Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 514 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

6 questions · 9 marks

Pick again
Print
1Multiple choice1 markCompression Swap Remove

Identify one reason for using data compression.

[1 mark]
  • ATo increase the number of packets sent
  • BTo reduce the time taken to transmit a file
  • CTo improve the quality of the file
  • DTo make the file harder to open
Mark scheme
  • B To reduce the time taken to transmit a file (1)
  • The only correct answer is B. The correct answer is to reduce the time taken to transmit a file.
  • A is not correct because compression reduces file size, which can reduce the number of packets sent
  • C is not correct because lossy compression can reduce the quality of a file
  • D is not correct because encryption, not compression, can make a file harder to open
Example answers and how they were marked
Full marks1/1

B To reduce the time taken to transmit a file

Why: Correct option (1).

No marks0/1

A To increase the number of packets sent

Why: Near miss: compression reduces the number of packets sent, so no mark.

No marks0/1

C To improve the quality of the file

Why: Misconception that compression improves quality; no mark.

2Multiple choice1 markAddressing Swap Remove

A packet of data is sent across the internet to a web server. The packet has a header that stores information about the packet.

Identify the information in the packet header that a router uses to forward the packet towards its destination.

[1 mark]
  • AThe destination domain name
  • BThe destination IP address
  • CThe MAC address of the sender
  • DThe name of the file being sent
Mark scheme
  • B The destination IP address (1)
  • The only correct answer is B. The correct answer is the destination IP address.
  • A is not correct because a domain name is converted to an IP address by a DNS server before routing begins
  • C is not correct because the sender's MAC address is only used to deliver the packet on the local network
  • D is not correct because the file name is not used to route packets
Example answers and how they were marked
Full marks1/1

B The destination IP address

Why: Correct option (1): a router reads the destination IP address in the header to forward the packet towards its destination.

No marks0/1

A The destination domain name

Why: A domain name is converted to an IP address by a DNS server before routing begins, so it is not the routing information in the header (mark scheme line A); no mark.

No marks0/1

C The MAC address of the sender

Why: The sender's MAC address is only used to deliver the packet on the local network, so it is not used by the router to forward the packet (mark scheme line C); no mark.

3Convert1 markBinary to Denary Conversion Swap Remove

Computers manipulate binary patterns.

Convert the binary pattern 1010 0100 to denary.

[1 mark]
Mark scheme

Award one mark for:

  • 164 (1)
Example answers and how they were marked
Full marks1/1

164

Why: Correct: 128 + 32 + 4 = 164 (1).

No marks0/1

37

Why: Reads the place values from the wrong end (the left-hand bit as 1), so the value is wrong.

No marks0/1

3

Why: Counts the 1s instead of adding their place values.

4Describe2 marksUser Management Swap Remove

A computer can be used by more than one person.

Describe how an operating system uses access rights to protect each user's files.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Each user/file is given permissions/access rights (1) so other users cannot read/write/open/change that user's files (1)
  • A user may be given read-only/read access to a file (1) so they cannot edit/delete/change it (1)
  • Each file is given permissions/access rights for different users (1) so the operating system allows/refuses access depending on which user is logged in (1)
  • The operating system checks a user's permissions/access rights when a file is opened (1) so a user with read-only/read access cannot save/delete changes (1)

Do not accept responses about asking for a password/username, as this checks who the user is, not what they are allowed to do.

Do not accept 'files are protected/safe' or 'access rights protect files' without saying how access is limited (e.g. read-only access, permissions for different users).

Example answers and how they were marked
Full marks2/2

A user can be given read-only access to a file, so they can open it but cannot edit or delete it.

Why: Read-only/read access point (1) and linked development that the user cannot edit/delete the file (1).

Some marks1/2

A user can be given read-only access to a file.

Why: Read-only/read access point (1); no development saying what this prevents, such as being unable to edit/delete the file (0).

No marks0/2

The operating system asks for the password again before the file opens.

Why: Describes asking for a password, which checks who the user is, not access rights to the file; no creditworthy point.

5Describe2 marksLow and High Level Languages Swap Remove

A device driver is software that allows the operating system to control a piece of hardware. Device drivers are often written in a low-level programming language.

Describe one reason why a low-level programming language is suitable for writing a device driver.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Instructions can manipulate/control the hardware/memory/registers directly (1) so the driver can control the specific device it is written for (1)
  • The code is written for one specific processor/architecture (1) so it works with the exact hardware it will control (1)
  • The programmer controls exactly how memory/registers are used (1) so the code is efficient and needs little memory, which suits a device that has limited memory (1)
  • Each instruction maps to one machine code instruction (1) so the driver code is small enough to fit in the memory of the device (1)

Extra detail, such as naming the device the driver controls, is not needed to earn the marks.

Do not accept 'it is closer to machine code' on its own: it must be developed to show how this helps the driver, e.g. it can control the hardware directly.

Do not accept 'it is faster/quicker' with no link to the hardware/device, e.g. the device responds quickly.

Do not accept 'it is easier to learn', 'it is easier to debug' or 'it takes less time to write'.

Example answers and how they were marked
Full marks2/2

Low-level instructions can manipulate the hardware and memory directly (1) so the driver can control the specific device it was written for, such as a sound card (1).

Why: Point about direct control of hardware/memory (1) linked to controlling the specific device (1). The named device is extra detail and is not needed.

Some marks1/2

Low-level instructions can manipulate the hardware directly.

Why: Correct point (1) but no linked development saying how this helps the device driver.

No marks0/2

It is closer to machine code so it runs faster than a high-level language.

Why: 'Closer to machine code' is not developed into how this helps the driver, and 'runs faster' is not linked to the hardware/device, so no mark.

6Convert2 marksDenary to Binary Conversion Swap Remove

Binary patterns can represent numbers.

Convert the denary number 199 to 8-bit binary.

[2 marks]
Mark scheme

Award one mark for each correct nibble in the correct order:

  • 1100 (1)
  • 0111 (1)

0 marks if the response is not 8-bit binary.

Example answers and how they were marked
Full marks2/2

1100 0111

Why: 199 = 128 + 64 + 4 + 2 + 1: both nibbles are correct (2).

Some marks1/2

1100 1000

Why: Converts 200 instead (a slip in adding up the place values). The first nibble is correct (1); the second is not.

No marks0/2

1110 0011

Why: The bits are written in reverse, smallest place value first. Neither nibble is correct.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.