Edexcel GCSE Computer Science (1CP2) exam questions

Build a practice paper from 514 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Practice paper

6 questions · 11 marks

Pick again

1Short recall1 markSound Swap Remove

To store sound in binary, an analogue sound wave is sampled at regular intervals.

Define the term 'sample rate'.

[1 mark]

Mark scheme

Award one mark for:

The number of samples taken per second (1)

Allow captured/recorded for taken.

Allow 'samples per second'.

Allow 'each second' for 'per second'.

Allow Hz/hertz as the unit.

Do not accept the time between samples/sample interval.

Do not accept 'the number of samples' without a per second/time reference.

Do not accept the number of bits used per sample/bit depth.

Example answers and how they were marked

Full marks1/1

The number of samples taken per second.

Why: States samples per second (1); 'per second' is accepted.

No marks0/1

The time between each sample.

Why: Defines sample interval, not sample rate; do not accept.

No marks0/1

The number of bits used for each sample.

Why: Describes bit depth, not sample rate; do not accept.

2Short recall2 marksImages Swap Remove

Bitmap images are stored as a grid of pixels.

Define the term pixel.

[2 marks]

Mark scheme

Award one mark for any of the following up to a maximum of two marks:

The smallest element/area of a bitmap image (1)
The smallest identifiable part of an image (1)
Stores/represents a single colour as a binary value (1)
Stores/represents a single colour using a number of bits/colour depth (1)

Allow 'picture element' for element/part in the first two bullets, but not on its own

Allow 'bit depth' for colour depth

Do not accept 'picture element'/'pixel' on its own

Do not accept 'a group of pixels' or 'a dot' on its own; allow 'dot' only when it is described as the smallest element/area of the image

Do not accept 'single colour' on its own for the second mark; it must be linked to a binary value/number of bits

Do not accept 'lots of coloured dots' (it contradicts a single colour)

Example answers and how they were marked

Full marks2/2

The smallest identifiable area of a bitmap image, which has one colour stored as a binary value.

Why: Smallest identifiable area (1) and single colour stored as a binary value (1)

Some marks1/2

The smallest part of a bitmap image, made of one colour.

Why: Smallest part (1); no credit for the second mark because the single colour is not linked to a binary value or number of bits

No marks0/2

A picture element made from lots of coloured dots.

Why: 'Picture element' on its own is not accepted and 'lots of coloured dots' contradicts a single colour

3Describe2 marksSound Swap Remove

Each sample of a sound is stored as a binary number.

Describe how bit depth affects the stored value of a sound sample.

[2 marks]

Mark scheme

Award up to two marks for a linked description such as:

The bit depth is the number of bits used to store each sample/measurement (1) so a higher bit depth gives more possible/discrete values for the amplitude (1)
A higher bit depth records the amplitude more accurately (1) because the stored value can be closer to the actual height of the wave (1)
A low bit depth gives fewer possible amplitude values (1) so the amplitude is rounded to the nearest value, making the recording less accurate (1)

Do not accept sample rate/sample interval (number of samples per second) in place of bit depth.

Do not accept 'more bits gives better quality' or 'more accurate' on its own, without a development linked to the number of values or the amplitude stored.

Do not accept file size on its own, and a file size point cannot earn the second mark, as it does not describe the stored value.

Example answers and how they were marked

Full marks2/2

The bit depth is the number of bits used to store each sample, so a higher bit depth gives more possible values for the amplitude that can be stored.

Why: First point, the number of bits per sample (1), then the linked development, more possible values for the amplitude (1).

Some marks1/2

The bit depth is the number of bits used to store one sample.

Why: Gives the first point, the number of bits per sample (1), but does not develop how this affects the value that is stored.

No marks0/2

A higher bit depth makes the sound better quality and more accurate.

Why: Near-miss: 'better quality' and 'more accurate' on their own, with no development linked to the number of values or the amplitude, so no mark is awarded.

4Explain2 marksCharacter Sets Swap Remove

A computer system uses a 4-bit code to represent the characters typed on its keyboard.

Explain one limitation of using 4 bits to represent characters.

