Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 604 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 7 marks

Pick again
Print
1Multiple choice1 markEmbedded Systems Swap Remove

Identify the device that is a general purpose computer.

[1 mark]
  • ADesktop computer
  • BMicrowave oven
  • CWashing machine
  • DTraffic light
Mark scheme
  • A Desktop computer (1)
  • The only correct answer is A. The correct answer is Desktop computer.
  • B is not correct because a microwave oven uses an embedded system, built into it, to control a dedicated function
  • C is not correct because a washing machine uses an embedded system, built into it, to control a dedicated function
  • D is not correct because a traffic light uses an embedded system, built into it, to control a dedicated function
Example answers and how they were marked
Full marks1/1

A Desktop computer

Why: Correct option: the question asks for the general purpose computer, and a desktop computer is general purpose; it does not use an embedded system to control a dedicated function (1).

No marks0/1

B Microwave oven

Why: Near miss: a microwave oven is the kind of device that uses an embedded system, built into it, to control a dedicated function, so it is not a general purpose computer; mark scheme says B is not correct.

No marks0/1

C Washing machine

Why: Misconception: because a washing machine contains a computer, it must be a general purpose computer; it actually uses an embedded system built into it for a dedicated function, so no mark.

2Short recall2 marksPrimary Memory Swap Remove

A computer is designed using the von Neumann stored program concept.

Define the term stored program concept.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • The program instructions and data are stored together in main memory/RAM (1)
  • The same memory is used for both instructions and data (1)
  • The instructions are fetched from main memory and executed by the CPU (1)
  • The instructions are fetched and executed one at a time / in sequence (1)
  • The program can be changed/replaced by loading new instructions into memory, without changing the hardware (1)

Do not accept the program is stored in secondary storage / on the hard disk.

Do not accept the program is stored in the CPU / in registers.

Example answers and how they were marked
Full marks2/2

The program instructions and the data are stored together in main memory, and the CPU fetches the instructions one at a time and executes them.

Why: Creditworthy point that instructions and data are stored in the same main memory (1) and the linked point that the CPU fetches and executes them from memory (1).

Some marks1/2

The program is held in the main memory (RAM) so that the computer can run it.

Why: Earns the point that the program instructions are stored in main memory (1), but does not say that the CPU fetches and executes them, so the second mark is not earned.

No marks0/2

The program is stored on the hard disk and loaded into the CPU when it is run.

Why: Both parts are misconceptions named in the Do not accept lines: the stored program concept keeps the instructions in main memory, not on secondary storage or in the CPU.

3Describe2 marksLow and High Level Languages Swap Remove

A device driver is software that allows the operating system to control a piece of hardware. Device drivers are often written in a low-level programming language.

Describe one reason why a low-level programming language is suitable for writing a device driver.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Instructions can manipulate/control the hardware/memory/registers directly (1) so the driver can control the specific device it is written for (1)
  • The code is written for one specific processor/architecture (1) so it works with the exact hardware it will control (1)
  • The programmer controls exactly how memory/registers are used (1) so the code is efficient and needs little memory, which suits a device that has limited memory (1)
  • Each instruction maps to one machine code instruction (1) so the driver code is small enough to fit in the memory of the device (1)

Extra detail, such as naming the device the driver controls, is not needed to earn the marks.

Do not accept 'it is closer to machine code' on its own: it must be developed to show how this helps the driver, e.g. it can control the hardware directly.

Do not accept 'it is faster/quicker' with no link to the hardware/device, e.g. the device responds quickly.

Do not accept 'it is easier to learn', 'it is easier to debug' or 'it takes less time to write'.

Example answers and how they were marked
Full marks2/2

Low-level instructions can manipulate the hardware and memory directly (1) so the driver can control the specific device it was written for, such as a sound card (1).

Why: Point about direct control of hardware/memory (1) linked to controlling the specific device (1). The named device is extra detail and is not needed.

Some marks1/2

Low-level instructions can manipulate the hardware directly.

Why: Correct point (1) but no linked development saying how this helps the device driver.

No marks0/2

It is closer to machine code so it runs faster than a high-level language.

Why: 'Closer to machine code' is not developed into how this helps the driver, and 'runs faster' is not linked to the hardware/device, so no mark.

4Explain2 marksProtocols & Layers Swap Remove

A bank's website can use HTTP or HTTPS.

Explain one benefit to a customer of the bank's website using HTTPS.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Data is encrypted/scrambled (1) so it cannot be read/understood if it is intercepted (1)
  • The customer's bank/personal details are kept secure/private (1) because the data is encrypted/scrambled during transmission (1)
  • The customer's login details/password cannot be read by an eavesdropper (1) because HTTPS encrypts/scrambles the data sent to and from the web server (1)

For both marks, the expansion must follow/associate with the statement.

Allow 'scrambled' as an alternative to 'encrypted'.

Do not accept 'it is more secure/safe' or 'the data is secure' on its own, without saying how it is made secure (e.g. encryption/scrambling).

Do not accept faster loading/speed, or claims that HTTPS stops viruses or always proves the website is genuine.

Example answers and how they were marked
Full marks2/2

The data is encrypted (1) so anyone intercepting it cannot read the customer's bank details (1).

Why: Linked point (1) and reason (1): encryption means intercepted data cannot be read.

Some marks1/2

The data is encrypted (1) so the website is secure.

Why: Point (1) for encryption, but 'secure' on its own is a near-miss that the mark scheme does not credit as the linked reason; it must say why, e.g. that intercepted data cannot be read.

No marks0/2

HTTPS is faster than HTTP (0) so the customer can log in more quickly.

Why: Speed is not a benefit of HTTPS and is named in a 'Do not accept' line, so no creditworthy point is given.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 18
Data Protection Act 14 questions Impact of AI 4 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.