Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 11 marks

Pick again
Print
1Short recall1 markSound Swap Remove

A digital sound representation is created by sampling an analogue sound wave.

State one way the accuracy of this representation can be increased.

[1 mark]
Mark scheme

Award one mark for any of the following:

  • Increase the sample rate / take more samples per second (1)
  • Increase the bit depth/sample resolution / use more bits per sample (1)
  • Decrease the sample interval (1)

Do not accept increase the amplitude/volume

Do not accept decrease the sample rate / increase the sample interval

Example answers and how they were marked
Full marks1/1

Increase the sample rate.

Why: Creditworthy point: increase the sample rate (1).

No marks0/1

Decrease the sample rate.

Why: Near-miss: decreasing the sample rate reduces accuracy, so no mark; the mark scheme's do-not-accept line covers this (0).

No marks0/1

Increase the volume of the sound.

Why: Misconception: loudness/amplitude is not a way to increase sampling accuracy; do not accept increase amplitude/volume (0).

2Short recall2 marksCharacter Sets Swap Remove

ASCII is a character set that uses 7 bits to represent each character.

Give two limitations of 7-bit ASCII when it is used to represent text.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • (Only) 128 different characters can be represented / 7 bits give 2^7 = 128 different codes (1)
  • It cannot represent characters from languages other than English / non-English alphabets, e.g. Greek, Chinese (1)
  • It cannot represent accented characters, e.g. é, ñ (1)
  • It cannot represent symbols or emoji that are not in the ASCII character set (1)

Award a maximum of one mark for the last three bullets, as they are all examples of characters that fall outside the 128 ASCII codes.

Allow 'it can only represent 128 characters, so some characters are missing' for the first bullet.

Do not accept 'it uses 7 bits' / 'it only uses 7 bits' on its own, without saying what this limits.

Do not accept 'it can only store a limited amount of text' / 'it can only store short messages', as 7 bits limits the number of characters available, not the length of a message.

Do not accept 'it can only represent the characters in the ASCII character set', as this repeats the question.

Do not accept 'it is old/out of date' or 'it cannot store numbers'.

Example answers and how they were marked
Full marks2/2

Only 128 different characters can be represented, so it cannot store characters from other languages such as Greek.

Why: 128 character limit (1) and characters from other languages (1); two separate creditworthy limitations.

Some marks1/2

It cannot show accented characters like é and it only uses 7 bits.

Why: Accented characters (1); 'only uses 7 bits' is not qualified, so scores 0.

No marks0/2

It only uses 7 bits, so it can only store a small amount of text.

Why: Scores 0: text length is not a limitation of 7-bit ASCII, and 'only uses 7 bits' is unqualified; both Do not accept lines apply.

3Explain2 marksCharacter Sets Swap Remove

A computer system uses a 4-bit code to represent the characters typed on its keyboard.

Explain one limitation of using 4 bits to represent characters.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Only 16 different characters can be represented (1) so there are not enough characters codes for every letter of the alphabet (1)
  • 4 bits give only 16 different combinations (1) which is not enough for the uppercase letters, lowercase letters, digits and symbols on a keyboard (1)
  • More than 16 characters are needed on a keyboard (1) so some letters, digits or symbols cannot be represented (1)
  • The number of character codes available is limited to 16 (1) because 4 bits give 2 to the power of 4 combinations (1)

For both marks, the expansion must follow/associate with the statement.

Calculating that 4 bits give 2 to the power of 4 = 16 combinations can earn either the point or the linked reason, provided the other half of the answer says what this means (too few characters/codes).

Allow an expansion that names only the letters of the alphabet, e.g. there are not enough character codes for the 26 letters (1).

Do not accept '4 bits can only store 4 characters' (the number of bits is not the number of characters).

Do not accept 'it can only store 16 bits' (16 is the number of character codes/combinations, not the number of bits).

Do not accept 'not enough memory/storage' (the limitation is the number of character codes, not the amount of storage).

Do not accept 'it is limited/smaller' without saying how many characters/codes are available or what cannot be represented.

