Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 631 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 8 marks

Pick again
Print
1Short recall2 marksSound Swap Remove

A sound wave is sampled and the amplitude of each sample is stored using a small number of bits.

Give two limitations of storing the sound in binary when only a small number of bits is available for each sample.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Only a limited/fixed number of amplitude values can be stored (1)
  • The amplitude of each sample is rounded/approximated to the nearest value that can be stored (1)
  • The recording is less accurate than the original analogue sound/does not match the analogue wave exactly (1)
  • Sounds louder than the highest amplitude that can be stored are clipped/distorted (1)
  • Sounds quieter than the lowest amplitude that can be stored cannot be represented/are lost (1)

Allow quantisation error/noise for the amplitude being rounded to the nearest value that can be stored, but do not award a second mark for the same idea

Allow a stated consequence as a separate mark only when it is a different point from the list, e.g. fewer amplitude values can be stored (1) so very quiet sounds are lost (1)

Do not accept 'lower quality'/'poorer sound' on its own; the answer must say the recording is less accurate than the original/does not match the analogue wave

Do not accept sample rate/sample interval/number of channels (stereo/mono), as these are not limited by the number of bits available for each sample

Do not accept remedies such as 'a larger bit depth would make it more accurate', as these do not describe a limitation

Do not accept answers about file size, compression or playback method

Do not accept a statement that repeats the stem, e.g. 'the sound is stored in binary using a fixed number of bits'

Example answers and how they were marked
Full marks2/2

The amplitude of each sample has to be rounded to the nearest value that can be stored, and very quiet sounds cannot be represented.

Why: Amplitude rounded to the nearest stored value (1) and quiet sounds cannot be represented (1): two different points from the list.

Some marks1/2

The recording is less accurate than the original sound.

Why: The recording is less accurate than the original analogue sound (1); a second, different limitation is not given.

No marks0/2

The sample rate is too low, so parts of the wave are missed.

Why: Sample rate is not limited by the number of bits per sample, so it is not accepted.

2Describe2 marksSound Swap Remove

Sound is converted into binary using a limited bit depth.

Describe one limitation of representing a sound sample with a limited bit depth.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Only a fixed number of amplitude values/levels can be represented (1) so the amplitude is rounded to the nearest available value/level (1)
  • Fewer amplitude values/levels are available to choose from (1) so similar/close amplitudes cannot be stored as different values (1)
  • The exact amplitude often falls between available values/levels (1) so the stored amplitude is not exact/less accurate (1)

Answers must relate to the number of bits per sample (bit depth) and the amplitude values/levels it can represent.

Do not accept answers about the sample rate, sample interval or the number of samples taken, or that confuse bit depth with the number of samples.

Do not award 'lower quality'/'more detail'/'less detail' unless it is linked to the number of amplitude values/levels.

Do not accept 'the sound cannot be played/stored' without a linked limitation.

Example answers and how they were marked
Full marks2/2

Only a fixed number of amplitude values can be represented, so the amplitude is rounded to the nearest available value and some detail is lost.

Why: Linked points: fixed number of amplitude values (1) and rounding to the nearest available value (1).

Some marks1/2

Only a fixed number of amplitude values can be represented.

Why: Gives the first linked point only (1); it does not develop what this limitation leads to.

No marks0/2

A lower bit depth means fewer samples are taken, so parts of the sound are missed.

Why: Confuses bit depth with the number of samples/sample rate; no creditworthy point about amplitude values is given.

3Explain2 marksImages Swap Remove

Two versions of the same photograph are displayed at the same size on a screen. Version A is 800 × 600 pixels. Version B is 1600 × 1200 pixels.

Explain why Version B can show more detail.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Version B has more pixels in the same area (1) so each pixel represents a smaller part of the image (1)
  • Version B has a higher pixel density (1) so finer detail can be represented (1)
  • The pixels in Version B are smaller (1) so more detail can be captured in the same space (1)
  • Version B has a higher resolution (1) because there are more pixels per unit of area (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'more pixels' on its own without saying same area/pixel density/smaller pixels.

Do not accept higher colour depth or more colours.

Example answers and how they were marked
Full marks2/2

Version B has more pixels in the same area (1) so each pixel represents a smaller part of the image (1).

Why: Linked point (1) and reason (1): more pixels in the same area means smaller pixels and more detail.

Some marks1/2

Version B has more pixels in the same area.

Why: One mark for the point about pixel density; the linked reason about smaller pixels or finer detail is missing.

No marks0/2

Version B has a higher colour depth, so it can display more colours.

Why: Colour depth is not the reason for more detail here; this is the common misconception that colour depth increases resolution.

4Explain2 marksSound Swap Remove

The same sound is recorded twice using different sample intervals.

Explain the effect of using a longer sample interval on the digital recording.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Fewer samples are taken every second (1) so less detail of the sound wave is captured (1)
  • Fewer samples are taken every second (1) so the file is smaller/uses less storage space (1)
  • The wave is measured less often (1) so parts/changes in the wave between samples are missed (1)

For both marks, the expansion must follow/associate with the statement.

The 'fewer samples are taken/measured less often' point can only be credited once; the second mark is for a valid expansion linked to it.

Do not accept restating the question, e.g. 'the time between measurements is longer' or 'the sample interval is longer', as either the point or the expansion.

Do not accept 'the sample rate is lower' as the expansion, as this says the same thing as a longer sample interval.

Do not accept 'the sound is lower quality/less accurate' on its own without saying what is lost, e.g. less detail of the wave captured/parts of the wave missed.

Do not accept answers about using fewer bits per sample or about compression, as these do not follow from the sample interval.

Example answers and how they were marked
Full marks2/2

Fewer samples are taken every second, so less detail of the sound wave is captured and the recording is less accurate.

Why: Point (fewer samples each second) (1) with linked reason (less detail of the wave captured) (1).

Some marks1/2

Fewer samples are taken every second.

Why: Creditworthy point (1) but no linked effect on the detail or size of the recording, so only one mark.

No marks0/2

The samples are stored using fewer bits, so the sound is less accurate.

Why: Describes a smaller bit depth rather than a longer sample interval, so no mark is awarded.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 45
Data Protection Act 17 questions Impact of AI 16 questions Intellectual Property 12 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.