Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 659 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 12 marks

Pick again
Print
1Short recall2 marksSound Swap Remove

A sound wave is sampled and the amplitude of each sample is stored using a small number of bits.

Give two limitations of storing the sound in binary when only a small number of bits is available for each sample.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Only a limited/fixed number of amplitude values can be stored (1)
  • The amplitude of each sample is rounded/approximated to the nearest value that can be stored (1)
  • The recording is less accurate than the original analogue sound/does not match the analogue wave exactly (1)
  • Sounds louder than the highest amplitude that can be stored are clipped/distorted (1)
  • Sounds quieter than the lowest amplitude that can be stored cannot be represented/are lost (1)

Allow quantisation error/noise for the amplitude being rounded to the nearest value that can be stored, but do not award a second mark for the same idea

Allow a stated consequence as a separate mark only when it is a different point from the list, e.g. fewer amplitude values can be stored (1) so very quiet sounds are lost (1)

Do not accept 'lower quality'/'poorer sound' on its own; the answer must say the recording is less accurate than the original/does not match the analogue wave

Do not accept sample rate/sample interval/number of channels (stereo/mono), as these are not limited by the number of bits available for each sample

Do not accept remedies such as 'a larger bit depth would make it more accurate', as these do not describe a limitation

Do not accept answers about file size, compression or playback method

Do not accept a statement that repeats the stem, e.g. 'the sound is stored in binary using a fixed number of bits'

Example answers and how they were marked
Full marks2/2

The amplitude of each sample has to be rounded to the nearest value that can be stored, and very quiet sounds cannot be represented.

Why: Amplitude rounded to the nearest stored value (1) and quiet sounds cannot be represented (1): two different points from the list.

Some marks1/2

The recording is less accurate than the original sound.

Why: The recording is less accurate than the original analogue sound (1); a second, different limitation is not given.

No marks0/2

The sample rate is too low, so parts of the wave are missed.

Why: Sample rate is not limited by the number of bits per sample, so it is not accepted.

2Explain2 marksCharacter Sets Swap Remove

A computer system uses a 4-bit code to represent the characters typed on its keyboard.

Explain one limitation of using 4 bits to represent characters.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Only 16 different characters can be represented (1) so there are not enough characters codes for every letter of the alphabet (1)
  • 4 bits give only 16 different combinations (1) which is not enough for the uppercase letters, lowercase letters, digits and symbols on a keyboard (1)
  • More than 16 characters are needed on a keyboard (1) so some letters, digits or symbols cannot be represented (1)
  • The number of character codes available is limited to 16 (1) because 4 bits give 2 to the power of 4 combinations (1)

For both marks, the expansion must follow/associate with the statement.

Calculating that 4 bits give 2 to the power of 4 = 16 combinations can earn either the point or the linked reason, provided the other half of the answer says what this means (too few characters/codes).

Allow an expansion that names only the letters of the alphabet, e.g. there are not enough character codes for the 26 letters (1).

Do not accept '4 bits can only store 4 characters' (the number of bits is not the number of characters).

Do not accept 'it can only store 16 bits' (16 is the number of character codes/combinations, not the number of bits).

Do not accept 'not enough memory/storage' (the limitation is the number of character codes, not the amount of storage).

Do not accept 'it is limited/smaller' without saying how many characters/codes are available or what cannot be represented.

Example answers and how they were marked
Full marks2/2

Only 16 different characters can be represented, so there are not enough character codes for all 26 letters.

Why: Gives the point that only 16 characters can be represented (1) and links it to the reason that this is fewer than the letters needed (1).

Some marks1/2

Only 16 different characters can be represented.

Why: Gives the point that only 16 characters can be represented (1) but does not explain what cannot be represented.

No marks0/2

It can only store 4 characters because there are 4 bits.

Why: Misconception that the number of bits equals the number of characters, which the mark scheme says not to accept; no creditworthy point.

3Explain2 marksImages Swap Remove

An image uses a colour depth of 2 bits per pixel. The original image contains 12 different colours.