[2 marks]

Mark scheme

Award up to two marks for a linked explanation such as:

Only 16 different characters can be represented (1) so there are not enough characters codes for every letter of the alphabet (1)
4 bits give only 16 different combinations (1) which is not enough for the uppercase letters, lowercase letters, digits and symbols on a keyboard (1)
More than 16 characters are needed on a keyboard (1) so some letters, digits or symbols cannot be represented (1)
The number of character codes available is limited to 16 (1) because 4 bits give 2 to the power of 4 combinations (1)

For both marks, the expansion must follow/associate with the statement.

Calculating that 4 bits give 2 to the power of 4 = 16 combinations can earn either the point or the linked reason, provided the other half of the answer says what this means (too few characters/codes).

Allow an expansion that names only the letters of the alphabet, e.g. there are not enough character codes for the 26 letters (1).

Do not accept '4 bits can only store 4 characters' (the number of bits is not the number of characters).

Do not accept 'it can only store 16 bits' (16 is the number of character codes/combinations, not the number of bits).

Do not accept 'not enough memory/storage' (the limitation is the number of character codes, not the amount of storage).

Do not accept 'it is limited/smaller' without saying how many characters/codes are available or what cannot be represented.

Example answers and how they were marked

Full marks2/2

Only 16 different characters can be represented, so there are not enough character codes for all 26 letters.

Why: Gives the point that only 16 characters can be represented (1) and links it to the reason that this is fewer than the letters needed (1).

Some marks1/2

Only 16 different characters can be represented.

Why: Gives the point that only 16 characters can be represented (1) but does not explain what cannot be represented.

No marks0/2

It can only store 4 characters because there are 4 bits.

Why: Misconception that the number of bits equals the number of characters, which the mark scheme says not to accept; no creditworthy point.

5Explain2 marksImages Swap Remove

Two versions of the same photograph are displayed at the same size on a screen. Version A is 800 × 600 pixels. Version B is 1600 × 1200 pixels.

Explain why Version B can show more detail.

[2 marks]

Mark scheme

Award up to two marks for a linked explanation such as:

Version B has more pixels in the same area (1) so each pixel represents a smaller part of the image (1)
Version B has a higher pixel density (1) so finer detail can be represented (1)
The pixels in Version B are smaller (1) so more detail can be captured in the same space (1)
Version B has a higher resolution (1) because there are more pixels per unit of area (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'more pixels' on its own without saying same area/pixel density/smaller pixels.

Do not accept higher colour depth or more colours.

Example answers and how they were marked

Full marks2/2

Version B has more pixels in the same area (1) so each pixel represents a smaller part of the image (1).

Why: Linked point (1) and reason (1): more pixels in the same area means smaller pixels and more detail.

Some marks1/2

Version B has more pixels in the same area.

Why: One mark for the point about pixel density; the linked reason about smaller pixels or finer detail is missing.

No marks0/2

Version B has a higher colour depth, so it can display more colours.

Why: Colour depth is not the reason for more detail here; this is the common misconception that colour depth increases resolution.

6Explain2 marksSound Swap Remove

Each sample of a sound wave is stored as a binary number.

Explain how increasing the bit depth affects the representation of a sound wave.

[2 marks]

Mark scheme

Award up to two marks for a linked explanation such as:

Each sample is stored using more bits (1) so the amplitude can be recorded more precisely (1)
More different amplitude values can be represented (1) because each extra bit doubles the number of possible values (1)
The height of the wave at each sample point is measured more accurately (1) so the digital wave is closer to the analogue wave (1)
The gap between the true amplitude and the stored value is smaller (1) because there are more values for the sample to be rounded to (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'the sound is sampled more often' or 'more samples are taken per second', as these describe the sample rate, not the bit depth.

Do not accept 'the file size increases' on its own as an effect on the representation of the sound.

Example answers and how they were marked

Full marks2/2

Each sample is stored using more bits, so the amplitude at each sample point can be recorded more precisely.

Why: Point (more bits per sample) (1) with linked reason (amplitude recorded more precisely) (1).

Some marks1/2

Each sample is stored using more bits.

Why: Creditworthy point (1) but no linked effect on the accuracy of the representation, so only one mark.

No marks0/2

It takes more samples every second, so the wave is stored in more detail.

Why: Confuses bit depth with sample rate, so no mark is awarded.

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a paper

Practice paper

Questions by topic

2.1 Binary

2.2 Data representation

2.3 Data storage and compression

3.1 Hardware

3.2 Software

3.3 Programming languages

4.1 Networks

More ways to revise Edexcel GCSE Computer Science (1CP2)