Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 573 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

5 questions · 7 marks

Pick again
Print
1Multiple choice1 markEmbedded Systems Swap Remove

Identify the device that is a general purpose computer.

[1 mark]
  • ADesktop computer
  • BMicrowave oven
  • CWashing machine
  • DTraffic light
Mark scheme
  • A Desktop computer (1)
  • The only correct answer is A. The correct answer is Desktop computer.
  • B is not correct because a microwave oven uses an embedded system, built into it, to control a dedicated function
  • C is not correct because a washing machine uses an embedded system, built into it, to control a dedicated function
  • D is not correct because a traffic light uses an embedded system, built into it, to control a dedicated function
Example answers and how they were marked
Full marks1/1

A Desktop computer

Why: Correct option: the question asks for the general purpose computer, and a desktop computer is general purpose; it does not use an embedded system to control a dedicated function (1).

No marks0/1

B Microwave oven

Why: Near miss: a microwave oven is the kind of device that uses an embedded system, built into it, to control a dedicated function, so it is not a general purpose computer; mark scheme says B is not correct.

No marks0/1

C Washing machine

Why: Misconception: because a washing machine contains a computer, it must be a general purpose computer; it actually uses an embedded system built into it for a dedicated function, so no mark.

2Multiple choice1 markCharacter Sets Swap Remove

A new character set must be able to represent 70 different characters.

Identify the minimum number of bits needed to represent each character.

[1 mark]
  • A6
  • B7
  • C8
  • D70
Mark scheme
  • B 7 (1)
  • The only correct answer is B. The correct answer is 7.
  • A is not correct because 6 bits give only 64 combinations, which is not enough for 70 characters
  • C is not correct because 7 bits already give 128 combinations, so 8 bits is not the minimum needed
  • D is not correct because 70 is the number of characters needed, not a number of bits
Example answers and how they were marked
Full marks1/1

B 7

Why: The only correct answer: 7 bits give 128 combinations, enough for 70 characters, and it is the smallest number of bits that does (1).

No marks0/1

C 8

Why: Distractor, no credit: a single-tick item has no partial credit, and 8 bits is not the minimum because 7 bits already give 128 combinations, so the scheme's C line gives no mark.

No marks0/1

A 6

Why: Misconception, no credit: 6 bits give only 64 combinations, which cannot represent 70 different characters, so the scheme's A line gives no mark.

3Short recall1 markSecondary Memory Swap Remove

Data is stored on optical discs as pits and lands.

Name the component in an optical disc drive that reads this data.

[1 mark]
Mark scheme

Award one mark for:

  • Laser (1)

Allow laser beam

Do not accept read/write head

Do not accept pits

Do not accept lands

Do not accept reflective surface

Do not accept magnet/magnetic

Example answers and how they were marked
Full marks1/1

Laser

Why: Laser is the creditworthy answer (1).

No marks0/1

A read/write head

Why: Read/write head is not accepted by the mark scheme; it reads magnetic media, not optical discs, so no marks are awarded.

No marks0/1

Pits and lands

Why: Pits and lands are what the laser reads, not the component that reads the data, so the mark scheme does not accept them.

4Short recall2 marksUnits & Conversion Swap Remove

A solid state drive has a capacity of 5 gibibytes.

Give an expression to calculate the number of bits in 5 gibibytes. You do not need to do the calculation.

[2 marks]
Mark scheme

Award one mark for each of:

  • 5 × 1024^3 / 5 × 1024 × 1024 × 1024 / 5 × 2^30, for the number of bytes (1)
  • A fully correct expression with × 8 to convert bytes to bits, in any order, e.g. 5 × 1024^3 × 8, 8 × 5 × 2^30 (1)

Accept 5 × 1 073 741 824 × 8.

Accept 5 × 2^33 or 42 949 672 960 as a fully correct expression (2 marks).

Do not accept 5 × 1000^3 × 8, which uses decimal multiples.

Do not accept ÷ 8, which converts bits to bytes.

Example answers and how they were marked
Full marks2/2

8 × 5 × 2^30

Why: 5 × 2^30 is the number of bytes (1) and × 8 converts bytes to bits (1).

Some marks1/2

5 × 2^30

Why: Correct number of bytes using the binary multiple 2^30 (1), but no conversion to bits.

No marks0/2

5 × 1000^3 × 8

Why: Uses decimal 1000^3 instead of binary 1024^3, so the expression is not fully correct; no creditworthy point.

5Describe2 marksLow and High Level Languages Swap Remove

A programmer has written a program in assembly language.

Describe why it is necessary to translate the program into machine code before it can be run.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • The processor/CPU can only execute machine code/binary instructions (1) so the assembly instructions must be converted into machine code before the program can run (1)
  • Each assembly instruction/mnemonic matches/corresponds to one machine code instruction (1) so each line must be replaced with the machine code the processor executes (1)
  • The program is written using mnemonics (1) that must be translated into machine code for the processor to carry out the instructions (1)
  • The hardware/processor does not understand assembly language directly (1) so it must be translated into machine code that the processor can execute (1)

Do not accept 'assembly language is a low-level language'.

Do not accept 'it is hard to understand' or 'it is not English'.

Do not accept benefits, such as 'machine code runs faster' or 'the program will run more quickly'.

Do not accept 'an assembler/a translator converts it' on its own, with no reference to the processor only being able to execute machine code/binary.

Do not accept responses about high-level languages or about compilers/interpreters.

Example answers and how they were marked
Full marks2/2

The processor can only execute machine code, so the assembly instructions must be converted into machine code before the program can run.

Why: States what the processor can execute (1) and links it to converting the program's instructions into machine code (1).

Some marks1/2

Each assembly instruction matches one machine code instruction.

Why: Correct point about the one-to-one match (1) but no development saying that this is because the processor only executes machine code.

No marks0/2

Because an assembler translates assembly language into machine code.

Why: Names the translator but gives no reason tied to the processor only being able to execute machine code, so no mark; this is in the 'Do not accept' guidance.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 23
E-waste 15 questions Manufacturing Technology 8 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.