Explain why the image cannot be represented accurately at this colour depth.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Only 4 colours can be represented (1) because 2 bits give 2^2 = 4 possible values (1)
  • Some of the 12 colours cannot be stored (1) so they are lost/replaced with a colour that can be represented (1)
  • The image will not match the original exactly (1) because there are fewer colour codes than the number of colours needed (1)
  • Many colours will share the same binary value (1) so the image will lose colour detail (1)

For both marks, the expansion must follow/associate with the statement.

Allow 'four colours' or '2^2'.

Do not accept 'only two colours' (confusing the number of bits with the number of values) or 'resolution is too low'.

Example answers and how they were marked
Full marks2/2

Only four colours can be represented because two bits give four possible binary values.

Why: Linked point (1) and reason (1): 2 bits give 2^2 = 4 colour codes.

Some marks1/2

Only four colours can be represented.

Why: One mark for identifying that four colours can be represented; the linked reason about two bits giving four values is missing.

No marks0/2

Only two colours can be represented because each pixel has two bits.

Why: A common misconception: two bits give four possible values, not two, so no creditworthy point is given.

4Discuss6 marksImages Swap Remove

A handheld games console displays sprites. The console stores each pixel of a sprite using 4 bits. Designers want sprites that contain many shades of green and blue.

Discuss the limitations of using 4 bits to store each pixel of a sprite on the console.

Your answer should include:

  • the number of colours that can be represented
  • the effect on the appearance of the sprite
  • how the limitation could be managed.
[6 marks]
Mark scheme

Indicative content

Number of colours

  • 4 bits give 2^4 = 16 different binary values, so at most 16 colours can be stored for each pixel.
  • The console cannot store every shade that the designers want; colours outside the 16 must be approximated or left out.
  • Adding more bits per pixel would allow more colours, but this may not be possible on the console's hardware.

Effect on appearance

  • The sprite may show banding where a smooth change from green to blue should be.
  • A sprite that needs many shades, such as a detailed landscape, will look unrealistic or have blocks of colour.
  • Simple sprites with flat colours, such as a retro character, can still look acceptable.
  • The limitation is in the number of colours, not the number of pixels; resolution is a separate issue.

Managing the limitation

  • Designers can choose a palette of 16 colours that includes the most important greens and blues for the game.
  • They can design sprites with flat colours rather than smooth gradients.
  • They can use more bits per pixel for important sprites if the console allows it.
  • They can accept that some shades will be approximated and check that the sprite still looks clear on the console's screen.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Level 3 responses must cover the number of colours and the effect on appearance.

Do not accept 4 bits give 4 colours or 8 colours.

Example answers and how they were marked
Full marks6/6

4 bits per pixel gives 2^4 = 16 different binary values, so each pixel can be only one of 16 colours. The designers want many shades of green and blue, but most of these cannot be stored exactly and must be approximated or left out. This can cause banding where a smooth change from green to blue should be, so a detailed sprite may look unrealistic. A simple sprite with flat colours could still look acceptable. The designers could choose a palette of 16 colours that includes the most important greens and blues, and design sprites with flat colours instead of gradients. Using more bits per pixel would allow more colours, but the console's hardware may not support this.

Why: Explains 2^4 = 16 colours and the limitation on shades, links this to banding and realism, and gives suitable ways to manage it in the console context. Sustained reasoning, so Level 3.

Some marks4/6

4 bits can store 16 colours. This means the sprite cannot have many colours. It might look bad if it needs lots of shades of green and blue. The designers could use fewer colours in the sprite.

Why: Correctly gives 16 colours and makes a simple link to the sprite's appearance and a way to manage it. There is little development of the effect or the management, so Level 2.

Some marks1/6

4 bits can store 16 colours. This means the sprite will have a low resolution, so it will look blocky. The designers should use a higher resolution to get more shades of green and blue.

Why: One correct point: 4 bits give 16 colours. The answer then confuses colour depth with resolution; increasing resolution would not provide more shades.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 65
Data Protection Act 17 questions Impact of AI 18 questions Intellectual Property 18 questions Software Licences 12 questions

5.3 Cybersecurity

Malware 8 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.