Example answers and how they were marked
Full marks2/2

Only 16 different characters can be represented, so there are not enough character codes for all 26 letters.

Why: Gives the point that only 16 characters can be represented (1) and links it to the reason that this is fewer than the letters needed (1).

Some marks1/2

Only 16 different characters can be represented.

Why: Gives the point that only 16 characters can be represented (1) but does not explain what cannot be represented.

No marks0/2

It can only store 4 characters because there are 4 bits.

Why: Misconception that the number of bits equals the number of characters, which the mark scheme says not to accept; no creditworthy point.

4Discuss6 marksCharacter Sets Swap Remove

A travel company has a website where customers enter their names and addresses. Some customers have names that include accented letters, such as é, and characters from other alphabets.

Discuss the limitations of using 7-bit ASCII for the text on the travel company's website.

Your answer should consider:

  • the number of characters that 7-bit ASCII can represent
  • characters that cannot be represented
  • the effect of using more bits for each character.
[6 marks]
Mark scheme

Indicative content

The number of characters that 7-bit ASCII can represent

  • Seven-bit ASCII gives 2 to the power of 7, which is 128 different codes, so it can represent a maximum of 128 different characters.
  • This is enough for the English alphabet, digits and common punctuation, but it is a fixed and limited set.
  • The website may need more than 128 characters once customer names from different countries are included.

Characters that cannot be represented

  • Accented letters such as é do not have a 7-bit ASCII code, so they cannot be stored correctly.
  • Characters from any alphabet other than the Latin one, such as Greek or Cyrillic letters, cannot be represented in 7-bit ASCII.
  • If a customer enters a character that is not in the character set, the website may store the wrong character or show a replacement symbol.
  • The company may have to misspell or simplify a customer's name because the required character cannot be stored.

The effect of using more bits for each character

  • Each extra bit doubles the number of available codes, so for n bits there are 2 to the power of n codes; 8 bits give 256 codes and 16 bits give 65 536 codes.
  • Using more bits allows a larger character set to represent accented letters and other alphabets.
  • More bits per character means each character takes more storage, so the website's text files and pages are larger.
  • Larger pages take longer to transmit over the internet to a customer.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Level 3 responses must cover both the limit of 128 codes and at least one type of character that cannot be represented; a point about using more bits on its own is not sufficient for Level 3, and not every bullet needs to be covered for Level 3.

Do not accept the idea that 7-bit ASCII can represent all characters, that extended or 8-bit ASCII can represent every character in every alphabet, or that accented letters are stored as plain letters without the accent.

Example answers and how they were marked
Full marks6/6

7-bit ASCII has only 128 different codes, so it can represent a maximum of 128 characters. That is enough for the English alphabet, digits and common punctuation, but the travel company's website may need more than 128 characters once it includes customers from different countries. Accented letters such as é do not have a 7-bit ASCII code, so they cannot be stored correctly, and characters from other alphabets, such as Greek or Cyrillic letters, cannot be represented at all. If a customer enters one of these characters, the website may store the wrong character or show a replacement symbol, or the company may have to misspell the customer's name. Using more bits would help because each extra bit doubles the number of available codes, so 8 bits give 256 codes and 16 bits give 65 536 codes. A larger character set could then represent accented letters and other alphabets, but each character would take more storage and the website pages would take longer to transmit.

Why: Covers all three bullets with developed reasoning: the 128-code limit, specific characters that cannot be represented, and the effect of using more bits, all applied to the travel website. Level 3.

Some marks4/6

7-bit ASCII only has 128 codes, so it cannot store accented letters like é. If a customer types é, the website might show the wrong character. Using more bits would give more codes, so the website could store more characters.

Why: Covers the 128-code limit and an unrepresentable character with some application, and briefly mentions more bits, but the effect of more bits on storage and transmission is not developed. Level 2.

Some marks1/6

7-bit ASCII has 128 codes, so it can store all the letters and symbols that customers need. Accented letters are stored as normal letters without the accent.

Why: The correct number of codes (128) is a basic point, but the claim that ASCII can store all characters and that accented letters are stored without the accent is rejected by the do-not-accept line. Level 1.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.