Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 604 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 8 marks

Pick again
Print
1Short recall2 marksCompression Swap Remove

Files can be compressed before they are stored.

Define the term lossless compression.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Reduces/makes the size of a file smaller (1)
  • No data is lost/removed (during compression) (1)
  • The original file/data can be recreated/restored exactly (1)

Allow 'the compressed file takes up less storage space' for the first mark.

The second and third bullets are two ways of making the same point: award a maximum of one mark for them, so a response that says no data is lost and that the original file can be restored, but does not say the file is smaller, scores one mark.

Do not accept descriptions of lossy compression, e.g. 'it removes data that is not needed to make the file smaller'.

Ignore reference to download/transmission times, bandwidth and streaming, as these are benefits of compression and not part of the definition.

Example answers and how they were marked
Full marks2/2

Lossless compression reduces the size of a file without permanently removing any data, so the original file can be restored exactly.

Why: Reduces the size of a file (1) and no data is lost, so the original can be restored exactly (1); maximum of two marks reached.

Some marks1/2

It makes a file smaller so it downloads more quickly.

Why: Reduces the size of a file (1); the faster download is ignored as a benefit, not part of the definition.

No marks0/2

It removes data that is not needed to make the file smaller.

Why: Describes lossy compression, which the do-not-accept line rules out, so the mention of making the file smaller is not credited.

2Describe2 marksUtility Software Swap Remove

A student has a large number of photographs stored on a computer.

Describe the purpose of data compression software.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Makes a file/files smaller (1) so less storage space is needed on the disk (1)
  • Reduces the size of the data (1) so it takes less time to upload/download/transfer the file (1)
  • Compresses files/folders into a single file (1) so an attachment is under the size limit for email (1)
  • Reduces the size of the files (1) so more of them fit onto a storage device/backup media (1)

Do not accept 'it compresses the files' on its own, as this repeats the question.

Do not accept responses about protecting files from malware/viruses or about deleting files.

Example answers and how they were marked
Full marks2/2

It makes the files smaller (1) so that they use less storage space on the computer and more of them fit on the disk (1).

Why: The point (1) and a linked development giving the benefit (1).

Some marks1/2

It makes files smaller.

Why: This is the point (1) but there is no development of what the smaller size leads to, so only one mark.

No marks0/2

It protects the files from viruses so that they cannot be damaged.

Why: This describes anti-malware software, which the mark scheme does not accept; no creditworthy point is made.

3Describe2 marksLow and High Level Languages Swap Remove

A device driver is software that allows the operating system to control a piece of hardware. Device drivers are often written in a low-level programming language.

Describe one reason why a low-level programming language is suitable for writing a device driver.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Instructions can manipulate/control the hardware/memory/registers directly (1) so the driver can control the specific device it is written for (1)
  • The code is written for one specific processor/architecture (1) so it works with the exact hardware it will control (1)
  • The programmer controls exactly how memory/registers are used (1) so the code is efficient and needs little memory, which suits a device that has limited memory (1)
  • Each instruction maps to one machine code instruction (1) so the driver code is small enough to fit in the memory of the device (1)

Extra detail, such as naming the device the driver controls, is not needed to earn the marks.

Do not accept 'it is closer to machine code' on its own: it must be developed to show how this helps the driver, e.g. it can control the hardware directly.

Do not accept 'it is faster/quicker' with no link to the hardware/device, e.g. the device responds quickly.

Do not accept 'it is easier to learn', 'it is easier to debug' or 'it takes less time to write'.

Example answers and how they were marked
Full marks2/2

Low-level instructions can manipulate the hardware and memory directly (1) so the driver can control the specific device it was written for, such as a sound card (1).

Why: Point about direct control of hardware/memory (1) linked to controlling the specific device (1). The named device is extra detail and is not needed.

Some marks1/2

Low-level instructions can manipulate the hardware directly.

Why: Correct point (1) but no linked development saying how this helps the device driver.

No marks0/2

It is closer to machine code so it runs faster than a high-level language.

Why: 'Closer to machine code' is not developed into how this helps the driver, and 'runs faster' is not linked to the hardware/device, so no mark.

4Explain2 marksProtocols & Layers Swap Remove

The TCP/IP model has four layers.

Explain one function of the transport layer when a file is sent over a network.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Splits the data/file into packets (1) so each packet can be sent separately across the network (1)
  • Adds a packet/sequence number to each packet (1) so the packets can be put back into the correct order at the destination (1)
  • Detects lost/missing packets (1) so they can be requested/resent (1)
  • Creates a connection between the two computers/hosts (1) before the file is sent (1)

For both marks, the expansion must follow/associate with the statement.

Allow 'segments' for 'packets' (TCP divides the data into segments, which become packets at the internet layer).

Do not accept 'sends the data/file' on its own without saying what the transport layer does to the data.

Do not accept naming TCP or a port number on its own without expansion.

Do not accept routing/addressing packets using IP addresses, which is the internet layer.

Example answers and how they were marked
Full marks2/2

The transport layer splits the data into packets (1) so each packet can be sent separately across the network (1).

Why: Linked point (1) and reason (1): splitting into packets lets each one be sent separately.

Some marks1/2

It splits the data into packets (1).

Why: Point (1) identified, but no linked reason given, so only the first mark is awarded.

No marks0/2

It routes the packets using IP addresses (0) so they reach the right destination.

Why: Routing using IP addresses is the internet layer, not the transport layer, so no credit is given.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 18
Data Protection Act 14 questions Impact of AI 4 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.