Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 7 marks

Pick again
Print
1Multiple choice1 markEmbedded Systems Swap Remove

Modern cars contain many embedded systems.

Identify what the embedded system that controls the cruise control does.

[1 mark]
  • AIt controls the interior lights
  • BIt displays a map for the driver
  • CIt keeps the car at a constant speed
  • DIt sounds an alarm if the car is broken into
Mark scheme
  • C It keeps the car at a constant speed (1)
  • The only correct answer is C. The correct answer is it keeps the car at a constant speed.
  • A is not correct because controlling the interior lights is done by a different embedded system in the car
  • B is not correct because displaying a map for the driver is done by the satellite navigation system
  • D is not correct because sounding an alarm is done by a different embedded system in the car
Example answers and how they were marked
Full marks1/1

C It keeps the car at a constant speed

Why: Correct option: this is the function of the embedded system that controls the cruise control (1).

No marks0/1

B It displays a map for the driver

Why: Near miss: displaying a map is the function of the satellite navigation system, which the mark scheme says is not correct, so no mark.

No marks0/1

A It controls the interior lights

Why: Misconception: the interior lights are controlled by a different embedded system, so no mark.

2Short recall2 marksPrimary Memory Swap Remove

A computer is designed using the von Neumann stored program concept.

Define the term stored program concept.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • The program instructions and data are stored together in main memory/RAM (1)
  • The same memory is used for both instructions and data (1)
  • The instructions are fetched from main memory and executed by the CPU (1)
  • The instructions are fetched and executed one at a time / in sequence (1)
  • The program can be changed/replaced by loading new instructions into memory, without changing the hardware (1)

Do not accept the program is stored in secondary storage / on the hard disk.

Do not accept the program is stored in the CPU / in registers.

Example answers and how they were marked
Full marks2/2

The program instructions and the data are stored together in main memory, and the CPU fetches the instructions one at a time and executes them.

Why: Creditworthy point that instructions and data are stored in the same main memory (1) and the linked point that the CPU fetches and executes them from memory (1).

Some marks1/2

The program is held in the main memory (RAM) so that the computer can run it.

Why: Earns the point that the program instructions are stored in main memory (1), but does not say that the CPU fetches and executes them, so the second mark is not earned.

No marks0/2

The program is stored on the hard disk and loaded into the CPU when it is run.

Why: Both parts are misconceptions named in the Do not accept lines: the stored program concept keeps the instructions in main memory, not on secondary storage or in the CPU.

3Short recall2 marksStored Program Computers Swap Remove

Computers use the von Neumann stored program concept.

Define the term stored program concept.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Program instructions are stored in main memory/RAM (1)
  • The data used by the program is stored in main memory/RAM (1)
  • The CPU fetches/reads instructions from main memory to execute them (1)
  • The program can be run without the instructions being input again (1)

Allow 'the program is stored in memory' for one mark.

Do not accept answers about programs being stored on secondary storage, such as a hard disk or USB memory stick.

Do not accept answers that only describe the von Neumann architecture (e.g. having a CPU and memory) without stating that instructions are stored in main memory.

Example answers and how they were marked
Full marks2/2

Both the program instructions and the data the program uses are held in the same main memory, and the CPU fetches these instructions from memory to execute them.

Why: Instructions stored in main memory (1) and the CPU fetches instructions from memory to execute them (1).

Some marks1/2

Program instructions are stored in main memory.

Why: Instructions stored in main memory (1). No second point about data being stored in the same memory or about the CPU fetching instructions.

No marks0/2

The program is saved on the hard disk so that it can be loaded into RAM when the user runs it.

Why: A near-miss about secondary storage, which the mark scheme says not to accept; the stored program concept is about instructions being held in main memory.

4Describe2 marksStored Program Computers Swap Remove

The control unit (CU) is a component inside the CPU.

Describe the role of the control unit in the fetch-decode-execute cycle.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Decodes each (fetched) instruction (1) to work out which operation is needed / which components should carry it out (1)
  • Coordinates/directs the other components (1) by sending control signals along the control bus (1)
  • Fetches the next instruction (1) by sending its address to main memory along the address bus (1)
  • Sends a read/write control signal to main memory (1) so that the instruction or data is transferred during the fetch/execute stage (1)

Do not accept answers about synchronising the CPU or timing the cycles (that is the role of the clock).

Do not accept answers about carrying out arithmetic or logical operations (that is the ALU).

Do not accept answers about holding data or the results of instructions (that is registers/main memory).

Do not accept generic answers that only say the CU controls the CPU or processes instructions, with no linked development.

Only award one mark for a response that only repeats that the CU sends control signals; the second mark needs a linked outcome such as coordination, a memory read/write, or fetching an instruction.

Do not accept 'during the decode stage' as the development for the decoding point, as it restates the question.

Example answers and how they were marked
Full marks2/2

It decodes the instruction that has been fetched so that it knows which operation the CPU must carry out and which components should do it.

Why: Decoding named with the acceptable wording 'each (fetched) instruction' (1), plus the linked development that this identifies the operation and components (1).

Some marks1/2

It decodes each instruction during the decode stage of the cycle.

Why: Earns (1) for decoding the instruction. 'During the decode stage' restates the question and is not accepted as a development, so the second mark is not earned.

No marks0/2

It carries out the calculations and comparisons when the instruction is executed.

Why: Calculations and comparisons are the ALU's role, which the 'Do not accept' line rules out, so no mark is earned.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 71
Data Protection Act 17 questions Impact of AI 18 questions Intellectual Property 18 questions Software Licences 18 questions

5.3 Cybersecurity

Build a paper on this topic 36
Malware 18 questions Social Engineering 18 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.