Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 631 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 11 marks

Pick again
Print
1Multiple choice1 markCompression Swap Remove

Identify one reason for using data compression.

[1 mark]
  • ATo increase the number of packets sent
  • BTo reduce the time taken to transmit a file
  • CTo improve the quality of the file
  • DTo make the file harder to open
Mark scheme
  • B To reduce the time taken to transmit a file (1)
  • The only correct answer is B. The correct answer is to reduce the time taken to transmit a file.
  • A is not correct because compression reduces file size, which can reduce the number of packets sent
  • C is not correct because lossy compression can reduce the quality of a file
  • D is not correct because encryption, not compression, can make a file harder to open
Example answers and how they were marked
Full marks1/1

B To reduce the time taken to transmit a file

Why: Correct option (1).

No marks0/1

A To increase the number of packets sent

Why: Near miss: compression reduces the number of packets sent, so no mark.

No marks0/1

C To improve the quality of the file

Why: Misconception that compression improves quality; no mark.

2Short recall2 marksCharacter Sets Swap Remove

ASCII is a character set that uses 7 bits to represent each character.

Give two limitations of 7-bit ASCII when it is used to represent text.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • (Only) 128 different characters can be represented / 7 bits give 2^7 = 128 different codes (1)
  • It cannot represent characters from languages other than English / non-English alphabets, e.g. Greek, Chinese (1)
  • It cannot represent accented characters, e.g. é, ñ (1)
  • It cannot represent symbols or emoji that are not in the ASCII character set (1)

Award a maximum of one mark for the last three bullets, as they are all examples of characters that fall outside the 128 ASCII codes.

Allow 'it can only represent 128 characters, so some characters are missing' for the first bullet.

Do not accept 'it uses 7 bits' / 'it only uses 7 bits' on its own, without saying what this limits.

Do not accept 'it can only store a limited amount of text' / 'it can only store short messages', as 7 bits limits the number of characters available, not the length of a message.

Do not accept 'it can only represent the characters in the ASCII character set', as this repeats the question.

Do not accept 'it is old/out of date' or 'it cannot store numbers'.

Example answers and how they were marked
Full marks2/2

Only 128 different characters can be represented, so it cannot store characters from other languages such as Greek.

Why: 128 character limit (1) and characters from other languages (1); two separate creditworthy limitations.

Some marks1/2

It cannot show accented characters like é and it only uses 7 bits.

Why: Accented characters (1); 'only uses 7 bits' is not qualified, so scores 0.

No marks0/2

It only uses 7 bits, so it can only store a small amount of text.

Why: Scores 0: text length is not a limitation of 7-bit ASCII, and 'only uses 7 bits' is unqualified; both Do not accept lines apply.

3Describe2 marksUser Management Swap Remove

An operating system manages the users of a computer.

Describe how an operating system checks that a user is allowed to log in.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • The user enters a username/user ID and password/PIN (1) which is compared with the account details the operating system has stored (1)
  • The operating system keeps a file/list/database of users and their passwords (1) to check the login details the user enters against (1)
  • The operating system compares the entered details with the details stored for that user (1) and if they do not match, access is refused/denied (1)
  • The entered details are checked against the access rights stored for that user (1) so access is only allowed when the details are correct (1)

Do not award for 'it asks for a password' on its own, without saying what the password is checked against.

A stored list/file of users and passwords with no check of the login details earns one mark only.

Do not accept responses about file management, such as finding or opening the user's files.

Example answers and how they were marked
Full marks2/2

The user types in a username and password. The operating system compares these with the details it has stored for that account, and if they match the user is allowed to log in.

Why: Username and password entered (1) which is compared with the account details the operating system has stored (1).

Some marks1/2

The operating system has a list of all the users and their passwords.

Why: The stored list of users and passwords (1), but no check of the login details against it, so the development mark is not earned (0); the mark scheme states a list alone earns one mark only.

No marks0/2

The operating system finds the user's files on the hard drive and opens the last one they saved.

Why: Describes file management, not checking a user's login details; the mark scheme says not to accept responses about file management, so there is no creditworthy point.

