Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 631 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

5 questions · 9 marks

Pick again
Print
1Short recall2 marksSound Swap Remove

A sound wave is sampled and the amplitude of each sample is stored using a small number of bits.

Give two limitations of storing the sound in binary when only a small number of bits is available for each sample.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Only a limited/fixed number of amplitude values can be stored (1)
  • The amplitude of each sample is rounded/approximated to the nearest value that can be stored (1)
  • The recording is less accurate than the original analogue sound/does not match the analogue wave exactly (1)
  • Sounds louder than the highest amplitude that can be stored are clipped/distorted (1)
  • Sounds quieter than the lowest amplitude that can be stored cannot be represented/are lost (1)

Allow quantisation error/noise for the amplitude being rounded to the nearest value that can be stored, but do not award a second mark for the same idea

Allow a stated consequence as a separate mark only when it is a different point from the list, e.g. fewer amplitude values can be stored (1) so very quiet sounds are lost (1)

Do not accept 'lower quality'/'poorer sound' on its own; the answer must say the recording is less accurate than the original/does not match the analogue wave

Do not accept sample rate/sample interval/number of channels (stereo/mono), as these are not limited by the number of bits available for each sample

Do not accept remedies such as 'a larger bit depth would make it more accurate', as these do not describe a limitation

Do not accept answers about file size, compression or playback method

Do not accept a statement that repeats the stem, e.g. 'the sound is stored in binary using a fixed number of bits'

Example answers and how they were marked
Full marks2/2

The amplitude of each sample has to be rounded to the nearest value that can be stored, and very quiet sounds cannot be represented.

Why: Amplitude rounded to the nearest stored value (1) and quiet sounds cannot be represented (1): two different points from the list.

Some marks1/2

The recording is less accurate than the original sound.

Why: The recording is less accurate than the original analogue sound (1); a second, different limitation is not given.

No marks0/2

The sample rate is too low, so parts of the wave are missed.

Why: Sample rate is not limited by the number of bits per sample, so it is not accepted.

2Short recall1 markImages Swap Remove

A bitmap image uses one bit per pixel.

State the limitation this places on the number of colours in the image.

[1 mark]
Mark scheme

Award one mark for any of the following:

  • Only two different colours can be represented/stored (1)
  • Each pixel can only be one of two values (1)
  • The image can only be shown in black and white (1)

Allow answers that give the number of colours, e.g. two colours, 2 colours

Allow any pair of two colours, e.g. black and white, black and grey

Do not accept low resolution/poor quality/lower quality

Do not accept only one colour/can only show black

Do not accept 2 bits/2^1 without a statement about the number of colours that can be represented

Example answers and how they were marked
Full marks1/1

Only two colours can be represented, such as black and white.

Why: States that only two different colours can be represented (1)

No marks0/1

The image will have a low resolution.

Why: Confuses colour depth with resolution; low resolution is not accepted

No marks0/1

The image can only show black.

Why: One colour is all a single value can give; the limitation is that only two colours can be represented, so this is not accepted

3Describe2 marksSound Swap Remove

Each sample of a sound is stored as a binary number.

Describe how bit depth affects the stored value of a sound sample.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • The bit depth is the number of bits used to store each sample/measurement (1) so a higher bit depth gives more possible/discrete values for the amplitude (1)
  • A higher bit depth records the amplitude more accurately (1) because the stored value can be closer to the actual height of the wave (1)
  • A low bit depth gives fewer possible amplitude values (1) so the amplitude is rounded to the nearest value, making the recording less accurate (1)

Do not accept sample rate/sample interval (number of samples per second) in place of bit depth.

Do not accept 'more bits gives better quality' or 'more accurate' on its own, without a development linked to the number of values or the amplitude stored.

Do not accept file size on its own, and a file size point cannot earn the second mark, as it does not describe the stored value.

Example answers and how they were marked
Full marks2/2

The bit depth is the number of bits used to store each sample, so a higher bit depth gives more possible values for the amplitude that can be stored.

Why: First point, the number of bits per sample (1), then the linked development, more possible values for the amplitude (1).

Some marks1/2

The bit depth is the number of bits used to store one sample.

Why: Gives the first point, the number of bits per sample (1), but does not develop how this affects the value that is stored.

No marks0/2

A higher bit depth makes the sound better quality and more accurate.

Why: Near-miss: 'better quality' and 'more accurate' on their own, with no development linked to the number of values or the amplitude, so no mark is awarded.

4Explain2 marksCharacter Sets Swap Remove

A computer system uses a 4-bit code to represent the characters typed on its keyboard.

Explain one limitation of using 4 bits to represent characters.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Only 16 different characters can be represented (1) so there are not enough characters codes for every letter of the alphabet (1)
  • 4 bits give only 16 different combinations (1) which is not enough for the uppercase letters, lowercase letters, digits and symbols on a keyboard (1)
  • More than 16 characters are needed on a keyboard (1) so some letters, digits or symbols cannot be represented (1)
  • The number of character codes available is limited to 16 (1) because 4 bits give 2 to the power of 4 combinations (1)

For both marks, the expansion must follow/associate with the statement.

Calculating that 4 bits give 2 to the power of 4 = 16 combinations can earn either the point or the linked reason, provided the other half of the answer says what this means (too few characters/codes).

Allow an expansion that names only the letters of the alphabet, e.g. there are not enough character codes for the 26 letters (1).

Do not accept '4 bits can only store 4 characters' (the number of bits is not the number of characters).

Do not accept 'it can only store 16 bits' (16 is the number of character codes/combinations, not the number of bits).

Do not accept 'not enough memory/storage' (the limitation is the number of character codes, not the amount of storage).

Do not accept 'it is limited/smaller' without saying how many characters/codes are available or what cannot be represented.

Example answers and how they were marked
Full marks2/2

Only 16 different characters can be represented, so there are not enough character codes for all 26 letters.

Why: Gives the point that only 16 characters can be represented (1) and links it to the reason that this is fewer than the letters needed (1).

Some marks1/2

Only 16 different characters can be represented.

Why: Gives the point that only 16 characters can be represented (1) but does not explain what cannot be represented.

No marks0/2

It can only store 4 characters because there are 4 bits.

Why: Misconception that the number of bits equals the number of characters, which the mark scheme says not to accept; no creditworthy point.

5Explain2 marksImages Swap Remove

Two versions of the same photograph are displayed at the same size on a screen. Version A is 800 × 600 pixels. Version B is 1600 × 1200 pixels.

Explain why Version B can show more detail.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Version B has more pixels in the same area (1) so each pixel represents a smaller part of the image (1)
  • Version B has a higher pixel density (1) so finer detail can be represented (1)
  • The pixels in Version B are smaller (1) so more detail can be captured in the same space (1)
  • Version B has a higher resolution (1) because there are more pixels per unit of area (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'more pixels' on its own without saying same area/pixel density/smaller pixels.

Do not accept higher colour depth or more colours.

Example answers and how they were marked
Full marks2/2

Version B has more pixels in the same area (1) so each pixel represents a smaller part of the image (1).

Why: Linked point (1) and reason (1): more pixels in the same area means smaller pixels and more detail.

Some marks1/2

Version B has more pixels in the same area.

Why: One mark for the point about pixel density; the linked reason about smaller pixels or finer detail is missing.

No marks0/2

Version B has a higher colour depth, so it can display more colours.

Why: Colour depth is not the reason for more detail here; this is the common misconception that colour depth increases resolution.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 45
Data Protection Act 17 questions Impact of AI 16 questions Intellectual Property 12 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.