and location are given (1), but there is no development saying what the copy is used for, so no second mark.

No marks0/2

It repairs damaged files so that they can be opened again by the program.

Why: This describes file repair software, which the mark scheme does not accept for this question.

3Explain2 marksProtocols & Layers Swap Remove

Two computers exchange data over a network.

Explain why network protocols are needed for the two computers to communicate.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Devices (can) understand/interpret the data they receive (1) because they follow the same set of rules for communication (1)
  • Data is sent in an agreed format/structure (1) so the receiving device can interpret/understand it correctly (1)
  • Devices (can) connect/communicate successfully (1) because they agree how the data is transmitted, such as the type of signal used (1)
  • Errors (can) be detected/handled (1) because both devices follow the same rules for checking the data (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'so devices can talk/communicate with each other' or 'so they can understand each other' without saying they follow the same rules/agreed format.

Do not accept an answer that only states protocols are a set of rules, without saying what this allows (e.g. the data can be understood/interpreted).

Do not accept a faster connection/speed as a reason why protocols are needed.

Do not accept naming a protocol (e.g. TCP/IP, HTTP, Wi-Fi) without an explanation of why it is needed.

Do not accept a description of what a protocol does (e.g. 'TCP splits data into packets') without saying why this is needed.

Example answers and how they were marked
Full marks2/2

Devices can understand the data they receive (1) because they follow the same set of rules for communication (1).

Why: Linked point (1) and reason (1): following the same rules is what lets the devices understand the data.

Some marks1/2

Data is sent in an agreed format (1).

Why: Point (1) identified, but no linked reason saying what the agreed format achieves.

No marks0/2

Protocols are needed so the connection is faster (0) because more data can be sent at once.

Why: Speed is not a reason protocols are needed, so there is no creditworthy point or linked reason.

4Discuss6 marksLow and High Level Languages Swap Remove

A company is developing the firmware for a robotic vacuum cleaner. The firmware must read the distance sensors and control the motors. The vacuum cleaner has a small amount of memory.

Discuss the characteristics of a low-level programming language that make it suitable for writing the firmware.

Your answer should include:

  • control of the hardware
  • the efficiency of the code
  • the link between the language and the processor.
[6 marks]
Mark scheme

Indicative content

Control of the hardware

  • Low-level languages can read and write the contents of registers and memory addresses directly, so the firmware can take the values from the distance sensors without calling a library routine.
  • Assembly language instructions can read from and write to specific input/output ports on the vacuum cleaner's processor, so the motors can be switched on and off directly.
  • The programmer decides exactly which processor operations are carried out and in which order, which matters when the vacuum must reverse away from a step or an obstacle.
  • A low-level language puts nothing between the program and the hardware, so the programmer can control the hardware of the vacuum cleaner precisely.

Efficiency of the code

  • Assembly language code can be hand-optimised instruction by instruction, so the code that checks a sensor is as short as possible.
  • The programmer can choose which registers hold values that are used again and again, which cuts down the number of memory accesses the firmware needs.
  • A hand-written low-level program can be made compact, so it is more likely to fit in the small amount of memory the vacuum cleaner has.
  • Because each instruction does one defined job, the time taken to react to a sensor reading is predictable, which suits firmware that must not overrun.

Link between the language and the processor

  • Low-level languages are processor-specific, so the instructions used are those of the exact processor in the vacuum cleaner rather than general statements that need translating.
  • Each assembly language instruction maps to one machine code instruction, so the programmer knows precisely which processor operation will be carried out by each line of code.
  • An assembler turns each mnemonic into its machine code equivalent, so the machine code running on the vacuum cleaner's processor is exactly what the programmer wrote.
  • Code written for a different processor would have to be rewritten, which is acceptable here because the vacuum cleaner always uses the same processor.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Within Level 1, award 1 mark for a single basic point and 2 marks for two or more independent basic points; Level 2 requires the points to be linked to the vacuum cleaner; Level 3 requires both control of the hardware and efficiency of the code, and a few concise, linked sentences can reach Level 3, so extra length is not required.

Accept registers, memory addresses, input/output ports, machine code and mnemonics as ways of describing access to the hardware, and accept 'a low-level language is faster' as a basic point on its own. Do not award 'binary is a low-level language' (machine code is written in binary, but binary is not a language), or characteristics of high-level languages such as being easy to read or portable, as characteristics of a low-level language.

Example answers and how they were marked
Full marks6/6

A low-level language can read and write to registers and to input/output ports directly, so the firmware can take the distance sensor readings and switch the motors without needing library routines. It can be hand-optimised instruction by instruction, so the code that checks a sensor is short and the time it takes is predictable, and a compact program is more likely to fit in the vacuum cleaner's small memory. The language is processor-specific and each assembly instruction maps to one machine code instruction, so the programmer knows exactly which operation the vacuum's processor will carry out, and the assembled machine code is exactly what they wrote.

Why: Covers all three bullets: direct control of registers and ports applied to the sensors and motors, hand-optimised compact code with predictable timing applied to the small memory, and the one-to-one link to the processor's own instruction set. Linked and applied throughout, so Level 3.

Some marks2/6

A low-level language can control the hardware directly. It can read the sensors and control the motors. It is also faster than a high-level language, so the vacuum responds quickly. This is useful because it has little memory.

Why: Three basic, independent points: direct control of the hardware applied to the sensors and motors, faster execution, and suitability for limited memory. They are asserted without development (no registers, ports or predictable timing) and the link between the language and the processor is missing, so Level 1, two or more basic points (2).

Some marks1/6

A low-level language is written in binary, so the computer can understand it directly. It is faster than a high-level language.

Why: 'Faster than a high-level language' is a creditworthy basic point (1). 'Written in binary' is not awarded, as binary itself is not a language and the do-not-award rule applies. Only one undeveloped point with no application to the vacuum cleaner, so Level 1, single basic point (1).

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.