4Discuss6 marksPrimary Memory Swap Remove

A school is buying new computers for its IT room. The computers the technician has ordered have 16 GB of RAM and a large hard drive.

Discuss why main memory (RAM) is needed for programs to run on these computers.

Your answer should include:

  • the role of RAM in the stored program concept
  • what happens to a program when it is opened
  • why the CPU cannot execute a program directly from secondary storage.
[6 marks]
Mark scheme

Indicative content

the role of RAM in the stored program concept

  • In the von Neumann stored program concept, a program's instructions and the data it uses are held together in main memory.
  • RAM holds the instructions and data of the program that the CPU is currently processing.
  • The CPU fetches each instruction from RAM during the fetch-decode-execute cycle, so a program must be in RAM before it can be run.
  • RAM is directly accessible by the CPU, so instructions can be fetched quickly enough for the CPU to keep working.

what happens to a program when it is opened

  • When a program is opened, a copy of its instructions and data is transferred from secondary storage, such as the hard drive, into RAM.
  • The operating system loads the program into RAM so that the CPU can start fetching and executing its instructions.
  • When the program is closed, it is removed from RAM, and the space it used is free for another program.
  • If a computer does not have enough RAM, the program may not open, or another open program has to be closed first.

why the CPU cannot execute a program directly from secondary storage

  • Secondary storage, such as a hard disk drive, is much slower to access than RAM.
  • The CPU can process instructions much faster than secondary storage can supply them, so the CPU would have to wait and would not be working at full speed.
  • RAM is fast electronic memory with no moving parts, so data can be read from it in a fraction of the time taken by a magnetic hard disk drive.
  • Running the school's programs directly from secondary storage would make the computers in the IT room very slow to use.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

  • Level 3 responses must cover both the role of RAM in the stored program concept and the speed difference between RAM and secondary storage, with a reason such as the CPU having to wait for instructions.
  • Answers that make only basic, independent points, such as what RAM is, that a program is copied into RAM when it is opened, or that RAM is faster than a hard drive, without linking them to explain why the CPU would have to wait for instructions, are limited to Level 1.
  • Do not accept statements that RAM is permanent storage, that RAM replaces secondary storage, or that secondary storage is read-only.
Example answers and how they were marked
Full marks6/6

The computers need RAM because of the von Neumann stored program concept, in which the instructions of a program and the data it uses are both held in main memory. When a student opens a program on one of the new computers, the operating system copies it from the hard drive into RAM. The CPU then fetches each instruction from RAM in the fetch-decode-execute cycle, so the program must be in RAM before it can be run. The CPU cannot execute a program directly from secondary storage because a hard disk drive is much slower than RAM. It has moving parts and a much lower transfer rate, so the CPU would often have nothing to do while it waited for the next instruction. RAM is fast electronic memory that the CPU can read directly, which is why 16 GB of RAM lets the school run several programs at once and still keep the CPU working at full speed.

Why: Comprehensive understanding: the stored program concept is explained (instructions and data held in main memory), the program being opened is linked to it, and the speed difference is developed with the reason that the CPU would wait for instructions, all applied to the school's computers. Level 3.

Some marks2/6

RAM is the main memory of the computer. It stores the programs and data that are being used at the moment. When you open a program it is copied into RAM, and the CPU fetches instructions from RAM. RAM is faster than the hard drive, so a program runs better from RAM. Having 16 GB means the school can have more programs open at once.

Why: Basic, independent points only: what RAM is, that a program is copied into RAM when it is opened, that the CPU fetches instructions from RAM, and that RAM is faster than a hard drive. None is linked to the stored program concept or developed to explain why the CPU would have to wait for instructions, so Level 1, 2 marks.

No marks0/6

RAM is the permanent storage inside the computer, like a hard drive. The school needs 16 GB of RAM so that all the students' files can be saved permanently. When a program is opened, it is copied from RAM to the CPU. The CPU cannot execute from secondary storage because secondary storage is read-only.

Why: No creditworthy points. RAM is described as permanent storage, files are said to be saved permanently in RAM, a program is said to be copied from RAM to the CPU, and secondary storage is said to be read-only. All are the misconceptions listed in the Do not accept guidance, so Level 0.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.